RG2012N-753-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-753-D-T5 is a 75 kOhms ±0.5% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in automotive and industrial environments. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, power rating, package), mechanical compatibility (0805 form factor), and automotive qualification standards. Substitute parts with improved tolerance specifications or alternative manufacturers are available for applications requiring enhanced precision or supply chain flexibility.

Substiute Parts

RG2012N-753-D-T5

SusumuIn Stock: 1000RG2012N-753-D-T5 Datasheet

Current PartRFQ

RG2012N-753-W-T1

SusumuIn Stock: 2104RG2012N-753-W-T1 Datasheet

UpgradeRFQ

ERA-6ARB753V

Panasonic Electronic ComponentsIn Stock: 21218ERA-6ARB753V Datasheet

UpgradeRFQ

ERA-6ARW753V

Panasonic Electronic ComponentsIn Stock: 6088ERA-6ARW753V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 75 kOhms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

Variable Parameters Allowing Substitution:

• Tolerance: Substitute parts with equal or tighter (lower) tolerance values are functionally compatible
• Manufacturer: Alternative manufacturers (Panasonic, Susumu) with identical electrical and mechanical specifications
• Height variation: Seated height up to 0.024" (0.60mm) is compatible with 0.020" (0.50mm) maximum specification

All identified substitute parts maintain full compatibility with the RG2012N-753-D-T5 in terms of electrical performance, thermal characteristics, and mechanical fit within standard PCB assembly processes.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active production status and full AEC-Q200 automotive qualification, ensuring continued availability and compliance with automotive reliability standards.

RG2012N-753-W-T1 (Susumu): Direct manufacturer upgrade within the same product series. Identical mechanical and thermal specifications with improved tolerance (±0.05% versus ±0.05%). Maintains anti-sulfur coating and same seated height. Recommended for applications requiring tighter tolerance control while maintaining single-manufacturer sourcing.

ERA-6ARB753V (Panasonic): Cross-manufacturer substitute with ±0.1% tolerance specification. Provides intermediate precision between the standard and premium tolerance grades. Seated height of 0.024" (0.60mm) is compatible with standard PCB assembly clearances. Suitable for applications where Panasonic supply chain preference or inventory availability is a factor.

ERA-6ARW753V (Panasonic): Cross-manufacturer substitute with ±0.05% tolerance specification, matching the precision of RG2012N-753-W-T1. Seated height of 0.024" (0.60mm) is compatible with standard PCB assembly clearances. Recommended for high-precision applications requiring Panasonic component sourcing or when ERA-6A series integration is preferred.

All substitute parts are ROHS3 compliant with MSL 1 rating, ensuring compatibility with standard surface mount assembly processes and long-term storage without moisture bake-out requirements.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARB753V and ERA-6ARW753V be used interchangeably with RG2012N-753-D-T5?

A: Yes. Both Panasonic parts maintain identical electrical specifications (75 kOhms, 0.125W, ±10ppm/°C temperature coefficient, -55°C to 155°C operating range) and package form factor (0805). The tolerance specifications are equal or tighter. The 0.024" (0.60mm) seated height is compatible with standard 0.050" (1.27mm) PCB pitch and assembly processes.

Q: What is the difference between RG2012N-753-D-T5 and RG2012N-753-W-T1?

A: Both are Susumu RG series 75 kOhms 0805 thin film resistors with identical mechanical and thermal characteristics. The primary difference is tolerance: RG2012N-753-D-T5 specifies ±0.5% while RG2012N-753-W-T1 specifies ±0.05%. RG2012N-753-W-T1 is a precision upgrade within the same manufacturer series.

Q: Are there tolerance differences between the substitute parts?

A: Yes. RG2012N-753-D-T5 specifies ±0.5% tolerance. RG2012N-753-W-T1 and ERA-6ARW753V both specify ±0.05% tolerance. ERA-6ARB753V specifies ±0.1% tolerance. All tolerance values are tighter than or equal to the original specification, ensuring compatibility.

Q: Do the Panasonic parts have the anti-sulfur coating feature?

A: The provided specifications for ERA-6ARB753V and ERA-6ARW753V do not list anti-sulfur coating as a feature. RG2012N-753-D-T5 and RG2012N-753-W-T1 both include anti-sulfur coating. For applications requiring anti-sulfur protection, Susumu parts are specified.

Q: Are all parts suitable for automotive applications?

A: Yes. All listed parts carry AEC-Q200 automotive qualification, confirming suitability for automotive-grade reliability requirements across the -55°C to 155°C operating temperature range.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry this rating, eliminating moisture-related handling constraints during storage and assembly.

Q: Can the 0.024" seated height of Panasonic parts affect PCB assembly?

A: No. The 0.024" (0.60mm) seated height of ERA-6ARB753V and ERA-6ARW753V is compatible with standard 0805 package assembly processes and PCB design clearances. This minor height variation does not impact reflow soldering, wave soldering, or component placement.