RG1005P-913-W-T1 Equivalent & Substitute Parts

Part Overview

The RG1005P-913-W-T1 is a 91 kOhms ±0.05% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-precision applications requiring tight tolerance specifications. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing production and procurement requirements.

Substiute Parts

RG1005P-913-W-T1

SusumuIn Stock: 919RG1005P-913-W-T1 Datasheet

Current PartRFQ

RG1005P-913-W-T5

SusumuIn Stock: 929RG1005P-913-W-T5 Datasheet

DirectRFQ

RG1005N-913-W-T1

SusumuIn Stock: 747RG1005N-913-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG1005P-913-W-T1 is determined by the following critical parameters:

Electrical Parameters:

• Resistance value: 91 kOhms (exact match required)
• Tolerance: ±0.05% (exact match required)
• Power rating: 0.063W / 1/16W (exact match required)
• Temperature coefficient: ±25ppm/°C or better (lower values acceptable)

Mechanical Parameters:

• Package type: 0402 (1005 Metric) (exact match required)
• Physical dimensions: 0.039" L x 0.020" W / 1.00mm x 0.50mm (exact match required)
• Height seated maximum: 0.016" / 0.40mm (exact match required)

Compliance & Environmental Parameters:

• Composition: Thin Film (exact match required)
• Features: Anti-Sulfur, Automotive AEC-Q200 (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Identified substitutes meet all electrical, mechanical, and compliance requirements. Packaging format differences (Tape & Reel versus other formats) do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

RG1005P-913-W-T5 (Direct Substitute)

The RG1005P-913-W-T5 is a direct functional equivalent to the RG1005P-913-W-T1. Both parts share identical electrical specifications (91 kOhms ±0.05%, 0.063W, ±25ppm/°C), mechanical dimensions (0402 package), and compliance certifications (AEC-Q200, ROHS3). The primary distinction is product status: RG1005P-913-W-T5 is active, whereas the main part is obsolete. Packaging format differs (Tape & Reel for the substitute), which does not affect electrical or mechanical compatibility. This part is suitable for direct replacement in all applications.

RG1005N-913-W-T1 (Upgrade Substitute)

The RG1005N-913-W-T1 provides enhanced performance characteristics while maintaining full compatibility. This part offers superior temperature stability with a temperature coefficient of ±10ppm/°C compared to ±25ppm/°C in the main part. All other electrical parameters, mechanical dimensions, and compliance certifications remain identical. The RG1005N-913-W-T1 is active and available in Tape & Reel packaging. This part is suitable for applications requiring improved temperature coefficient performance.

Frequently Asked Questions (FAQ)

Q: Can RG1005P-913-W-T5 be used as a direct replacement for RG1005P-913-W-T1?

A: Yes. The RG1005P-913-W-T5 is electrically and mechanically identical to the RG1005P-913-W-T1. Both parts have 91 kOhms resistance, ±0.05% tolerance, 0.063W power rating, ±25ppm/°C temperature coefficient, and 0402 package dimensions. The substitute is active and available, whereas the main part is obsolete.

Q: What is the difference between RG1005P-913-W-T5 and RG1005N-913-W-T1?

A: The primary difference is temperature coefficient. RG1005P-913-W-T5 has ±25ppm/°C, while RG1005N-913-W-T1 has ±10ppm/°C. All other specifications are identical: 91 kOhms resistance, ±0.05% tolerance, 0.063W power rating, 0402 package, and AEC-Q200 automotive qualification. The RG1005N-913-W-T1 provides superior temperature stability.

Q: Are packaging format differences significant for substitution?

A: Packaging format (Tape & Reel versus other formats) does not affect electrical or mechanical compatibility. Format selection is determined by assembly process requirements and procurement logistics, not component functionality.

Q: Do all substitute parts maintain AEC-Q200 automotive qualification?

A: Yes. Both RG1005P-913-W-T5 and RG1005N-913-W-T1 are AEC-Q200 qualified with anti-sulfur coating, identical to the main part. All three parts are suitable for automotive applications.

Q: Are all parts ROHS3 compliant?

A: Yes. The main part RG1005P-913-W-T1 and both substitutes (RG1005P-913-W-T5 and RG1005N-913-W-T1) are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: Which substitute should be selected for new designs?

A: Selection depends on application requirements. For direct replacement with identical specifications, use RG1005P-913-W-T5. For applications requiring improved temperature stability, use RG1005N-913-W-T1 with its ±10ppm/°C temperature coefficient.