RG2012P-1470-P-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-1470-P-T1 is a 147 Ohms ±0.02% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and stable performance across extended temperature ranges from -55°C to 155°C.

The RG2012P-1470-P-T1 is classified as obsolete. Locating equivalent substitute parts is necessary to support ongoing production requirements, maintenance operations, and design continuity where this specific model is no longer available from the manufacturer.

Substiute Parts

RG2012P-1470-P-T1

SusumuIn Stock: 1120RG2012P-1470-P-T1 Datasheet

Current PartRFQ

RG2012V-1470-P-T1

SusumuIn Stock: 903RG2012V-1470-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-1470-P-T1 is determined by the following critical parameters:

Electrical Parameters:

• Resistance value: 147 Ohms (exact match required)
• Tolerance: ±0.02% (exact match required)
• Power rating: 0.125W minimum (equal or higher acceptable)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Physical dimensions: 0.079" L x 0.049" W, Height 0.020" maximum (exact match required)

Environmental & Compliance Parameters:

• Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
• AEC-Q200 automotive qualification (required)
• Anti-sulfur coating (required)
• RoHS3 compliance (required)
• Moisture Sensitivity Level 1 (required)

Substitute parts must match all electrical and mechanical parameters exactly. Environmental ratings and compliance certifications must meet or exceed the original specification.

Parameter Comparison

Engineering Selection Recommendations

The RG2012V-1470-P-T1 is a direct functional equivalent to the RG2012P-1470-P-T1 for all critical electrical and mechanical parameters. Both components are manufactured by Susumu and share identical resistance, tolerance, power rating, package configuration, and physical dimensions.

The RG2012V-1470-P-T1 offers superior performance characteristics with a temperature coefficient of ±5ppm/°C compared to ±25ppm/°C in the original part, providing enhanced stability across the operating temperature range.

The substitute part holds active product status with current manufacturing availability, whereas the original RG2012P-1470-P-T1 is obsolete. Both components maintain full AEC-Q200 automotive qualification, anti-sulfur coating, ROHS3 compliance, and unlimited moisture sensitivity rating (MSL 1).

Direct substitution is supported for all applications where the RG2012P-1470-P-T1 was originally specified.

Frequently Asked Questions (FAQ)

Q: Can the RG2012V-1470-P-T1 be used as a direct replacement for the RG2012P-1470-P-T1?

A: Yes. Both components share identical electrical specifications (147 Ohms ±0.02%, 0.125W), mechanical configuration (0805 package, 2.00mm x 1.25mm), and environmental ratings (AEC-Q200, anti-sulfur, -55°C to 155°C). The substitute part is functionally equivalent for all applications.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and temperature coefficient. The RG2012P-1470-P-T1 is obsolete with a temperature coefficient of ±25ppm/°C, while the RG2012V-1470-P-T1 is active with a superior temperature coefficient of ±5ppm/°C. All other specifications are identical.

Q: Are there packaging differences between these parts?

A: The RG2012P-1470-P-T1 uses standard packaging, while the RG2012V-1470-P-T1 is supplied in Tape & Reel (TR) format. Both are 0805 (2012 Metric) package type with identical physical dimensions and termination configuration.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the RG2012P-1470-P-T1 and RG2012V-1470-P-T1 carry AEC-Q200 automotive qualification and anti-sulfur coating, suitable for automotive and high-reliability applications.

Q: Is the RG2012V-1470-P-T1 currently available?

A: Yes. The RG2012V-1470-P-T1 holds active product status with current manufacturing. The original RG2012P-1470-P-T1 is obsolete and no longer produced.

Q: Will the substitute part work in existing PCB designs without modification?

A: Yes. The RG2012V-1470-P-T1 maintains identical footprint dimensions (0.079" L x 0.049" W) and height (0.020" maximum), requiring no PCB layout changes or design modifications.

Q: Are both parts RoHS compliant?

A: Yes. Both the RG2012P-1470-P-T1 and RG2012V-1470-P-T1 are ROHS3 compliant with REACH Unaffected status.