RG2012P-121-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-121-B-T1 is a 120 Ohms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values. The part is currently listed as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility while meeting automotive and industrial standards.

Key Parameters

Parameter	Value
Resistance	120 Ohms
Tolerance	±0.1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG2012P-121-B-T1 is determined by strict equivalence in the following parameters:

Critical Parameters (Must Match):

Resistance value: 120 Ohms
Package / Case: 0805 (2012 Metric)
Power rating: 0.125W (1/8W)
Composition: Thin Film
Operating temperature range: -55°C ~ 155°C minimum
Automotive AEC-Q200 qualification
RoHS3 compliance

Allowable Variations:

Tolerance: Substitute parts with equal or tighter tolerance (±0.1% or better) are acceptable
Temperature coefficient: Substitute parts with equal or lower temperature coefficient are acceptable
Packaging format: Tape & Reel (TR) substitutes the original bulk packaging
Manufacturer: Different manufacturers producing equivalent specifications are acceptable

Substitute parts are grouped into two categories: direct equivalents (matching all specifications) and upgrades (improved specifications while maintaining base compatibility).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	AEC-Q200	Product Status
RG2012P-121-B-T1	Susumu	120 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Obsolete
RG2012P-121-B-T5	Susumu	120 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Active
RG2012N-121-B-T5	Susumu	120 Ω	±0.1%	0.125	±10	-55 ~ 155	0805	Yes	Active
RG2012N-121-W-T5	Susumu	120 Ω	±0.05%	0.125	±10	-55 ~ 155	0805	Yes	Active
RG2012P-121-W-T5	Susumu	120 Ω	±0.05%	0.125	±25	-55 ~ 155	0805	Yes	Active
RG2012V-121-B-T5	Susumu	120 Ω	±0.1%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-121-P-T1	Susumu	120 Ω	±0.02%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-121-W-T1	Susumu	120 Ω	±0.05%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-121-W-T5	Susumu	120 Ω	±0.05%	0.125	±5	-55 ~ 155	0805	Yes	Active
ERA-6AEB121V	Panasonic Electronic Components	120 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Active
MCU08050D1200BP100	Vishay Beyschlag/Draloric/BC Components	120 Ω	±0.1%	0.125	±25	-55 ~ 125	0805	No	Active

Engineering Selection Recommendations

Direct Equivalents (Identical Specifications):

RG2012P-121-B-T5 is the direct equivalent to RG2012P-121-B-T1, offering identical electrical specifications with active product status. This part maintains the same tolerance (±0.1%), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). The primary difference is packaging format (Tape & Reel) and active availability.

ERA-6AEB121V from Panasonic Electronic Components provides equivalent specifications with AEC-Q200 automotive qualification and active status. This part matches the 120 Ohms ±0.1% tolerance and 0.125W power rating. Operating temperature range extends to -55°C ~ 155°C. Height specification differs slightly (0.024" vs. 0.020" maximum seated height).

Upgrade Options (Enhanced Specifications):

RG2012V-121-B-T5 offers improved temperature coefficient (±5ppm/°C versus ±25ppm/°C) while maintaining ±0.1% tolerance and all other critical parameters. This upgrade reduces temperature-dependent resistance drift.

RG2012N-121-W-T5 and RG2012P-121-W-T5 provide tighter tolerance (±0.05%) with maintained power rating and package compatibility. RG2012N-121-W-T5 additionally features improved temperature coefficient (±10ppm/°C).

RG2012V-121-P-T1 represents the highest precision option with ±0.02% tolerance and ±5ppm/°C temperature coefficient, suitable for applications requiring maximum accuracy.

Cross-Manufacturer Alternative:

MCU08050D1200BP100 from Vishay Beyschlag/Draloric/BC Components provides equivalent 120 Ohms ±0.1% specifications in 0805 package. This part does not carry AEC-Q200 automotive qualification and operates to -55°C ~ 125°C (lower maximum temperature than the original). Selection of this part requires confirmation that automotive qualification is not required and the reduced upper temperature limit is acceptable.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-121-B-T5 be used as a direct replacement for RG2012P-121-B-T1?

A: Yes. RG2012P-121-B-T5 is a direct equivalent with identical electrical specifications (120 Ohms ±0.1%, 0.125W, ±25ppm/°C, -55°C ~ 155°C operating range). The primary difference is packaging format (Tape & Reel versus bulk). Both parts are 0805 (2012 Metric) package with two terminations and AEC-Q200 qualification.

Q: What is the difference between Susumu RG series variants (P, N, V)?

A: The letter designation indicates temperature coefficient performance. RG2012P series has ±25ppm/°C, RG2012N series has ±10ppm/°C, and RG2012V series has ±5ppm/°C. All maintain the same 120 Ohms resistance value and 0.125W power rating in 0805 package.

Q: Are tighter tolerance parts (±0.05%, ±0.02%) backward compatible?

A: Yes. Parts with tighter tolerance specifications are functionally compatible with designs requiring ±0.1% tolerance. The tighter tolerance represents improved accuracy and is acceptable in any application specifying ±0.1% or looser tolerance.

Q: Does the Panasonic ERA-6AEB121V have the same physical dimensions as the Susumu RG2012P-121-B-T1?

A: Both parts use 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Maximum seated height differs slightly: ERA-6AEB121V is 0.024" versus RG2012P-121-B-T1 at 0.020". This difference is within standard PCB assembly tolerances for 0805 components.

Q: Why does MCU08050D1200BP100 have a lower maximum operating temperature?

A: MCU08050D1200BP100 operates to -55°C ~ 125°C, compared to -55°C ~ 155°C for the original part. This represents a 30°C reduction in maximum temperature rating. This part is suitable only for applications where the upper temperature limit does not exceed 125°C.

Q: Is AEC-Q200 automotive qualification required for my application?

A: AEC-Q200 qualification is mandatory for automotive and high-reliability applications. All Susumu RG series and Panasonic ERA-6AEB121V parts carry this qualification. MCU08050D1200BP100 does not. Confirm application requirements before selecting non-qualified alternatives.

Q: What is the significance of Tape & Reel (TR) packaging?

A: Tape & Reel packaging is standard for automated PCB assembly processes. The original RG2012P-121-B-T1 used bulk packaging. All active substitute parts are supplied in Tape & Reel format, which is compatible with standard pick-and-place assembly equipment.

Q: Can I use RG2012V-121-P-T1 (±0.02% tolerance) in place of RG2012P-121-B-T1 (±0.1% tolerance)?

A: Yes. RG2012V-121-P-T1 provides superior accuracy (±0.02% versus ±0.1%) and improved temperature stability (±5ppm/°C versus ±25ppm/°C). This upgrade is functionally compatible with any design accepting ±0.1% tolerance and provides enhanced performance characteristics.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message