RG2012P-101-P-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-101-P-T1 is a 100 Ohms ±0.02% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and stable performance across extended temperature ranges (-55°C to 155°C).

The RG2012P-101-P-T1 is classified as Obsolete. Locating equivalent substitute components is necessary to support ongoing production requirements, maintenance operations, and design continuity where this part number is specified.

Substiute Parts

RG2012P-101-P-T1

SusumuIn Stock: 686RG2012P-101-P-T1 Datasheet

Current PartRFQ

RG2012V-101-P-T1

SusumuIn Stock: 6592RG2012V-101-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-101-P-T1 is determined by the following critical parameters:

Electrical Parameters:

• Resistance value: 100 Ohms (exact match required)
• Tolerance: ±0.02% (exact match required)
• Power rating: 0.125W minimum (equal or higher acceptable)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) (exact match required)
• Physical dimensions: 0.079" L x 0.049" W, 0.020" max height (exact match required)
• Number of terminations: 2 (exact match required)

Compliance & Environmental Parameters:

• Composition: Thin Film (exact match required)
• Features: Anti-Sulfur, Automotive AEC-Q200 (exact match required)
• Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (exact match required)

The RG2012V-101-P-T1 meets all substitution criteria and is classified as an equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The RG2012V-101-P-T1 is a direct functional equivalent to the RG2012P-101-P-T1 for all electrical and mechanical applications. Both components share identical resistance, tolerance, power rating, package dimensions, and automotive AEC-Q200 qualification.

Product Status Consideration: The RG2012P-101-P-T1 is classified as Obsolete, while the RG2012V-101-P-T1 is Active. The substitute part maintains full production availability and supply chain continuity.

Performance Enhancement: The RG2012V-101-P-T1 provides improved temperature coefficient performance (±5ppm/°C versus ±25ppm/°C), resulting in superior temperature stability across the operating range.

Compliance Alignment: Both parts maintain identical ROHS3 compliance, REACH status, and Moisture Sensitivity Level (MSL 1), ensuring regulatory and environmental requirements are met without modification.

Packaging Consideration: The substitute part is supplied in Tape & Reel (TR) format, which is standard for high-volume production and automated assembly operations. The main part was supplied in bulk packaging format.

Frequently Asked Questions (FAQ)

Q: Can the RG2012V-101-P-T1 be used as a direct replacement for the RG2012P-101-P-T1 in existing designs?

A: Yes. The RG2012V-101-P-T1 is electrically and mechanically identical to the RG2012P-101-P-T1. All critical parameters including resistance value, tolerance, power rating, package dimensions, and automotive qualification are matched. The substitute part is suitable for direct board-level substitution without design modification.

Q: What is the difference between the two part numbers?

A: The primary differences are product status and packaging format. The RG2012P-101-P-T1 is Obsolete and supplied in bulk packaging, while the RG2012V-101-P-T1 is Active and supplied in Tape & Reel format. The RG2012V-101-P-T1 also features improved temperature coefficient performance (±5ppm/°C versus ±25ppm/°C).

Q: Are both parts qualified to the same automotive standards?

A: Yes. Both the RG2012P-101-P-T1 and RG2012V-101-P-T1 carry AEC-Q200 automotive qualification and are rated for the same operating temperature range (-55°C to 155°C).

Q: Does the Tape & Reel packaging of the substitute part affect compatibility?

A: No. Tape & Reel packaging is a supply format that affects handling and assembly logistics but does not alter component electrical or mechanical characteristics. The physical component dimensions and performance remain identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical Moisture Sensitivity Level (MSL 1) ratings. Regulatory and environmental compliance requirements are fully satisfied by either part.

Q: Why is the RG2012P-101-P-T1 marked as Obsolete?

A: The RG2012P-101-P-T1 has been discontinued by the manufacturer. The RG2012V-101-P-T1 represents the active production equivalent and is the recommended source for ongoing supply requirements.