RG2012N-9761-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-9761-W-T5 is a 9.76 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and meets AEC-Q200 automotive qualification standards. The part is actively manufactured and maintained in production status. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory requirements necessitate alternative procurement channels.

Substiute Parts

RG2012N-9761-W-T5

SusumuIn Stock: 1130RG2012N-9761-W-T5 Datasheet

Current PartRFQ

RG2012N-9761-W-T1

SusumuIn Stock: 1769RG2012N-9761-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012N-9761-W-T5 is determined by strict equivalence across the following critical parameters:

• Resistance Value: 9.76 kOhms (exact match required)
• Tolerance: ±0.05% (exact match required)
• Power Rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±10ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Qualification: AEC-Q200 (exact match required)
• Anti-Sulfur Feature: Present (exact match required)

The substitute part RG2012N-9761-W-T1 meets all critical electrical and mechanical parameters. The difference between these part numbers relates to packaging reel specifications (T5 versus T1 reel configuration), which do not affect component performance or electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RG2012N-9761-W-T5 and RG2012N-9761-W-T1 are active production components manufactured by Susumu with identical electrical specifications and mechanical dimensions. Both parts carry ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial and automotive applications.

Selection between these parts is based on packaging reel configuration requirements. The T5 and T1 designations specify different reel formats within the Tape & Reel (TR) packaging standard. Component selection should align with assembly equipment specifications and tape reel compatibility requirements.

Both parts maintain AEC-Q200 automotive qualification and anti-sulfur construction, ensuring suitability for automotive-grade applications requiring high reliability and environmental resistance.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-9761-W-T1 be used as a direct replacement for RG2012N-9761-W-T5 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The difference between T5 and T1 designations refers to reel configuration only and does not affect component performance, electrical characteristics, or circuit functionality.

Q: What is the significance of the T5 and T1 suffix in the part number?

A: The T5 and T1 suffixes specify the tape reel format used for packaging in Tape & Reel (TR) configuration. These designations relate to reel diameter, tape width, and component spacing on the reel. Component selection should match assembly equipment specifications.

Q: Are both parts suitable for automotive applications?

A: Yes. Both RG2012N-9761-W-T5 and RG2012N-9761-W-T1 meet AEC-Q200 automotive qualification standards and feature anti-sulfur construction for enhanced reliability in automotive environments.

Q: Do these parts have identical compliance certifications?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected. Moisture Sensitivity Level is 1 (Unlimited) for both parts, indicating no moisture sensitivity restrictions.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across -55°C to 155°C, meeting automotive temperature requirements for extended operating environments.

Q: Are there any differences in tolerance or temperature coefficient between these parts?

A: No. Both parts maintain ±0.05% tolerance and ±10ppm/°C temperature coefficient, ensuring identical precision and thermal stability characteristics.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly equipment is compatible with the specified reel format (T5 or T1). Electrical and mechanical compatibility is complete between both parts.