RG2012N-560-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-560-W-T5 is a 56 Ohm ±0.05% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part is currently active in production with 713 pieces available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

RG2012N-560-W-T5

SusumuIn Stock: 757RG2012N-560-W-T5 Datasheet

Current PartRFQ

RG2012N-560-W-T1

SusumuIn Stock: 2169RG2012N-560-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-560-W-T5 is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Resistance value: 56 Ohms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Maximum seated height: 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Construction:

• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must match all parameters listed above to ensure functional and mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012N-560-W-T5 and RG2012N-560-W-T1 are active production components manufactured by Susumu with identical electrical and mechanical specifications. The parts are fully interchangeable for circuit applications requiring a 56 Ohm ±0.05% thin film resistor in 0805 package format.

Compliance Status: Both parts carry AEC-Q200 automotive qualification, ROHS3 compliance, and unlimited moisture sensitivity rating (MSL 1). Both are suitable for applications operating across the -55°C to 155°C temperature range.

Inventory Consideration: The RG2012N-560-W-T1 maintains higher stock availability (2145 pieces) compared to the RG2012N-560-W-T5 (713 pieces), making it a viable alternative for high-volume procurement requirements.

Packaging: Both parts are supplied in Tape & Reel (TR) format, ensuring compatibility with automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Are RG2012N-560-W-T5 and RG2012N-560-W-T1 electrically identical?

A: Yes. Both parts have identical resistance (56 Ohms), tolerance (±0.05%), power rating (0.125W), temperature coefficient (±10ppm/°C), and operating temperature range (-55°C ~ 155°C).

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts share identical mechanical specifications including 0805 (2012 Metric) package format, physical dimensions (0.079" L x 0.049" W), and maximum seated height (0.020"). They are mechanically and functionally interchangeable.

Q: What is the difference between RG2012N-560-W-T5 and RG2012N-560-W-T1?

A: The parts are electrically and mechanically equivalent. The difference in part number designation (T5 versus T1) reflects packaging or supply chain variants. Both are active production parts from Susumu with identical specifications.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts carry AEC-Q200 automotive qualification and anti-sulfur construction, meeting automotive reliability standards.

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without special moisture control requirements.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What packaging format is used for these parts?

A: Both parts are supplied in Tape & Reel (TR) format, suitable for automated pick-and-place assembly equipment.