RG2012N-1271-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012N-1271-B-T1 is a 1.27 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in harsh environments. The part is currently obsolete, necessitating identification of functionally equivalent alternatives from active product lines. Substitute parts maintain the same resistance value, package format, and core electrical specifications while offering improved availability and enhanced performance characteristics.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance	1.27 kOhms	Must match exactly for direct substitution
Tolerance	±0.1%	Determines precision class; tighter tolerances are compatible upgrades
Power Rating	0.125W (1/8W)	Minimum power dissipation requirement; higher ratings are acceptable
Package / Case	0805 (2012 Metric)	Must match for PCB footprint compatibility
Composition	Thin Film	Determines stability and temperature coefficient characteristics
Temperature Coefficient	±10ppm/°C	Affects frequency stability; lower values indicate better performance
Operating Temperature Range	-55°C ~ 155°C	Minimum operating range requirement; extended ranges are acceptable
Automotive Rating	AEC-Q200	Required for automotive applications; must be maintained
RoHS Status	ROHS3 Compliant	Environmental compliance requirement

Substitute Part Grouping Explanation

Substitute parts are classified into two categories based on electrical parameter compatibility:

Direct Substitutes maintain identical electrical specifications (1.27 kOhms, ±0.1% tolerance, 0.125W power rating) with differences limited to packaging format (Tape & Reel versus bulk) or minor manufacturing variations. These parts are interchangeable without circuit redesign.

Upgrade Substitutes offer enhanced performance through improved tolerance (±0.05% or ±0.02%), lower temperature coefficient (±5ppm/°C), or higher power ratings (0.26W). These parts exceed the original specifications and are compatible for applications requiring tighter precision or improved thermal performance.

Cross-Manufacturer Alternatives from different manufacturers (Vishay Dale, Panasonic) provide equivalent electrical performance with identical package and rating specifications, ensuring functional compatibility while expanding sourcing options.

Substitution eligibility is determined by the following criteria:

Resistance value: 1.27 kOhms (exact match required)
Package format: 0805 (2012 Metric) (exact match required)
Automotive rating: AEC-Q200 (required for automotive applications)
Tolerance: ±0.1% or better (equal or tighter acceptable)
Power rating: 0.125W minimum (equal or higher acceptable)
Temperature coefficient: ±10ppm/°C or better (lower values acceptable)
Operating temperature: -55°C to 155°C minimum (extended ranges acceptable)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op. Temp Range	Status	Packaging
RG2012N-1271-B-T1	Susumu	1.27 kΩ	±0.1%	0.125	±10	-55 to 155°C	Obsolete	Bulk
RG2012N-1271-B-T5	Susumu	1.27 kΩ	±0.1%	0.125	±10	-55 to 155°C	Active	Tape & Reel
RG2012N-1271-W-T1	Susumu	1.27 kΩ	±0.05%	0.125	±10	-55 to 155°C	Active	Tape & Reel
RG2012N-1271-W-T5	Susumu	1.27 kΩ	±0.05%	0.125	±10	-55 to 155°C	Active	Tape & Reel
RG2012V-1271-B-T5	Susumu	1.27 kΩ	±0.1%	0.125	±5	-55 to 155°C	Active	Tape & Reel
RG2012V-1271-P-T1	Susumu	1.27 kΩ	±0.02%	0.125	±5	-55 to 155°C	Active	Tape & Reel
RG2012V-1271-W-T1	Susumu	1.27 kΩ	±0.05%	0.125	±5	-55 to 155°C	Active	Tape & Reel
RG2012V-1271-W-T5	Susumu	1.27 kΩ	±0.05%	0.125	±5	-55 to 155°C	Active	Tape & Reel
TNPW08051K27BYEA	Vishay Dale	1.27 kΩ	±0.1%	0.26	±10	-55 to 175°C	Active	Tape & Reel
ERA-6AEB1271V	Panasonic	1.27 kΩ	±0.1%	0.125	±25	-55 to 155°C	Active	Tape & Reel

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): RG2012N-1271-B-T5 is the primary direct substitute, offering identical electrical and thermal characteristics to the obsolete RG2012N-1271-B-T1. The only difference is packaging format (Tape & Reel versus bulk), which does not affect circuit performance. This part maintains active product status and full AEC-Q200 automotive compliance.

For Precision-Critical Applications: RG2012V-1271-P-T1 provides the tightest tolerance specification (±0.02%) with improved temperature coefficient (±5ppm/°C), suitable for precision analog circuits, reference networks, or measurement instrumentation. RG2012V-1271-W-T1 and RG2012V-1271-W-T5 offer intermediate precision (±0.05%) with the same improved temperature coefficient.

For Thermal Performance Enhancement: TNPW08051K27BYEA from Vishay Dale provides higher power dissipation capability (0.26W versus 0.125W) and extended operating temperature range (-55°C to 175°C), suitable for applications with elevated ambient temperatures or higher power density requirements. This part maintains ±0.1% tolerance and AEC-Q200 rating.

For Cross-Manufacturer Sourcing: ERA-6AEB1271V from Panasonic Electronic Components provides equivalent electrical specifications with high inventory availability. Note that the temperature coefficient is ±25ppm/°C, which is less stable than the Susumu alternatives. This part is suitable for general-purpose applications where precision is not critical.

All substitute parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and 0805 package compatibility. Selection should be based on specific circuit requirements for tolerance, temperature stability, and thermal performance.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-1271-B-T5 be used as a direct replacement for RG2012N-1271-B-T1? A: Yes. RG2012N-1271-B-T5 is electrically and functionally identical to the obsolete RG2012N-1271-B-T1. The only difference is packaging format (Tape & Reel versus bulk), which does not affect circuit performance or PCB assembly compatibility.

Q: What is the difference between RG2012N and RG2012V series parts? A: The RG2012V series offers improved temperature coefficient (±5ppm/°C versus ±10ppm/°C), providing better frequency stability and lower drift over temperature. The "V" designation indicates enhanced performance characteristics. Both series maintain identical resistance, tolerance options, and package format.

Q: Are the RG2012V-1271-W variants (±0.05% tolerance) compatible with circuits designed for ±0.1% tolerance? A: Yes. Tighter tolerance specifications are compatible upgrades. A ±0.05% part will perform within the ±0.1% specification window, providing improved accuracy without circuit modification.

Q: Why does TNPW08051K27BYEA have a higher power rating (0.26W) than the original part (0.125W)? A: Higher power ratings indicate greater thermal dissipation capability. This part is suitable for applications requiring higher power handling or operating in elevated temperature environments. The higher rating does not negatively affect circuits designed for 0.125W operation.

Q: Is ERA-6AEB1271V from Panasonic suitable for precision applications? A: ERA-6AEB1271V maintains ±0.1% tolerance matching the original specification. However, the temperature coefficient is ±25ppm/°C, which is higher than Susumu alternatives (±10ppm/°C or ±5ppm/°C). This part is suitable for general-purpose applications but not recommended for precision analog circuits requiring tight temperature stability.

Q: Do all substitute parts maintain automotive AEC-Q200 qualification? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, ensuring compliance with automotive reliability and quality standards. This qualification is maintained across all Susumu, Vishay Dale, and Panasonic alternatives.

Q: Can I mix different substitute parts in the same circuit board assembly? A: Yes. All substitute parts are electrically compatible and maintain identical 0805 package footprints. However, for consistency in production and quality control, using a single part number across a design is recommended.

Q: What is the significance of the "T1" and "T5" designations in Susumu part numbers? A: These designations indicate packaging tape specifications. "T1" and "T5" refer to different tape formats used in automated assembly equipment. Both formats contain identical components; selection depends on assembly equipment compatibility. Electrically and functionally, T1 and T5 variants are interchangeable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message