RG1005P-9530-B-T5 Equivalent & Substitute Parts

Part Overview

The RG1005P-9530-B-T5 is a 953 Ohms ±0.1% thin film chip resistor manufactured by Susumu in 0402 (1005 Metric) package format. This surface mount device is rated for 0.063W (1/16W) power dissipation and is qualified to AEC-Q200 automotive standards with anti-sulfur coating. The part is active in production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified when alternative manufacturers offer components meeting the same electrical specifications, package dimensions, and operational requirements, enabling design flexibility and supply chain continuity.

Substiute Parts

RG1005P-9530-B-T5

SusumuIn Stock: 1200RG1005P-9530-B-T5 Datasheet

Current PartRFQ

CPF0402B953RE1

TE Connectivity Passive ProductIn Stock: 3261CPF0402B953RE1 Datasheet

DirectRFQ

ERA-2AEB9530X

Panasonic Electronic ComponentsIn Stock: 20297ERA-2AEB9530X Datasheet

DirectRFQ

RT0402BRD07953RL

YAGEOIn Stock: 25172RT0402BRD07953RL Datasheet

DirectRFQ

TNPW0402953RBEED

Vishay DaleIn Stock: 8995TNPW0402953RBEED Datasheet

DirectRFQ

RN73C1E953RBTDF

TE Connectivity Passive ProductIn Stock: 1141RN73C1E953RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG1005P-9530-B-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 953 Ohms
• Tolerance: ±0.1%
• Package / Case: 0402 (1005 Metric)
• Composition: Thin Film
• Number of Terminations: 2
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Power Rating: 0.063W minimum (higher ratings acceptable)
• Temperature Coefficient: ±25ppm/°C or better (lower values acceptable)
• Operating Temperature Range: -55°C minimum to 155°C minimum (extended ranges acceptable)
• Height - Seated: 0.016" (0.40mm) maximum (lower heights acceptable)
• Automotive AEC-Q200 qualification: Present on main part; optional on substitutes

Substitute parts are classified as direct equivalents when all mandatory parameters match and allowable variations remain within specified tolerances. Parts with enhanced specifications (lower temperature coefficient, higher power rating, extended temperature range) are classified as upgrades.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Substitutes:

CPF0402B953RE1 (TE Connectivity Passive Product), RT0402BRD07953RL (YAGEO), and ERA-2AEB9530X (Panasonic Electronic Components) are direct functional equivalents to the RG1005P-9530-B-T5. All three parts match the mandatory electrical and mechanical parameters: 953 Ohms ±0.1% resistance, 0.063W power rating, 0402 package, thin film composition, ±25ppm/°C temperature coefficient, -55°C to 155°C operating range, and RoHS3 compliance with MSL 1 rating.

ERA-2AEB9530X maintains automotive AEC-Q200 qualification identical to the main part, along with anti-sulfur coating. CPF0402B953RE1 and RT0402BRD07953RL do not carry AEC-Q200 certification but are suitable for non-automotive applications or where automotive qualification is not required.

Enhanced Specification Substitute:

TNPW0402953RBEED (Vishay Dale) is classified as an upgrade substitute. This part exceeds the main part specifications with 0.13W power rating (versus 0.063W), extended operating temperature range to 175°C (versus 155°C), and includes anti-sulfur and moisture-resistant features with AEC-Q200 qualification. The temperature coefficient remains ±25ppm/°C. This part is suitable for applications requiring higher power dissipation or extended thermal operating range.

Premium Upgrade Substitute:

RN73C1E953RBTDF (TE Connectivity Passive Product, Holsworthy series) offers superior temperature stability with ±10ppm/°C temperature coefficient compared to the ±25ppm/°C of the main part. All other electrical and mechanical parameters match the main part specification. This upgrade is applicable to precision measurement or high-stability circuit applications.

Selection Criteria:

• For direct replacement in automotive applications: ERA-2AEB9530X
• For direct replacement in general industrial applications: CPF0402B953RE1 or RT0402BRD07953RL
• For applications requiring higher power dissipation or extended temperature range: TNPW0402953RBEED
• For precision applications requiring superior temperature stability: RN73C1E953RBTDF

All substitute parts are active in production status with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can CPF0402B953RE1 be used as a direct replacement for RG1005P-9530-B-T5 in automotive applications?

A: CPF0402B953RE1 matches all electrical and mechanical specifications but does not carry AEC-Q200 automotive qualification. Use in automotive applications only if AEC-Q200 certification is not a design requirement. For automotive applications requiring AEC-Q200 compliance, use ERA-2AEB9530X.

Q: What is the difference between the main part and RN73C1E953RBTDF?

A: RN73C1E953RBTDF has a superior temperature coefficient of ±10ppm/°C compared to the main part's ±25ppm/°C. All other parameters are identical. This upgrade is beneficial for precision circuits where temperature stability is critical.

Q: Is TNPW0402953RBEED compatible with the same PCB layout as RG1005P-9530-B-T5?

A: Yes. TNPW0402953RBEED has identical package dimensions (0.039" L x 0.020" W) and footprint. The seated height is 0.016" (0.40mm), matching the main part. PCB layout compatibility is confirmed.

Q: Can TNPW0402953RBEED be used in place of RG1005P-9530-B-T5 in a circuit designed for 0.063W power dissipation?

A: Yes. TNPW0402953RBEED is rated for 0.13W, which exceeds the 0.063W requirement. Higher power rating does not create compatibility issues; the part will operate safely at lower power levels.

Q: What is the significance of the height difference between parts (0.016" versus 0.014")?

A: The height difference of 0.002" (0.05mm) is within typical PCB assembly tolerances. Parts with lower seated height (0.014") provide additional clearance for low-profile applications. Both heights are compatible with standard 0402 package footprints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 compliance certification, matching the main part's environmental compliance status.

Q: Which substitute part has the widest operating temperature range?

A: TNPW0402953RBEED operates from -55°C to 175°C, providing 20°C additional upper temperature range compared to the main part's -55°C to 155°C specification.

Q: Can RT0402BRD07953RL be used in high-reliability applications?

A: RT0402BRD07953RL is active in production status with RoHS3 compliance and MSL 1 rating. It is suitable for high-reliability applications where AEC-Q200 automotive qualification is not required. For automotive high-reliability applications, use ERA-2AEB9530X.