RG2012N-470-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-470-W-T5 is a 47 Ohm ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part is currently active in production with 717 pieces available in stock. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications for applications requiring this resistor value and tolerance class.

Substiute Parts

RG2012N-470-W-T5

SusumuIn Stock: 753RG2012N-470-W-T5 Datasheet

Current PartRFQ

RG2012N-470-W-T1

SusumuIn Stock: 2249RG2012N-470-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-470-W-T5 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part RG2012N-470-W-T1 maintains identical specifications in the following key areas:

• Resistance value: 47 Ohms
• Tolerance class: ±0.05%
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Thin film composition
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive AEC-Q200 qualification
• Anti-sulfur construction
• RoHS3 compliance
• Moisture Sensitivity Level 1

The only difference between these parts is the tape reel specification (T5 versus T1), which relates to packaging configuration and does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012N-470-W-T5 and RG2012N-470-W-T1 are active production parts from Susumu with full AEC-Q200 automotive qualification. Selection between these parts is determined by packaging and supply chain requirements rather than electrical performance.

The RG2012N-470-W-T5 is suitable for applications where the specific tape reel configuration designated as T5 is required by manufacturing or procurement specifications. The RG2012N-470-W-T1 provides an equivalent alternative with T1 tape reel configuration and higher current inventory availability (2161 pieces versus 717 pieces).

Both parts satisfy ROHS3 compliance, REACH unaffected status, and automotive temperature range requirements. The thin film construction with ±0.05% tolerance and ±10ppm/°C temperature coefficient ensures precision performance in automotive circuits requiring low-tolerance current-sensing or precision biasing applications.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-470-W-T1 be used as a direct replacement for RG2012N-470-W-T5 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The difference is limited to tape reel packaging configuration (T5 versus T1). Circuit performance, PCB footprint compatibility, and electrical characteristics are identical.

Q: What does the T5 and T1 designation indicate?

A: These designations refer to the tape reel specification used for component packaging and automated assembly. T5 and T1 represent different reel configurations but do not affect the component's electrical properties or physical dimensions.

Q: Are both parts suitable for automotive applications?

A: Yes. Both RG2012N-470-W-T5 and RG2012N-470-W-T1 carry AEC-Q200 automotive qualification and anti-sulfur construction, meeting automotive reliability and environmental requirements.

Q: What is the significance of the ±0.05% tolerance specification?

A: The ±0.05% tolerance indicates precision thin film resistor construction suitable for applications requiring tight resistance accuracy, such as precision current sensing, reference circuits, or high-accuracy analog signal conditioning in automotive systems.

Q: Can these parts be used interchangeably in pick-and-place assembly?

A: Yes, provided the assembly equipment is configured for the specific tape reel format (T5 or T1) being used. The physical component dimensions and 0805 package format are identical, ensuring PCB compatibility.

Q: What is the moisture sensitivity level, and why is it important?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture absorption limitations. These components do not require special moisture control during storage or handling, simplifying logistics and inventory management.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8533.21.0030).