RG2012N-113-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012N-113-W-T1 is an 11 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 714 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

RG2012N-113-W-T1

SusumuIn Stock: 752RG2012N-113-W-T1 Datasheet

Current PartRFQ

ERA-6ARW113V

Panasonic Electronic ComponentsIn Stock: 5743ERA-6ARW113V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG2012N-113-W-T1 are identified based on strict equivalence across the following critical parameters:

• Resistance Value: 11 kOhms
• Tolerance: ±0.05%
• Power Rating: 0.125W (1/8W)
• Package Format: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±10ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Qualification: AEC-Q200
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected

The ERA-6ARW113V manufactured by Panasonic Electronic Components meets all specified electrical and mechanical parameters, enabling direct substitution in applications requiring identical performance characteristics and automotive-grade reliability.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012N-113-W-T1 and ERA-6ARW113V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is determined by availability and supply chain requirements rather than electrical or mechanical performance differences. The RG2012N-113-W-T1 features anti-sulfur coating, while the ERA-6ARW113V does not specify this feature in the provided documentation. For applications in environments with sulfur exposure risk, the RG2012N-113-W-T1 is the specified choice. For general automotive and industrial applications meeting AEC-Q200 standards, either part satisfies the electrical and mechanical requirements. The ERA-6ARW113V offers higher inventory availability (5655 units) compared to the RG2012N-113-W-T1 (714 units), supporting procurement flexibility.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6ARW113V be used as a direct replacement for the RG2012N-113-W-T1?

A: Yes. Both parts share identical electrical specifications (11 kOhms ±0.05%, 0.125W, ±10ppm/°C), mechanical package format (0805), and automotive qualification (AEC-Q200). Physical dimensions are equivalent within manufacturing tolerances. Direct substitution is supported for applications not requiring anti-sulfur coating.

Q: What is the difference in physical dimensions between these parts?

A: Both parts conform to 0805 (2012 Metric) package specifications with length 0.079" (2.00mm) and width 0.049" (1.25mm). The seated height differs slightly: RG2012N-113-W-T1 maximum 0.020" (0.50mm) versus ERA-6ARW113V maximum 0.024" (0.60mm). This variation remains within standard 0805 package tolerances and does not affect PCB assembly compatibility.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the RG2012N-113-W-T1 and ERA-6ARW113V carry AEC-Q200 automotive qualification and operate across the -55°C to 155°C temperature range required for automotive environments.

Q: What is the significance of the anti-sulfur feature on the RG2012N-113-W-T1?

A: The anti-sulfur coating on the RG2012N-113-W-T1 provides protection against sulfur-containing atmospheric contaminants that can degrade component performance in specific industrial environments. The ERA-6ARW113V does not specify this feature. Selection depends on environmental exposure requirements.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the RG2012N-113-W-T1 and ERA-6ARW113V are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What is the moisture sensitivity level for these parts?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply without special desiccant or humidity control requirements.