RG2012P-103-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-103-W-T5 is a 10 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package manufactured by Susumu. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur coating and operates across -55°C to 155°C. The part is active in production status with 667 units currently in stock. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate enhanced performance characteristics.

Substiute Parts

RG2012P-103-W-T5

SusumuIn Stock: 696RG2012P-103-W-T5 Datasheet

Current PartRFQ

RG2012V-103-P-T1

SusumuIn Stock: 11321RG2012V-103-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-103-W-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 10 kOhms
• Package type: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C
• Automotive rating: AEC-Q200
• Anti-sulfur feature
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter (lower) than ±0.05%
• Temperature coefficient: May be equal to or lower than ±25ppm/°C

The substitute part RG2012V-103-P-T1 meets all mandatory matching parameters and provides enhanced performance through tighter tolerance (±0.02% versus ±0.05%) and improved temperature coefficient (±5ppm/°C versus ±25ppm/°C). These improvements represent upgrades that maintain full compatibility while offering superior stability characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012P-103-W-T5 and RG2012V-103-P-T1 are active production components manufactured by Susumu with full AEC-Q200 automotive qualification and ROHS3 compliance. The parts are electrically and mechanically interchangeable within the 0805 package footprint.

The RG2012V-103-P-T1 substitute provides enhanced performance specifications through improved tolerance (±0.02% versus ±0.05%) and superior temperature coefficient stability (±5ppm/°C versus ±25ppm/°C). These characteristics make the substitute part suitable for applications requiring tighter resistance stability across temperature variations and tighter initial tolerance bands.

Selection between these parts depends on application-specific requirements for tolerance and temperature stability. Both parts maintain identical physical dimensions, power ratings, operating temperature ranges, and automotive compliance certifications, ensuring direct substitution capability at the circuit board level.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-103-P-T1 be used as a direct replacement for RG2012P-103-W-T5?

A: Yes. Both parts share identical resistance values (10 kOhms), package dimensions (0805), power ratings (0.125W), operating temperature ranges (-55°C to 155°C), and AEC-Q200 automotive qualifications. The substitute part features improved tolerance and temperature coefficient specifications, making it a compatible upgrade.

Q: What are the key differences between these two parts?

A: The primary differences are tolerance specification and temperature coefficient. RG2012V-103-P-T1 provides ±0.02% tolerance compared to ±0.05% for RG2012P-103-W-T5, and a temperature coefficient of ±5ppm/°C versus ±25ppm/°C. Both parts are thin film, anti-sulfur, AEC-Q200 rated resistors in identical packages.

Q: Are there any PCB layout or assembly considerations when substituting these parts?

A: No. Both parts use the 0805 (2012 Metric) package with identical physical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.020" or 0.50mm). PCB footprints and assembly processes remain unchanged.

Q: Do both parts meet automotive compliance requirements?

A: Yes. Both RG2012P-103-W-T5 and RG2012V-103-P-T1 carry AEC-Q200 automotive qualification, anti-sulfur coating, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which part should be selected for high-precision applications?

A: RG2012V-103-P-T1 is suitable for applications requiring tighter tolerance control and improved temperature stability due to its ±0.02% tolerance and ±5ppm/°C temperature coefficient specifications.

Q: Are these parts available in different packaging formats?

A: Both parts are supplied in Tape & Reel (TR) packaging format. The packaging format remains consistent between the main part and substitute.