RG2012P-2150-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-2150-C-T5 is a 215 Ohm ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications across -55°C to 155°C operating temperature range. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility while offering enhanced performance characteristics or improved availability.

Key Parameters

Parameter	Value
Resistance	215 Ohms
Tolerance	±0.25%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C to 155°C
Temperature Coefficient	±25ppm/°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG2012P-2150-C-T5 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Resistance value: 215 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (physical and electrical footprint compatibility)
Power rating: Minimum 0.125W (1/8W); higher ratings acceptable
Composition: Thin Film (electrical performance characteristics)
Operating temperature range: -55°C to 155°C minimum (full range coverage required)

Performance Enhancement Parameters:

Tolerance: ±0.25% or tighter (±0.1%, ±0.05%, ±0.02%)
Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C, ±5ppm/°C)

Compliance Parameters:

RoHS3 Compliant (mandatory)
Automotive AEC-Q200 (required for automotive applications)
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories: Susumu RG series upgrades offering improved tolerance and temperature coefficient specifications while maintaining the same package and operating range, and direct cross-reference alternatives from other manufacturers (TE Connectivity, YAGEO) providing equivalent electrical performance with different thermal or power characteristics.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Product Status	AEC-Q200	RoHS3
RG2012P-2150-C-T5	Susumu	215 Ω	±0.25%	0.125	±25	-55 to 155	0805	Obsolete	Yes	Yes
RG2012N-2150-B-T5	Susumu	215 Ω	±0.1%	0.125	±10	-55 to 155	0805	Active	Yes	Yes
RG2012N-2150-W-T1	Susumu	215 Ω	±0.05%	0.125	±10	-55 to 155	0805	Active	Yes	Yes
RG2012P-2150-B-T5	Susumu	215 Ω	±0.1%	0.125	±25	-55 to 155	0805	Active	Yes	Yes
RG2012P-2150-W-T5	Susumu	215 Ω	±0.05%	0.125	±25	-55 to 155	0805	Active	Yes	Yes
RG2012V-2150-B-T5	Susumu	215 Ω	±0.1%	0.125	±5	-55 to 155	0805	Active	Yes	Yes
RG2012V-2150-P-T1	Susumu	215 Ω	±0.02%	0.125	±5	-55 to 155	0805	Active	Yes	Yes
RG2012V-2150-W-T1	Susumu	215 Ω	±0.05%	0.125	±5	-55 to 155	0805	Active	Yes	Yes
RG2012V-2150-W-T5	Susumu	215 Ω	±0.05%	0.125	±5	-55 to 155	0805	Active	Yes	Yes
5-2176091-5	TE Connectivity	215 Ω	±0.1%	0.25	±25	-55 to 155	0805	Active	No	Yes
RT0805CRD07215RL	YAGEO	215 Ω	±0.25%	0.125	±25	-55 to 155	0805	Active	No	Yes

Engineering Selection Recommendations

Primary Substitutes (Susumu RG Series - Recommended):

The Susumu RG series substitutes maintain full compatibility with the RG2012P-2150-C-T5 across all critical parameters while offering active product status and enhanced specifications. Selection within this series depends on application tolerance and temperature stability requirements:

RG2012P-2150-B-T5: Direct upgrade offering ±0.1% tolerance with identical ±25ppm/°C temperature coefficient. Maintains same thermal performance characteristics as the original part while improving resistance accuracy. Highest inventory availability (5,818 units).
RG2012N-2150-B-T5: Provides ±0.1% tolerance with improved ±10ppm/°C temperature coefficient. Suitable for applications requiring enhanced thermal stability over the original ±25ppm/°C specification.
RG2012V-2150-B-T5: Delivers ±0.1% tolerance with superior ±5ppm/°C temperature coefficient. Recommended for precision applications where thermal drift minimization is critical.
RG2012P-2150-W-T5, RG2012N-2150-W-T1, RG2012V-2150-W-T1, RG2012V-2150-W-T5: Offer ±0.05% tolerance for applications requiring tighter resistance accuracy. Temperature coefficient varies by series (±25ppm/°C, ±10ppm/°C, or ±5ppm/°C).
RG2012V-2150-P-T1: Highest precision option with ±0.02% tolerance and ±5ppm/°C temperature coefficient. Reserved for precision measurement and calibration applications.

All Susumu RG series substitutes maintain AEC-Q200 automotive qualification and anti-sulfur coating.

Alternative Manufacturers (Cross-Reference):

5-2176091-5 (TE Connectivity): Electrically equivalent with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Rated for 0.25W (1/4W) power dissipation, providing thermal margin. Does not carry AEC-Q200 automotive qualification. Suitable for non-automotive applications or where higher power rating is beneficial.
RT0805CRD07215RL (YAGEO): Maintains identical ±0.25% tolerance and ±25ppm/°C temperature coefficient as the original part. Active product status with established supply chain. Does not carry AEC-Q200 automotive qualification. Suitable for direct replacement in non-automotive applications requiring equivalent specifications.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-2150-C-T5 be replaced with any 215 Ohm 0805 resistor?

A: No. Substitution requires exact match of resistance value (215 Ohms), package (0805), composition (thin film), and operating temperature range (-55°C to 155°C). For automotive applications, AEC-Q200 qualification is mandatory. Power rating must equal or exceed 0.125W.

Q: What is the difference between Susumu RG series variants (P, N, V)?

A: The letter designation indicates temperature coefficient performance. RG2012P series has ±25ppm/°C, RG2012N series has ±10ppm/°C, and RG2012V series has ±5ppm/°C. All maintain identical resistance, package, and operating temperature range. Selection depends on thermal stability requirements.

Q: Can I use RG2012P-2150-B-T5 as a direct replacement for RG2012P-2150-C-T5?

A: Yes. Both parts share identical specifications except tolerance: RG2012P-2150-B-T5 offers ±0.1% tolerance versus the original ±0.25%. This represents an upgrade in resistance accuracy with no electrical or mechanical incompatibility. Both carry AEC-Q200 qualification and anti-sulfur coating.

Q: Why does 5-2176091-5 have higher power rating (0.25W vs 0.125W)?

A: The TE Connectivity part is physically larger in height (0.026" vs 0.020" seated height) to accommodate higher power dissipation capability. While electrically compatible, this dimensional difference may affect PCB layout in space-constrained designs. Use only if layout permits.

Q: Is RT0805CRD07215RL suitable for automotive applications?

A: The YAGEO RT0805CRD07215RL does not carry AEC-Q200 automotive qualification. It is suitable for industrial and consumer applications requiring equivalent electrical specifications (215 Ohms ±0.25%, ±25ppm/°C). For automotive applications, Susumu RG series parts with AEC-Q200 certification are required.

Q: What is the significance of tolerance grades (±0.25%, ±0.1%, ±0.05%, ±0.02%)?

A: Tolerance specifies the maximum deviation from the nominal 215 Ohm value. Tighter tolerance (lower percentage) ensures more precise resistance values. Selection depends on circuit requirements: general applications tolerate ±0.25%, precision analog circuits benefit from ±0.1% or tighter, and calibration or reference circuits require ±0.05% or ±0.02%.

Q: Can I substitute a higher tolerance part (±0.1%) for a lower tolerance requirement (±0.25%)?

A: Yes. A part with ±0.1% tolerance meets all specifications of a circuit designed for ±0.25% tolerance. The tighter tolerance represents improved performance. Reverse substitution (lower tolerance for higher tolerance requirement) is not acceptable.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. No baking or desiccant storage is necessary prior to soldering.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 compliance status, meeting environmental and hazardous substance restrictions for electronic components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message