RG2012N-1132-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-1132-C-T5 is a 11.3 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part is currently classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility while offering improved specifications or continued availability.

Substiute Parts

RG2012N-1132-C-T5

SusumuIn Stock: 1076RG2012N-1132-C-T5 Datasheet

Current PartRFQ

RG2012N-1132-B-T5

SusumuIn Stock: 1011RG2012N-1132-B-T5 Datasheet

UpgradeRFQ

RG2012N-1132-W-T1

SusumuIn Stock: 922RG2012N-1132-W-T1 Datasheet

UpgradeRFQ

RG2012N-1132-W-T5

SusumuIn Stock: 1195RG2012N-1132-W-T5 Datasheet

UpgradeRFQ

TNPW080511K3BYEA

Vishay DaleIn Stock: 1147TNPW080511K3BYEA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-1132-C-T5 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Resistance value: 11.3 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (physical and electrical footprint compatibility)
• Composition: Thin Film (electrical performance characteristics)
• Features: Anti-Sulfur, Automotive AEC-Q200 (environmental and reliability requirements)
• Temperature Coefficient: ±10ppm/°C (thermal stability)
• Moisture Sensitivity Level: 1 (Unlimited) (handling and storage compatibility)

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter (lower numerical value) than ±0.25%
• Power Rating: May be equal to or greater than 0.125W
• Operating Temperature Range: May be equal to or extended beyond -55°C ~ 155°C
• Product Status: Active substitutes are preferred over obsolete status

All substitute parts listed maintain identical mechanical dimensions, termination count (2), and regulatory compliance (ROHS3, REACH Unaffected, EAR99).

Parameter Comparison

Engineering Selection Recommendations

Susumu RG2012N-1132-B-T5 (±0.1% Tolerance)

This part provides improved tolerance specification (±0.1% versus ±0.25%) while maintaining all other electrical and mechanical parameters. Active product status ensures continued availability. Suitable for applications requiring tighter resistance tolerance than the original specification.

Susumu RG2012N-1132-W-T1 and RG2012N-1132-W-T5 (±0.05% Tolerance)

Both parts offer the highest tolerance specification (±0.05%) available in this series. Identical electrical performance and mechanical compatibility. The W-T1 and W-T5 designations indicate different tape reel configurations. Active product status supports long-term supply chain continuity. Appropriate for precision circuit applications where tighter tolerance control is required.

Vishay Dale TNPW080511K3BYEA (Cross-Manufacturer Alternative)

This part represents a cross-manufacturer substitute from Vishay Dale's TNPW e3 series. Maintains 11.3 kOhms resistance, ±0.1% tolerance, and AEC-Q200 automotive qualification. Offers increased power rating (0.26W versus 0.125W) and extended operating temperature range (-55°C ~ 175°C versus -55°C ~ 155°C). Height specification increases to 0.022" (0.55mm) maximum. Active product status and additional moisture-resistant feature provide enhanced environmental protection. Suitable for applications requiring higher power dissipation capability or extended temperature operation.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical footprint compatibility with the original RG2012N-1132-C-T5 component.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-1132-B-T5 be used as a direct replacement for RG2012N-1132-C-T5?

A: Yes. Both parts share identical resistance (11.3 kOhms), package (0805), power rating (0.125W), composition (thin film), and automotive AEC-Q200 qualification. The RG2012N-1132-B-T5 provides tighter tolerance (±0.1% versus ±0.25%), which is a compatible upgrade. Mechanical dimensions and electrical performance are equivalent.

Q: What is the difference between RG2012N-1132-W-T1 and RG2012N-1132-W-T5?

A: Both parts are electrically identical with 11.3 kOhms resistance and ±0.05% tolerance. The T1 and T5 designations refer to different tape reel packaging configurations. Selection depends on procurement and assembly equipment compatibility. Electrical performance and mechanical fit are identical.

Q: Why does TNPW080511K3BYEA have a higher power rating (0.26W) than the original part (0.125W)?

A: The TNPW080511K3BYEA is a higher-performance variant from Vishay Dale's TNPW e3 series. The increased power rating (0.26W) provides additional thermal margin and allows operation in higher power dissipation applications. This is a compatible upgrade that does not compromise circuit performance. The 0805 package footprint remains identical.

Q: Is the height difference between RG2012N-1132-C-T5 (0.020" max) and TNPW080511K3BYEA (0.022" max) significant?

A: The height difference is 0.002" (0.05mm), which falls within typical PCB assembly tolerances. This minor variation does not affect standard 0805 package compatibility or automated assembly processes. Verify clearance in applications with height-constrained layouts.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, matching the original RG2012N-1132-C-T5 specification. This ensures compliance with automotive reliability and environmental stress testing requirements.

Q: Can I use a substitute part with tighter tolerance (±0.05%) in place of the original ±0.25% specification?

A: Yes. Tighter tolerance specifications are compatible substitutes. A ±0.05% part will meet any circuit requirement specified for ±0.25% tolerance. No circuit redesign or re-qualification is required when upgrading to tighter tolerance.

Q: What is the significance of the "Anti-Sulfur" feature?

A: Anti-sulfur construction protects the resistor from corrosion caused by hydrogen sulfide exposure in industrial and automotive environments. All listed parts include this feature, ensuring equivalent environmental protection and long-term reliability.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, matching the regulatory status of the original RG2012N-1132-C-T5 component.