RG2012P-113-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-113-W-T5 is an 11 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is actively produced and maintained in inventory. Substitute parts are identified to provide alternative sourcing options when the primary manufacturer part becomes unavailable or when supply chain requirements necessitate qualified alternatives.

Substiute Parts

RG2012P-113-W-T5

SusumuIn Stock: 930RG2012P-113-W-T5 Datasheet

Current PartRFQ

ERA-6ARW113V

Panasonic Electronic ComponentsIn Stock: 5743ERA-6ARW113V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-113-W-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 11 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package format: 0805 (2012 Metric)
• Number of terminations: 2
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)

Compliance & Certification:

• Automotive AEC-Q200 qualification
• ROHS3 compliance
• Moisture Sensitivity Level 1

The ERA-6ARW113V from Panasonic Electronic Components meets all critical substitution criteria. Both parts are thin film resistors with identical resistance, tolerance, power rating, package format, and automotive qualification. The substitute part is functionally interchangeable within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012P-113-W-T5 and ERA-6ARW113V are active production parts with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on availability and supply chain requirements rather than functional differences.

The ERA-6ARW113V offers a lower temperature coefficient (±10ppm/°C versus ±25ppm/°C), which provides improved stability across the operating temperature range. However, both parts meet the specified tolerance and temperature operating range requirements.

The ERA-6ARW113V has a maximum seated height of 0.024" (0.60mm) compared to 0.020" (0.50mm) for the RG2012P-113-W-T5. This dimensional difference must be evaluated against PCB layout and assembly clearance constraints in applications with height-critical designs.

Both parts are suitable for direct substitution in automotive and industrial applications requiring thin film precision resistors with AEC-Q200 qualification in the 0805 package format.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6ARW113V be used as a direct replacement for the RG2012P-113-W-T5?

A: Yes. Both parts share identical electrical specifications (11 kOhms ±0.05%, 0.125W), package format (0805), and automotive AEC-Q200 qualification. The parts are functionally interchangeable for standard circuit applications.

Q: What is the difference in temperature coefficient between these parts?

A: The RG2012P-113-W-T5 has a temperature coefficient of ±25ppm/°C, while the ERA-6ARW113V has ±10ppm/°C. The lower coefficient of the Panasonic part provides better resistance stability across temperature variations. Both values are within acceptable ranges for most applications operating across the -55°C to 155°C temperature range.

Q: Are there physical dimension differences that affect PCB layout?

A: The maximum seated heights differ: RG2012P-113-W-T5 is 0.020" (0.50mm) and ERA-6ARW113V is 0.024" (0.60mm). This 0.004" (0.10mm) difference is negligible for most applications but must be considered in height-constrained designs such as stacked component assemblies or confined spaces.

Q: Do both parts meet automotive compliance requirements?

A: Yes. Both the RG2012P-113-W-T5 and ERA-6ARW113V carry AEC-Q200 automotive qualification and are ROHS3 compliant with Moisture Sensitivity Level 1 (unlimited shelf life).

Q: What packaging format is used for these parts?

A: Both parts are supplied in Tape & Reel (TR) format in the 0805 (2012 Metric) package. This format is standard for automated PCB assembly processes.

Q: Are there any anti-sulfur or special coating differences?

A: The RG2012P-113-W-T5 explicitly features anti-sulfur coating. The ERA-6ARW113V specification does not list anti-sulfur as a feature. In applications requiring sulfur resistance, this distinction should be evaluated against environmental exposure conditions.