RG2012P-1130-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-1130-W-T1 is a 113 Ohms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur construction. The part is currently classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and field replacement requirements.

Substiute Parts

RG2012P-1130-W-T1

SusumuIn Stock: 926RG2012P-1130-W-T1 Datasheet

Current PartRFQ

RG2012P-1130-W-T5

SusumuIn Stock: 783RG2012P-1130-W-T5 Datasheet

DirectRFQ

RG2012N-1130-W-T1

SusumuIn Stock: 1109RG2012N-1130-W-T1 Datasheet

UpgradeRFQ

RG2012V-1130-P-T1

SusumuIn Stock: 1040RG2012V-1130-P-T1 Datasheet

UpgradeRFQ

RG2012V-1130-W-T1

SusumuIn Stock: 1194RG2012V-1130-W-T1 Datasheet

UpgradeRFQ

RG2012V-1130-W-T5

SusumuIn Stock: 952RG2012V-1130-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-1130-W-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 113 Ohms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C
• Automotive AEC-Q200 qualification
• Anti-sulfur construction
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: ±0.05% or tighter (±0.02%)
• Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C, ±5ppm/°C)
• Packaging format: Tape & Reel (TR) acceptable for bulk applications
• Product status: Active substitutes preferred over obsolete

All identified substitute parts maintain identical electrical performance specifications and mechanical compatibility while offering improved or equivalent temperature stability characteristics and active product status.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Identical Electrical Specifications):

RG2012P-1130-W-T5 provides direct functional equivalence to the RG2012P-1130-W-T1 with identical electrical parameters (113 Ohms, ±0.05% tolerance, ±25ppm/°C temperature coefficient). The primary distinction is packaging format (Tape & Reel versus bulk) and active product status. This part is suitable for applications requiring no design modification.

Enhanced Performance Substitutes:

RG2012N-1130-W-T1 offers improved temperature stability (±10ppm/°C versus ±25ppm/°C) while maintaining all other electrical specifications. This component is recommended for applications sensitive to temperature-induced resistance drift.

RG2012V-1130-W-T1 and RG2012V-1130-W-T5 provide superior temperature coefficient performance (±5ppm/°C) with identical tolerance and resistance values. These parts are suitable for precision measurement circuits and temperature-critical applications.

RG2012V-1130-P-T1 delivers the highest precision specification with ±0.02% tolerance and ±5ppm/°C temperature coefficient, appropriate for applications requiring maximum accuracy and stability.

All substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, RoHS3 compliance, and identical mechanical dimensions. Selection should be based on application temperature stability requirements and packaging format compatibility with assembly processes.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-1130-W-T5 be used as a direct replacement for RG2012P-1130-W-T1?

A: Yes. Both parts share identical electrical specifications (113 Ohms, ±0.05% tolerance, ±25ppm/°C temperature coefficient, 0.125W power rating) and mechanical compatibility (0805 package). The difference is packaging format (Tape & Reel versus bulk) and product status (active versus obsolete). No circuit design changes are required.

Q: What is the difference between the RG2012N and RG2012V series substitutes?

A: The RG2012N-1130-W-T1 provides intermediate temperature stability at ±10ppm/°C. The RG2012V series offers enhanced stability at ±5ppm/°C. Both maintain the same 113 Ohm resistance and ±0.05% tolerance as the original part. Selection depends on application temperature sensitivity requirements.

Q: Is RG2012V-1130-P-T1 compatible with the original design?

A: Yes. This part is mechanically and electrically compatible. It provides superior specifications with ±0.02% tolerance (versus ±0.05%) and ±5ppm/°C temperature coefficient. It can be used as a direct replacement with improved performance characteristics.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All identified substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, and identical operating temperature range (-55°C ~ 155°C).

Q: What packaging format should be selected for production assembly?

A: RG2012P-1130-W-T5, RG2012N-1130-W-T1, RG2012V-1130-P-T1, RG2012V-1130-W-T1, and RG2012V-1130-W-T5 are supplied in Tape & Reel format, suitable for automated pick-and-place assembly. The original RG2012P-1130-W-T1 was supplied in bulk format. Tape & Reel packaging is standard for current production.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part specifications.

Q: Which substitute offers the best temperature stability?

A: RG2012V-1130-P-T1 and RG2012V-1130-W-T1 both provide ±5ppm/°C temperature coefficient, the lowest among available substitutes. RG2012V-1130-P-T1 additionally offers ±0.02% tolerance for maximum precision applications.