RG2012N-1332-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-1332-C-T5 is a 13.3 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values in compact form factors.

The RG2012N-1332-C-T5 is classified as obsolete. Equivalent and substitute parts are available from both Susumu and alternative manufacturers, offering improved tolerance specifications and active product status while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012N-1332-C-T5

SusumuIn Stock: 963RG2012N-1332-C-T5 Datasheet

Current PartRFQ

RG2012N-1332-B-T5

SusumuIn Stock: 1006RG2012N-1332-B-T5 Datasheet

UpgradeRFQ

RG2012N-1332-W-T1

SusumuIn Stock: 1184RG2012N-1332-W-T1 Datasheet

UpgradeRFQ

RG2012N-1332-W-T5

SusumuIn Stock: 1015RG2012N-1332-W-T5 Datasheet

UpgradeRFQ

TNPW080513K3BYEA

Vishay DaleIn Stock: 920TNPW080513K3BYEA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-1332-C-T5 is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Resistance value: 13.3 kOhms (exact match required)
• Tolerance: ±0.25% or better (tighter tolerance acceptable)
• Power rating: 0.125W minimum (higher ratings acceptable)
• Temperature coefficient: ±10ppm/°C (matching specification)

Mechanical Compatibility Requirements:

• Package: 0805 (2012 Metric) form factor (exact match required)
• Composition: Thin film construction
• Termination count: 2 terminations

Environmental & Compliance Requirements:

• Automotive AEC-Q200 qualification (required)
• Anti-sulfur construction (required)
• RoHS3 compliance (required)
• Moisture Sensitivity Level 1 (required)

Substitute parts must satisfy all electrical, mechanical, and compliance parameters. Tolerance improvements and higher power ratings are acceptable substitutions. Operating temperature range extensions are acceptable provided minimum range of -55°C ~ 155°C is maintained.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Susumu RG Series):

The RG2012N-1332-B-T5, RG2012N-1332-W-T5, and RG2012N-1332-W-T1 are direct substitutes from Susumu. All three parts maintain identical mechanical compatibility, electrical performance characteristics, and automotive qualification. The RG2012N-1332-B-T5 and RG2012N-1332-W-T5 offer improved tolerance specifications (±0.1% and ±0.05% respectively) compared to the original ±0.25%. The RG2012N-1332-W-T1 provides the tightest tolerance at ±0.05%. All three are active products with established supply availability.

Cross-Manufacturer Substitute (Vishay Dale):

The TNPW080513K3BYEA from Vishay Dale provides an alternative from a different manufacturer while maintaining all critical electrical and mechanical parameters. This part offers a higher power rating of 0.26W and an extended operating temperature range to 175°C. The tolerance specification of ±0.1% is tighter than the original part. This component is suitable for applications requiring higher thermal headroom or extended temperature operation within the automotive qualification framework.

Selection Criteria:

• For direct replacement with improved tolerance and active product status: RG2012N-1332-B-T5 or RG2012N-1332-W-T5
• For highest precision tolerance: RG2012N-1332-W-T1
• For cross-manufacturer sourcing with higher power capability: TNPW080513K3BYEA
• All substitutes maintain AEC-Q200 automotive qualification, anti-sulfur construction, and RoHS3 compliance

Frequently Asked Questions (FAQ)

Q: Can the RG2012N-1332-W-T5 directly replace the RG2012N-1332-C-T5?

A: Yes. The RG2012N-1332-W-T5 is a direct mechanical and electrical substitute. Both components use the 0805 (2012 Metric) package, maintain 13.3 kOhms resistance, feature thin film construction, and carry AEC-Q200 automotive qualification. The RG2012N-1332-W-T5 offers improved tolerance at ±0.05% compared to the original ±0.25%, making it a superior substitute.

Q: What is the difference between the Susumu RG series substitutes?

A: The three Susumu substitutes differ in tolerance specification: RG2012N-1332-B-T5 provides ±0.1% tolerance, while both RG2012N-1332-W-T5 and RG2012N-1332-W-T1 provide ±0.05% tolerance. All three maintain identical power ratings, package dimensions, and operating temperature ranges. Selection depends on the precision requirements of the application.

Q: Is the TNPW080513K3BYEA from Vishay Dale compatible with the original part?

A: Yes. The TNPW080513K3BYEA maintains mechanical compatibility through the 0805 package format and electrical compatibility through matching 13.3 kOhms resistance and ±10ppm/°C temperature coefficient. The part carries AEC-Q200 qualification and anti-sulfur construction. The higher power rating of 0.26W and extended temperature range to 175°C provide additional design margin.

Q: Can I use a substitute with tighter tolerance than the original specification?

A: Yes. A substitute with tighter tolerance (lower percentage value) is fully compatible and provides improved performance. The RG2012N-1332-W-T1 and RG2012N-1332-W-T5 with ±0.05% tolerance are acceptable replacements for the original ±0.25% specification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant with Moisture Sensitivity Level 1 rating, matching the environmental compliance profile of the original RG2012N-1332-C-T5.

Q: What is the significance of the product status change from Obsolete to Active?

A: The substitute parts are classified as active products, indicating current manufacturing and established supply chain availability. This ensures long-term sourcing reliability and eliminates the supply constraints associated with obsolete components.

Q: Do the substitute parts maintain the same physical dimensions?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Maximum seated height specifications are equivalent or compatible for PCB assembly.