RG2012N-332-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-332-B-T5 is a 3.3 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package manufactured by Susumu. This surface-mount device is rated for 0.125W (1/8W) power dissipation and meets automotive AEC-Q200 qualification with anti-sulfur coating. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified to support component availability, design flexibility, and performance optimization across automotive and industrial applications requiring precision resistive elements.

Substiute Parts

RG2012N-332-B-T5

SusumuIn Stock: 862RG2012N-332-B-T5 Datasheet

Current PartRFQ

RG2012N-332-W-T1

SusumuIn Stock: 90321RG2012N-332-W-T1 Datasheet

UpgradeRFQ

ERA-6ARB332V

Panasonic Electronic ComponentsIn Stock: 6322ERA-6ARB332V Datasheet

DirectRFQ

ERA-6ARW332V

Panasonic Electronic ComponentsIn Stock: 3534ERA-6ARW332V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-332-B-T5 is determined by the following critical parameters: resistance value (3.3 kOhms), package type (0805 / 2012 Metric), power rating (0.125W), composition (thin film), temperature coefficient (±10ppm/°C), operating temperature range (-55°C ~ 155°C), and automotive qualification (AEC-Q200). Tolerance may vary between direct equivalents and upgrades. All substitute parts maintain identical resistance, package, power rating, composition, temperature coefficient, operating temperature range, and AEC-Q200 automotive qualification. Tolerance differences define upgrade versus direct equivalent classifications. Panasonic ERA-6A series parts and Susumu RG2012N series parts with matching specifications are qualified substitutes.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full compatibility with the RG2012N-332-B-T5 across critical electrical and mechanical parameters. Selection between direct equivalents and upgrades depends on application tolerance requirements.

Direct Equivalent: ERA-6ARB332V (Panasonic) provides identical ±0.1% tolerance specification and serves as a cross-manufacturer equivalent. This part is suitable for applications where the original ±0.1% tolerance meets design requirements.

Upgrade Options: RG2012N-332-W-T1 (Susumu) and ERA-6ARW332V (Panasonic) both offer improved ±0.05% tolerance specification. These upgrades provide tighter tolerance performance while maintaining all other electrical and mechanical characteristics. Upgrade parts are suitable for precision applications requiring enhanced tolerance control.

All parts carry active production status, AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating. Selection may be based on manufacturer preference, inventory availability, or tolerance performance requirements specific to the application.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARB332V replace RG2012N-332-B-T5 directly?

A: Yes. ERA-6ARB332V is a direct equivalent with identical resistance (3.3 kOhms), tolerance (±0.1%), power rating (0.125W), package (0805), composition (thin film), temperature coefficient (±10ppm/°C), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. The parts are mechanically and electrically interchangeable.

Q: What is the difference between direct equivalents and upgrade parts?

A: Direct equivalents maintain the same tolerance specification (±0.1%) as the main part. Upgrade parts (RG2012N-332-W-T1 and ERA-6ARW332V) provide tighter tolerance (±0.05%) while maintaining all other specifications. Upgrades are suitable for applications requiring enhanced precision.

Q: Are all substitute parts in the same package?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Physical board layout compatibility is maintained across all parts.

Q: Do substitute parts meet automotive qualification requirements?

A: Yes. All substitute parts carry AEC-Q200 automotive qualification, matching the main part specification. All parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level).

Q: Can I use an upgrade part (±0.05% tolerance) in place of the original (±0.1% tolerance)?

A: Yes. Upgrade parts with tighter tolerance (±0.05%) are functionally compatible with applications designed for ±0.1% tolerance. The upgrade provides enhanced precision performance.

Q: What is the temperature coefficient specification for all parts?

A: All parts, including the main part and all substitutes, have a temperature coefficient of ±10ppm/°C with an operating temperature range of -55°C ~ 155°C.