RG2012N-132-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012N-132-W-T1 is a 1.3 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently active in production with 1151 pieces available in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to supply constraints, design flexibility, or inventory availability.

Substiute Parts

RG2012N-132-W-T1

SusumuIn Stock: 1234RG2012N-132-W-T1 Datasheet

Current PartRFQ

ERA-6ARW132V

Panasonic Electronic ComponentsIn Stock: 6935ERA-6ARW132V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-132-W-T1 is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Resistance value: 1.3 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance & Quality:

• Composition: Thin Film
• Automotive qualification: AEC-Q200
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The ERA-6ARW132V from Panasonic Electronic Components meets all electrical and mechanical requirements for direct substitution. Both parts share identical resistance, tolerance, power rating, temperature coefficient, operating temperature range, package type, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The ERA-6ARW132V from Panasonic Electronic Components is a direct electrical and mechanical equivalent to the RG2012N-132-W-T1. Both components are active products with ROHS3 compliance and AEC-Q200 automotive qualification. The ERA-6ARW132V maintains identical electrical performance across all specified parameters including resistance, tolerance, power rating, and temperature coefficient. The maximum seated height difference of 0.004" (0.10mm) between the two parts remains within standard PCB assembly tolerances for 0805 package components. Both parts are classified as Moisture Sensitivity Level 1, indicating unlimited shelf life under standard storage conditions. Selection between these parts is based on availability, supply chain requirements, and design flexibility rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6ARW132V replace the RG2012N-132-W-T1 in automotive applications?

A: Yes. Both components carry AEC-Q200 automotive qualification and are ROHS3 compliant. All electrical specifications including resistance, tolerance, temperature coefficient, and operating temperature range are identical.

Q: Are there any dimensional differences that affect PCB assembly?

A: The maximum seated height differs by 0.004" (0.10mm), with the ERA-6ARW132V at 0.024" (0.60mm) compared to the RG2012N-132-W-T1 at 0.020" (0.50mm). This difference is within standard PCB assembly tolerances for 0805 package components and does not affect placement or soldering processes.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the RG2012N-132-W-T1 and ERA-6ARW132V are classified as Moisture Sensitivity Level 1 (Unlimited), indicating no moisture-related shelf life restrictions under standard storage conditions.

Q: What is the key difference between these two parts?

A: The primary difference is the manufacturer. The RG2012N-132-W-T1 is manufactured by Susumu, while the ERA-6ARW132V is manufactured by Panasonic Electronic Components. All electrical and mechanical specifications are equivalent.

Q: Are both parts suitable for high-precision applications?

A: Yes. Both components feature ±0.05% tolerance and ±10ppm/°C temperature coefficient, making them suitable for precision analog circuits and measurement applications.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The identical package format (0805), electrical specifications, and compliance certifications allow direct substitution without design modifications.