RG2012P-1960-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-1960-B-T1 is a 196 Ohms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and meets Automotive AEC-Q200 qualification standards. The part is classified as Obsolete, necessitating identification of active equivalent and substitute components for ongoing design requirements and procurement continuity.

Key Parameters

Parameter	Value
Resistance	196 Ohms
Tolerance	±0.1%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-1960-B-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 196 Ohms
Package type: 0805 (2012 Metric)
Composition: Thin Film
Operating temperature range: -55°C to 155°C minimum
RoHS3 compliance
Moisture Sensitivity Level: 1

Allowable Variation Parameters:

Tolerance: Equal to or tighter than ±0.1%
Power rating: Equal to or greater than 0.125W
Temperature coefficient: Any value within specified range
Automotive AEC-Q200 rating: Preferred but not mandatory for direct substitution
Packaging format: Tape & Reel acceptable for Tape & Reel applications

Substitute parts are categorized as Direct Equivalents (identical electrical and mechanical specifications) or Upgrades (improved performance characteristics while maintaining base compatibility).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	AEC-Q200	Status	Inventory
RG2012P-1960-B-T1	Susumu	196 Ω	±0.1%	0.125	±25	Yes	Obsolete	917
RG2012P-1960-B-T5	Susumu	196 Ω	±0.1%	0.125	±25	Yes	Active	881
RG2012N-1960-B-T5	Susumu	196 Ω	±0.1%	0.125	±10	Yes	Active	825
RG2012N-1960-W-T1	Susumu	196 Ω	±0.05%	0.125	±10	Yes	Active	976
RG2012P-1960-W-T5	Susumu	196 Ω	±0.05%	0.125	±25	Yes	Active	787
RG2012V-1960-B-T5	Susumu	196 Ω	±0.1%	0.125	±5	Yes	Active	732
RG2012V-1960-P-T1	Susumu	196 Ω	±0.02%	0.125	±5	Yes	Active	757
RG2012V-1960-W-T1	Susumu	196 Ω	±0.05%	0.125	±5	Yes	Active	881
RG2012V-1960-W-T5	Susumu	196 Ω	±0.05%	0.125	±5	Yes	Active	1034
5-2176091-2	TE Connectivity	196 Ω	±0.1%	0.25	±25	No	Active	1336
ERA-6AEB1960V	Panasonic	196 Ω	±0.1%	0.125	±25	Yes	Active	20477

Engineering Selection Recommendations

Direct Equivalent (Packaging Format Change): RG2012P-1960-B-T5 is the direct functional equivalent of RG2012P-1960-B-T1, differing only in packaging format (Tape & Reel versus bulk). This part maintains identical electrical specifications and AEC-Q200 automotive qualification. Selection is appropriate for applications requiring the original performance profile with active product status.

Susumu RG Series Upgrades: The RG2012N and RG2012V series variants offer improved temperature coefficient performance (±10ppm/°C and ±5ppm/°C respectively) while maintaining or exceeding tolerance specifications. These upgrades are suitable for applications requiring enhanced thermal stability. All variants maintain AEC-Q200 compliance and 0805 package compatibility.

Tolerance-Enhanced Alternatives: RG2012N-1960-W-T1, RG2012P-1960-W-T5, RG2012V-1960-W-T1, RG2012V-1960-W-T5, and RG2012V-1960-P-T1 provide tighter tolerance specifications (±0.05% or ±0.02%) compared to the original ±0.1%. These components are applicable in precision measurement and signal conditioning circuits where tolerance performance is critical.

Cross-Manufacturer Alternatives: ERA-6AEB1960V (Panasonic) provides functional equivalence with identical electrical specifications, AEC-Q200 rating, and superior inventory availability (20,477 units). This component is suitable for direct substitution in automotive applications.

Higher Power Rating Alternative: 5-2176091-2 (TE Connectivity) provides 0.25W (1/4W) power rating in the same 0805 package with matching resistance and tolerance. This component is applicable in applications where increased power dissipation capability is required. Note: This part does not carry AEC-Q200 automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-1960-B-T5 replace RG2012P-1960-B-T1 in production designs? A: Yes. RG2012P-1960-B-T5 is electrically and mechanically identical to RG2012P-1960-B-T1. The difference is packaging format (Tape & Reel versus bulk). Both maintain AEC-Q200 compliance and identical performance specifications.

Q: What is the difference between Susumu RG series variants (P, N, V)? A: The letter designation indicates temperature coefficient performance. RG2012P series has ±25ppm/°C, RG2012N series has ±10ppm/°C, and RG2012V series has ±5ppm/°C. All maintain the same resistance, tolerance, and power rating when the numeric portion is identical.

Q: Are tolerance upgrades (±0.05% or ±0.02%) backward compatible with designs specified for ±0.1%? A: Yes. Tighter tolerance specifications are backward compatible. A component with ±0.05% tolerance will satisfy any circuit requirement specified for ±0.1% tolerance. The actual resistance value will fall within a narrower range, improving circuit accuracy.

Q: Can ERA-6AEB1960V (Panasonic) be used as a direct replacement? A: Yes. ERA-6AEB1960V provides identical electrical specifications (196 Ohms ±0.1%, 0.125W), AEC-Q200 automotive qualification, and 0805 package compatibility. This component is suitable for direct substitution.

Q: What is the significance of the T1 and T5 suffixes in Susumu part numbers? A: These suffixes indicate packaging format. T1 denotes tape packaging, while T5 denotes tape and reel packaging. Electrical specifications remain identical between these variants.

Q: Is the TE Connectivity 5-2176091-2 suitable for automotive applications? A: This component does not carry AEC-Q200 automotive qualification. It is suitable for general industrial applications requiring 196 Ohms ±0.1% resistance in 0805 package with 0.25W power rating. Automotive applications should utilize AEC-Q200 qualified alternatives.

Q: What inventory considerations apply when selecting substitutes? A: ERA-6AEB1960V offers the highest inventory availability (20,477 units), followed by RG2012V-1960-W-T5 (1,034 units). All listed alternatives maintain active product status except the original RG2012P-1960-B-T1 (Obsolete).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message