RG2012N-332-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-332-W-T5 is a 3.3 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is manufactured by Susumu and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 1092 pieces currently in stock. Substitute parts are identified to address inventory availability, supply chain continuity, or equivalent performance requirements in applications where the primary part number is unavailable.

Substiute Parts

RG2012N-332-W-T5

SusumuIn Stock: 1145RG2012N-332-W-T5 Datasheet

Current PartRFQ

RG2012N-332-W-T1

SusumuIn Stock: 90321RG2012N-332-W-T1 Datasheet

DirectRFQ

ERA-6ARW332V

Panasonic Electronic ComponentsIn Stock: 3534ERA-6ARW332V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-332-W-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 3.3 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance & Certification:

• Automotive AEC-Q200 qualification
• ROHS3 compliance
• Thin film composition

All identified substitute parts maintain identical electrical specifications and package footprint compatibility. Variations in physical height or anti-sulfur coating do not affect functional substitution in standard circuit applications.

Parameter Comparison

Engineering Selection Recommendations

RG2012N-332-W-T1 (Susumu): This part is a direct equivalent to the RG2012N-332-W-T5 with identical electrical and mechanical specifications. Both parts are manufactured by Susumu within the RG series and maintain the same 0.020" maximum seated height. The RG2012N-332-W-T1 is available in significantly higher inventory (90,228 pieces) and is suitable for applications requiring the same performance characteristics and automotive qualification.

ERA-6ARW332V (Panasonic Electronic Components): This part provides electrical equivalence across all critical parameters including resistance, tolerance, power rating, temperature coefficient, and operating temperature range. The ERA-6ARW332V is AEC-Q200 qualified and ROHS3 compliant. The maximum seated height is 0.024" (0.60mm) compared to 0.020" (0.50mm) for the main part. This height difference may require verification for applications with strict PCB clearance constraints. The ERA-6ARW332V is available with 3,457 pieces in stock.

All substitute parts maintain full functional compatibility with the RG2012N-332-W-T5 in standard circuit applications where the specified electrical and thermal parameters are required.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-332-W-T1 be used as a direct replacement for RG2012N-332-W-T5?

A: Yes. Both parts are manufactured by Susumu with identical resistance (3.3 kOhms), tolerance (±0.05%), power rating (0.125W), package (0805), temperature coefficient (±10ppm/°C), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. The parts are electrically and mechanically interchangeable.

Q: What is the difference between RG2012N-332-W-T5 and RG2012N-332-W-T1?

A: The primary difference is the packaging designation suffix (T5 versus T1), which indicates different tape and reel configurations. The electrical specifications and component performance are identical. Both parts are active in production and available from Susumu.

Q: Can ERA-6ARW332V replace RG2012N-332-W-T5 in all applications?

A: ERA-6ARW332V is electrically equivalent with matching resistance, tolerance, power rating, temperature coefficient, and operating temperature range. The seated height is 0.024" (0.60mm) compared to 0.020" (0.50mm) for the RG2012N-332-W-T5. Applications with strict PCB clearance or height constraints require verification of the 0.004" (0.10mm) height difference.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. RG2012N-332-W-T1 and ERA-6ARW332V are both AEC-Q200 qualified, meeting automotive reliability standards equivalent to the main part.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. RG2012N-332-W-T5, RG2012N-332-W-T1, and ERA-6ARW332V all have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Are the substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant, matching the compliance status of the main part.

Q: What is the difference between Susumu and Panasonic versions?

A: Both manufacturers produce thin film 0805 chip resistors with identical electrical specifications. The primary differences are manufacturer identity, series designation (RG versus ERA-6A), and maximum seated height (0.020" versus 0.024"). Both are active products with AEC-Q200 qualification and ROHS3 compliance.