RG2012N-111-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012N-111-W-T5 is a 110 Ohms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and stable performance across extended temperature ranges. The part is supplied in Tape & Reel packaging and maintains Active product status with 842 pieces currently in stock. Substitute parts are identified to address inventory availability, lead time requirements, or packaging format preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

RG2012N-111-W-T5

SusumuIn Stock: 903RG2012N-111-W-T5 Datasheet

Current PartRFQ

RG2012N-111-W-T1

SusumuIn Stock: 1787RG2012N-111-W-T1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-111-W-T5 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RG2012N-111-W-T1 qualifies as a direct equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Resistance value: 110 Ohms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Maximum seated height: 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Features (Must Match Exactly):

• Composition: Thin Film
• Anti-sulfur coating: Present
• Automotive AEC-Q200 rating: Present
• RoHS3 compliance: Present
• Moisture sensitivity level: 1 (Unlimited)

The only difference between the main part and substitute is the tape reel specification (T5 versus T1), which represents a packaging format variation within the same Tape & Reel category and does not affect electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012N-111-W-T5 and RG2012N-111-W-T1 are Active status products manufactured by Susumu with identical electrical specifications, mechanical dimensions, and compliance certifications. Selection between these parts is based on the following factors:

Inventory Availability: The RG2012N-111-W-T1 maintains higher stock levels (1711 pieces) compared to the RG2012N-111-W-T5 (842 pieces), making it suitable for applications with extended lead time requirements or high-volume procurement needs.

Packaging Specification: Both parts are supplied in Tape & Reel format. The T5 and T1 designations indicate different reel specifications within the Tape & Reel category. Verify reel compatibility with your assembly equipment before final selection.

Compliance & Certification: Both parts maintain identical AEC-Q200 automotive qualification, ROHS3 compliance, and REACH unaffected status, ensuring suitability for regulated applications without modification to design or procurement documentation.

Electrical Performance: No performance differentiation exists between the two parts. Both deliver 110 Ohms ±0.05% resistance with ±10ppm/°C temperature coefficient across the -55°C to 155°C operating range.

Frequently Asked Questions (FAQ)

Q: Can RG2012N-111-W-T1 be used as a direct replacement for RG2012N-111-W-T5?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the tape reel specification (T1 versus T5). Confirm that your assembly equipment is compatible with the T1 reel format before implementation.

Q: What does the T5 and T1 designation mean?

A: These designations specify the reel configuration for Tape & Reel packaging. T5 and T1 represent different reel sizes and specifications. Consult your equipment documentation or supplier specifications to confirm compatibility with your production line.

Q: Are both parts suitable for automotive applications?

A: Yes. Both RG2012N-111-W-T5 and RG2012N-111-W-T1 carry AEC-Q200 automotive qualification and anti-sulfur coating, meeting automotive reliability and environmental requirements.

Q: What is the tolerance difference between these parts?

A: There is no tolerance difference. Both parts maintain ±0.05% tolerance on the 110 Ohm resistance value.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts share identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: Can I mix RG2012N-111-W-T5 and RG2012N-111-W-T1 in the same production batch?

A: Yes, from an electrical and mechanical standpoint. However, verify that your assembly equipment can process both reel formats without changeover or adjustment. Consult your equipment specifications and production procedures.

Q: What is the temperature coefficient specification and why does it matter?

A: Both parts have a temperature coefficient of ±10ppm/°C, meaning the resistance value changes by a maximum of 10 parts per million for each degree Celsius change in operating temperature. This specification is critical for precision applications requiring stable resistance across the -55°C to 155°C operating range.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for electronic component manufacturing and use.