RG2012N-1070-P-T1 Equivalent & Substitute Parts

Part Overview

The RG2012N-1070-P-T1 is a 107 Ohms ±0.02% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is currently classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and supply chain reliability.

Substiute Parts

RG2012N-1070-P-T1

SusumuIn Stock: 762RG2012N-1070-P-T1 Datasheet

Current PartRFQ

RG2012V-1070-P-T1

SusumuIn Stock: 1072RG2012V-1070-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012N-1070-P-T1 is determined by the following critical parameters:

Electrical Parameters:

• Resistance value: 107 Ohms (exact match required)
• Tolerance: ±0.02% (exact match required)
• Power rating: 0.125W minimum (equal or higher acceptable)
• Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)

Mechanical Parameters:

• Package format: 0805 (2012 Metric) (exact match required)
• Number of terminations: 2 (exact match required)
• Physical dimensions: 0.079" L x 0.049" W, 0.020" max height (exact match required)

Compliance & Quality Parameters:

• Composition: Thin Film (exact match required)
• AEC-Q200 automotive rating (required for automotive applications)
• RoHS3 compliance (required)
• Moisture Sensitivity Level 1 (required)

The RG2012V-1070-P-T1 meets all substitution criteria as an active product with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The RG2012V-1070-P-T1 is the direct equivalent and recommended substitute for the obsolete RG2012N-1070-P-T1. Selection rationale is based on the following factors:

Product Status: The RG2012V-1070-P-T1 maintains active product status, ensuring continued availability and manufacturing support. The RG2012N-1070-P-T1 is classified as obsolete, creating supply chain risk.

Electrical Equivalence: Both components share identical resistance (107 Ohms), tolerance (±0.02%), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). The substitute exhibits superior temperature coefficient performance (±5ppm/°C versus ±10ppm/°C), providing enhanced stability across thermal cycles.

Mechanical Compatibility: Both parts are packaged in 0805 (2012 Metric) format with identical physical dimensions (0.079" L x 0.049" W, 0.020" max height) and two terminations. Direct footprint compatibility is confirmed.

Compliance & Quality: Both components meet AEC-Q200 automotive qualification, ROHS3 compliance, and Moisture Sensitivity Level 1 requirements. Anti-sulfur coating is present on both variants.

Packaging Consideration: The substitute is supplied in Tape & Reel (TR) format, which is standard for production environments and provides improved handling and automated assembly compatibility compared to alternative packaging methods.

Frequently Asked Questions (FAQ)

Q: Can the RG2012V-1070-P-T1 be used as a direct replacement for the RG2012N-1070-P-T1 in existing designs?

A: Yes. Both components share identical electrical specifications (107 Ohms ±0.02%, 0.125W), mechanical dimensions (0805 package), and compliance certifications (AEC-Q200, ROHS3). Direct substitution is supported without design modification.

Q: What is the difference between the RG2012N and RG2012V variants?

A: The primary differences are product status and temperature coefficient. The RG2012N-1070-P-T1 is obsolete with ±10ppm/°C temperature coefficient. The RG2012V-1070-P-T1 is active with superior ±5ppm/°C temperature coefficient, providing better thermal stability.

Q: Are there any packaging differences between these parts?

A: The RG2012N-1070-P-T1 packaging format is not specified in available documentation. The RG2012V-1070-P-T1 is supplied in Tape & Reel (TR) format, which is standard for automated assembly and production environments.

Q: Does the substitute meet automotive qualification requirements?

A: Yes. The RG2012V-1070-P-T1 carries AEC-Q200 automotive qualification identical to the main part, with anti-sulfur coating and operating temperature range of -55°C ~ 155°C.

Q: Is the substitute RoHS compliant?

A: Yes. The RG2012V-1070-P-T1 is ROHS3 compliant and REACH unaffected, matching the compliance profile of the main part.

Q: What is the moisture sensitivity level for the substitute?

A: Both components are rated Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Can the substitute be used in high-precision applications requiring tight tolerance?

A: Yes. Both components maintain ±0.02% tolerance specification. The substitute offers enhanced performance with ±5ppm/°C temperature coefficient, providing superior stability in precision measurement and control circuits.