RG2012N-620-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-620-W-T5 is a 62 Ohm ±0.05% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur construction. The part is currently in active production status with 1066 pieces available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

RG2012N-620-W-T5

SusumuIn Stock: 1174RG2012N-620-W-T5 Datasheet

Current PartRFQ

RG2012N-620-W-T1

SusumuIn Stock: 3352RG2012N-620-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-620-W-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 62 Ohms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height seated (max): 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Construction:

• Composition: Thin Film
• Features: Anti-Sulfur
• Automotive rating: AEC-Q200
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts must match all parameters listed above to ensure functional and mechanical compatibility in the target application.

Parameter Comparison

Engineering Selection Recommendations

The RG2012N-620-W-T1 is a direct equivalent substitute for the RG2012N-620-W-T5. Both parts are manufactured by Susumu, belong to the RG series, and share identical electrical, mechanical, and compliance specifications. The parts differ only in packaging reel designation (T5 versus T1) and current inventory levels.

Selection between these parts is based on the following criteria:

Product Status: Both parts maintain active production status, ensuring long-term availability and supply chain stability.

Compliance & Certifications: Both parts are AEC-Q200 qualified for automotive applications, ROHS3 compliant, and REACH unaffected. Anti-sulfur construction is present in both variants.

Electrical Performance: Identical resistance value, tolerance, power rating, temperature coefficient, and operating temperature range ensure functional interchangeability in circuit designs.

Mechanical Compatibility: Identical package format, physical dimensions, and termination configuration guarantee direct PCB footprint compatibility without design modification.

Inventory Considerations: The RG2012N-620-W-T1 offers higher stock availability (3318 pieces) compared to the RG2012N-620-W-T5 (1066 pieces), which may influence procurement decisions for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can the RG2012N-620-W-T1 be used as a direct replacement for the RG2012N-620-W-T5 without circuit redesign?

A: Yes. Both parts are electrically and mechanically identical. The RG2012N-620-W-T1 can be substituted directly without any circuit modifications, PCB layout changes, or performance impact.

Q: What is the difference between the T5 and T1 designations in the part numbers?

A: The T5 and T1 designations refer to different packaging reel specifications within the Tape & Reel (TR) format. Both parts are supplied in tape and reel packaging; the designation indicates the specific reel configuration. The electrical and mechanical specifications remain identical.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the RG2012N-620-W-T5 and RG2012N-620-W-T1 are AEC-Q200 qualified and feature anti-sulfur construction, meeting automotive industry standards for reliability and environmental resistance.

Q: What is the tolerance specification, and does it apply to both substitute parts?

A: Both parts have a tolerance of ±0.05%, which is a tight tolerance specification suitable for precision applications requiring high accuracy in resistance values.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across the temperature range of -55°C to 155°C, with a temperature coefficient of ±10ppm/°C, ensuring stable performance across wide environmental conditions.

Q: Can these 0805 package resistors be used in high-density PCB designs?

A: Yes. The 0805 (2012 Metric) package format with dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.020" (0.50mm) is suitable for standard surface-mount assembly processes and high-density board layouts.

Q: What is the moisture sensitivity level, and what does it mean?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, which indicates unlimited shelf life without special moisture control measures. These components do not require desiccant packaging or controlled storage conditions.