RG2012P-1133-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-1133-D-T5 is a 113 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, package format, and automotive qualification requirements.

Substiute Parts

RG2012P-1133-D-T5

SusumuIn Stock: 970RG2012P-1133-D-T5 Datasheet

Current PartRFQ

ERA-6AED1133V

Panasonic Electronic ComponentsIn Stock: 3880ERA-6AED1133V Datasheet

DirectRFQ

ERA-6AEB1133V

Panasonic Electronic ComponentsIn Stock: 15614ERA-6AEB1133V Datasheet

UpgradeRFQ

RT0805BRD07113KL

YAGEOIn Stock: 11189RT0805BRD07113KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-1133-D-T5 is determined by the following critical parameters:

Electrical Specifications: Resistance value (113 kOhms), tolerance (±0.5% or tighter), power rating (0.125W minimum), and temperature coefficient (±25ppm/°C) must be maintained or improved.

Mechanical Compatibility: Package format must be 0805 (2012 Metric) with matching physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and seated height not exceeding 0.024" (0.60mm).

Composition & Technology: Thin film construction is required to maintain performance characteristics.

Compliance & Ratings: AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating are mandatory for direct substitution in automotive applications.

Substitute parts are grouped into two categories: direct equivalents matching the ±0.5% tolerance specification, and upgrade alternatives offering improved ±0.1% tolerance while maintaining all other parameters.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Substitution:

ERA-6AED1133V (Panasonic Electronic Components) is a direct functional equivalent to the RG2012P-1133-D-T5. Both parts maintain identical electrical specifications (113 kOhms ±0.5% tolerance, 0.125W power rating, ±25ppm/°C temperature coefficient), mechanical dimensions, and automotive AEC-Q200 qualification. The ERA-6AED1133V is active in production with ROHS3 compliance and MSL 1 rating. The seated height of 0.024" (0.60mm) is within acceptable tolerance for standard PCB assembly processes.

Upgrade Substitution Options:

ERA-6AEB1133V (Panasonic Electronic Components) and RT0805BRD07113KL (YAGEO) both offer improved tolerance specification of ±0.1% compared to the original ±0.5% tolerance. These parts maintain all other electrical and mechanical parameters, including the 0.125W power rating, ±25ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. Both are active products with ROHS3 compliance and MSL 1 rating. The ERA-6AEB1133V carries automotive AEC-Q200 qualification, while the RT0805BRD07113KL does not specify this rating. Selection between upgrade options depends on whether automotive AEC-Q200 qualification is required for the application.

All substitute parts are available in Tape & Reel (TR) packaging format and are suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AED1133V be used as a direct replacement for RG2012P-1133-D-T5?

A: Yes. The ERA-6AED1133V is a direct equivalent. Both parts have identical resistance (113 kOhms), tolerance (±0.5%), power rating (0.125W), package format (0805), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive AEC-Q200 qualification. Physical dimensions and termination count are identical.

Q: What is the difference between the direct equivalent and upgrade options?

A: The direct equivalent ERA-6AED1133V matches the original ±0.5% tolerance specification. The upgrade options ERA-6AEB1133V and RT0805BRD07113KL offer improved ±0.1% tolerance, providing tighter resistance accuracy. All other electrical and mechanical parameters remain identical. Upgrade parts are suitable for applications requiring higher precision.

Q: Does the seated height difference affect PCB assembly compatibility?

A: The RG2012P-1133-D-T5 has a maximum seated height of 0.020" (0.50mm), while substitute parts have a maximum seated height of 0.024" (0.60mm). This 0.004" (0.10mm) difference is within standard PCB assembly tolerances and does not affect compatibility with standard 0805 package footprints.

Q: Are all substitute parts automotive-qualified?

A: ERA-6AED1133V and ERA-6AEB1133V both carry AEC-Q200 automotive qualification. RT0805BRD07113KL does not specify automotive qualification in the provided specifications. For automotive applications requiring AEC-Q200 compliance, select ERA-6AED1133V or ERA-6AEB1133V.

Q: Can these parts be used interchangeably in production?

A: Yes, all listed substitute parts are functionally interchangeable with the RG2012P-1133-D-T5 in standard applications. All parts are active products with ROHS3 compliance, MSL 1 rating, and identical package format (0805 Tape & Reel). Verify automotive qualification requirements before selecting between direct equivalent and upgrade options.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the main part and all substitutes, have MSL 1 (Unlimited) rating. This indicates no moisture sensitivity restrictions and no special storage or handling requirements.