RG2012N-152-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-152-D-T5 is a 1.5 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This surface-mount device is rated for 0.125W (1/8W) power dissipation and is qualified to AEC-Q200 automotive standards with anti-sulfur coating. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified to address application requirements for higher tolerance grades, alternative manufacturer sourcing, or inventory availability while maintaining electrical and mechanical compatibility within the 0805 package footprint and automotive qualification framework.

Substiute Parts

RG2012N-152-D-T5

SusumuIn Stock: 1132RG2012N-152-D-T5 Datasheet

Current PartRFQ

RG2012N-152-W-T1

SusumuIn Stock: 1917RG2012N-152-W-T1 Datasheet

UpgradeRFQ

RG2012V-152-P-T1

SusumuIn Stock: 2030RG2012V-152-P-T1 Datasheet

UpgradeRFQ

ERA-6ARB152V

Panasonic Electronic ComponentsIn Stock: 5592ERA-6ARB152V Datasheet

UpgradeRFQ

ERA-6ARW152V

Panasonic Electronic ComponentsIn Stock: 4662ERA-6ARW152V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 1.5 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Power Rating: 0.125W (1/8W) (exact match required)
• Composition: Thin Film (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

Variable Parameters Allowing Substitution:

• Tolerance: Tighter tolerances (±0.05%, ±0.02%, ±0.1%) are acceptable substitutes for ±0.5%
• Temperature Coefficient: ±5ppm/°C or ±10ppm/°C are interchangeable
• Manufacturer: Susumu or Panasonic Electronic Components
• Height - Seated (Max): 0.020" (0.50mm) or 0.024" (0.60mm) within 0805 package specification

All identified substitute parts meet these criteria and are qualified for direct replacement in applications originally specified for RG2012N-152-D-T5.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production components with ROHS3 compliance and AEC-Q200 automotive qualification, ensuring compatibility with the original RG2012N-152-D-T5 specification.

Susumu RG Series Substitutes:

RG2012N-152-W-T1 provides tighter tolerance (±0.05%) while maintaining identical temperature coefficient and package dimensions. This part is suitable for applications requiring improved tolerance performance within the Susumu product line.

RG2012V-152-P-T1 offers the tightest tolerance specification (±0.02%) with reduced temperature coefficient (±5ppm/°C). This part is appropriate for precision circuit applications requiring enhanced stability and accuracy.

Panasonic ERA-6A Series Substitutes:

ERA-6ARB152V provides ±0.1% tolerance with standard temperature coefficient. This part enables cross-manufacturer sourcing while maintaining automotive qualification and thin film composition.

ERA-6ARW152V offers ±0.05% tolerance matching the Susumu RG2012N-152-W-T1 specification. This part provides alternative manufacturer availability with equivalent electrical performance.

All substitute parts maintain the 0805 package footprint, 0.125W power rating, and -55°C to 155°C operating temperature range. Height variation between Susumu (0.50mm maximum) and Panasonic (0.60mm maximum) parts remains within standard 0805 package tolerances and does not affect PCB assembly compatibility.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-152-P-T1 be used as a direct replacement for RG2012N-152-D-T5?

A: Yes. RG2012V-152-P-T1 is a direct substitute. It maintains identical resistance (1.5 kOhms), power rating (0.125W), package (0805), and automotive qualification (AEC-Q200). The tighter tolerance (±0.02% versus ±0.5%) and lower temperature coefficient (±5ppm/°C versus ±10ppm/°C) represent performance improvements compatible with the original application.

Q: What is the difference between Susumu and Panasonic substitute parts?

A: Both manufacturers provide thin film 0805 chip resistors with AEC-Q200 qualification and identical electrical specifications. Panasonic ERA-6A series parts have a maximum seated height of 0.024" (0.60mm) compared to Susumu RG series at 0.020" (0.50mm). Both heights are within 0805 package specification and do not affect PCB assembly. Selection between manufacturers is based on inventory availability and supply chain requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), matching the original RG2012N-152-D-T5 environmental and regulatory status.

Q: Can a part with ±0.1% tolerance replace one specified at ±0.5%?

A: Yes. ERA-6ARB152V with ±0.1% tolerance is a valid substitute for RG2012N-152-D-T5 specified at ±0.5%. Tighter tolerance specifications are acceptable replacements for looser tolerance requirements. The reverse substitution (using ±0.5% in place of ±0.1%) is not permitted.

Q: Does the temperature coefficient difference affect substitution eligibility?

A: Temperature coefficient differences (±5ppm/°C versus ±10ppm/°C) do not prevent substitution. Both specifications operate within the -55°C to 155°C range and maintain stable performance across the automotive operating environment. Selection is based on application-specific stability requirements.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging format, matching the original RG2012N-152-D-T5 packaging specification for automated assembly processes.