RG2012N-9762-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-9762-C-T5 is a 97.6 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in temperature ranges from -55°C to 155°C.

The RG2012N-9762-C-T5 is classified as obsolete. Equivalent and substitute parts are available from Susumu's active product lines and from alternative manufacturers, offering improved tolerance specifications and enhanced packaging options while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012N-9762-C-T5

SusumuIn Stock: 840RG2012N-9762-C-T5 Datasheet

Current PartRFQ

RG2012N-9762-B-T5

SusumuIn Stock: 982RG2012N-9762-B-T5 Datasheet

UpgradeRFQ

RG2012N-9762-W-T1

SusumuIn Stock: 1003RG2012N-9762-W-T1 Datasheet

UpgradeRFQ

RG2012N-9762-W-T5

SusumuIn Stock: 939RG2012N-9762-W-T5 Datasheet

UpgradeRFQ

TNPW080597K6BYEA

Vishay DaleIn Stock: 832TNPW080597K6BYEA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-9762-C-T5 is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Resistance value: 97.6 kOhms (exact match required)
• Tolerance: ±0.25% or better (tighter tolerance acceptable)
• Power rating: 0.125W minimum (higher ratings acceptable)
• Temperature coefficient: ±10ppm/°C (matching specification)

Mechanical Compatibility Requirements:

• Package: 0805 (2012 Metric) form factor (exact match required)
• Composition: Thin film construction
• Termination count: 2 terminations

Compliance & Environmental Requirements:

• AEC-Q200 automotive qualification (required)
• Anti-sulfur coating (required)
• RoHS3 compliance (required)
• Operating temperature range: -55°C minimum to 155°C minimum

Substitute parts must satisfy all electrical, mechanical, and compliance criteria. Tolerance improvements and power rating increases are acceptable substitutions. Packaging format changes (tape & reel versus bulk) do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

RG2012N-9762-B-T5 (Susumu, ±0.1% Tolerance)

This substitute offers improved tolerance specification (±0.1% versus ±0.25%) while maintaining identical electrical and mechanical parameters. The component is in active production status with established supply chain availability. Suitable for applications requiring tighter resistance tolerance without modification to circuit design or layout.

RG2012N-9762-W-T5 and RG2012N-9762-W-T1 (Susumu, ±0.05% Tolerance)

These substitutes provide the highest tolerance specification (±0.05%) available within the Susumu RG series. Both parts are in active production. The difference between these two variants is packaging format (T5 and T1 designations); electrical and mechanical specifications are identical. Selection between these variants depends on procurement and assembly requirements.

TNPW080597K6BYEA (Vishay Dale, ±0.1% Tolerance, 0.26W Power Rating)

This cross-manufacturer substitute from Vishay Dale provides ±0.1% tolerance with increased power rating (0.26W versus 0.125W). The component maintains AEC-Q200 qualification, anti-sulfur coating, and thin film construction. Operating temperature range extends to 175°C (versus 155°C for Susumu variants). Height specification is marginally increased (0.022" versus 0.020" maximum seated height). This substitute is suitable for applications with higher power dissipation requirements or extended temperature operation.

All substitute parts maintain full compatibility with the original RG2012N-9762-C-T5 in terms of package footprint, electrical performance envelope, and automotive qualification requirements.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-9762-B-T5 be used as a direct replacement for RG2012N-9762-C-T5?

A: Yes. The RG2012N-9762-B-T5 is a direct substitute. It maintains identical resistance value (97.6 kOhms), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). The improved tolerance specification (±0.1% versus ±0.25%) provides enhanced accuracy without requiring circuit modifications.

Q: What is the difference between RG2012N-9762-W-T5 and RG2012N-9762-W-T1?

A: The electrical and mechanical specifications are identical between these two parts. Both provide 97.6 kOhms ±0.05% in 0805 package with 0.125W power rating. The T5 and T1 designations refer to packaging format differences. Selection depends on procurement requirements and assembly line compatibility.

Q: Can TNPW080597K6BYEA replace RG2012N-9762-C-T5 in all applications?

A: TNPW080597K6BYEA is electrically and mechanically compatible for most applications. The component maintains 97.6 kOhms resistance, ±0.1% tolerance, 0805 package, and AEC-Q200 qualification. The increased power rating (0.26W) and extended temperature range (-55°C to 175°C) are beneficial for demanding applications. The maximum seated height is marginally higher (0.022" versus 0.020"), which may require verification in space-constrained layouts.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (RG2012N-9762-B-T5, RG2012N-9762-W-T5, RG2012N-9762-W-T1, and TNPW080597K6BYEA) are RoHS3 compliant with Moisture Sensitivity Level 1 (unlimited shelf life).

Q: What is the advantage of selecting a tighter tolerance substitute?

A: Tighter tolerance specifications (±0.1% or ±0.05%) reduce resistance value variation across production batches and temperature ranges. This improves circuit accuracy and performance consistency, particularly in precision analog circuits, measurement instrumentation, and signal conditioning applications where resistance accuracy directly affects system performance.

Q: Is the height difference between TNPW080597K6BYEA (0.022") and the Susumu parts (0.020") significant?

A: The 0.002" (0.05mm) height difference is minimal for most applications. However, in space-constrained designs with tight component clearances or specific assembly requirements, this difference should be verified against mechanical design constraints and assembly equipment specifications.

Q: Why is RG2012N-9762-C-T5 marked as obsolete?

A: The RG2012N-9762-C-T5 has been superseded by improved variants within Susumu's active product line. The substitute parts offer better tolerance specifications, enhanced availability, and active manufacturing support. Existing inventory remains available, but new designs should specify active product variants.