RG2012N-9531-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-9531-W-T5 is a 9.53 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and stable performance across extended temperature ranges (-55°C to 155°C). The part is actively manufactured and available in production quantities. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility with the original specification.

Substiute Parts

RG2012N-9531-W-T5

SusumuIn Stock: 811RG2012N-9531-W-T5 Datasheet

Current PartRFQ

RG2012N-9531-W-T1

SusumuIn Stock: 2028RG2012N-9531-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-9531-W-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 9.53 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height seated (max): 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Features:

• Composition: Thin Film
• Anti-sulfur coating
• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The identified substitute part maintains identical electrical specifications, mechanical compatibility, and automotive-grade certifications, differing only in packaging configuration (Tape & Reel variant designation).

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012N-9531-W-T5 and RG2012N-9531-W-T1 are active production components manufactured by Susumu with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements rather than technical performance differences.

RG2012N-9531-W-T5 is suitable for applications where the specific tape & reel variant designation is required or preferred by procurement specifications.

RG2012N-9531-W-T1 provides an equivalent alternative with higher current inventory availability (1932 pcs vs. 738 pcs), supporting continuity of supply for high-volume production requirements.

Both parts satisfy automotive AEC-Q200 qualification, RoHS3 compliance, and REACH unaffected status. The thin film construction with anti-sulfur coating and ±0.05% tolerance ensures performance in precision analog circuits, measurement instrumentation, and automotive control systems operating across the full -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-9531-W-T1 be used as a direct replacement for RG2012N-9531-W-T5?

A: Yes. Both parts are electrically and mechanically identical. They share the same resistance value (9.53 kOhms), tolerance (±0.05%), power rating (0.125W), package type (0805), and all performance specifications. The difference in part number designation reflects tape & reel packaging variant only.

Q: Are there any differences in thermal performance between these parts?

A: No. Both parts have identical temperature coefficients (±10ppm/°C) and operating temperature ranges (-55°C to 155°C). Thermal behavior is equivalent.

Q: Do both parts meet automotive standards?

A: Yes. Both RG2012N-9531-W-T5 and RG2012N-9531-W-T1 carry AEC-Q200 automotive qualification and are suitable for automotive applications.

Q: What is the significance of the T5 and T1 designations in the part numbers?

A: These designations indicate different tape & reel packaging configurations within the same product line. Both are standard Susumu packaging variants for the RG series 0805 resistor.

Q: Are moisture sensitivity considerations the same for both parts?

A: Yes. Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity precautions are required during storage or handling.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Identical package dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and height (0.020" max seated) ensure mechanical and electrical interchangeability in PCB layouts and assembly processes.

Q: Are there compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8533.21.0030).