RG1005P-363-D-T10 Equivalent & Substitute Parts

Part Overview

The RG1005P-363-D-T10 is a 36 kOhms ±0.5% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for applications requiring automotive-grade reliability across the -55°C to 155°C operating temperature range. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified to address supply chain requirements, tolerance upgrades, or packaging format preferences while maintaining electrical and mechanical compatibility within the 0402 form factor and 36 kOhms resistance specification.

Substiute Parts

RG1005P-363-D-T10

SusumuIn Stock: 1036RG1005P-363-D-T10 Datasheet

Current PartRFQ

RG1005P-363-B-T5

SusumuIn Stock: 2423RG1005P-363-B-T5 Datasheet

UpgradeRFQ

ERA-2AED363X

Panasonic Electronic ComponentsIn Stock: 26565ERA-2AED363X Datasheet

DirectRFQ

CPF0402B36KE1

TE Connectivity Passive ProductIn Stock: 3013CPF0402B36KE1 Datasheet

UpgradeRFQ

ERA-2AEB363X

Panasonic Electronic ComponentsIn Stock: 85373ERA-2AEB363X Datasheet

UpgradeRFQ

RT0402BRD0736KL

YAGEOIn Stock: 20425RT0402BRD0736KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG1005P-363-D-T10 are classified based on tolerance specification and manufacturer source while maintaining all critical electrical and mechanical parameters.

Substitution Logic:

All substitute parts maintain the following critical parameters identical to the main part:

• Resistance value: 36 kOhms
• Power rating: 0.063W (1/16W)
• Package: 0402 (1005 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C to 155°C
• RoHS3 compliance
• MSL 1 rating
• Number of terminations: 2

Tolerance-Based Grouping:

Parts are grouped into two tolerance classes:

1. Direct Equivalent (±0.5% Tolerance): ERA-2AED363X maintains identical tolerance specification to the main part, providing direct functional equivalence from an alternative manufacturer (Panasonic).

2. Upgrade Substitutes (±0.1% Tolerance): RG1005P-363-B-T5, CPF0402B36KE1, ERA-2AEB363X, and RT0402BRD0736KL offer improved tolerance specification (±0.1%) while maintaining all other critical parameters. These parts provide enhanced accuracy for applications requiring tighter resistance tolerances.

Packaging Format Consideration:

ERA-2AEB363X is supplied in Cut Tape (CT) & Digi-Reel® format, while all other parts use Tape & Reel (TR) packaging. This distinction affects supply chain logistics but does not impact electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

For Direct Equivalent Replacement:

ERA-2AED363X from Panasonic Electronic Components provides direct functional equivalence to RG1005P-363-D-T10. Both parts maintain ±0.5% tolerance, identical power rating, package dimensions, and AEC-Q200 automotive qualification. This part is suitable for applications where tolerance specification and automotive-grade certification are required and manufacturer source substitution is acceptable. Panasonic ERA-2AED363X carries higher inventory availability (26,555 pcs) compared to the main part (1,014 pcs).

For Tolerance Upgrade Applications:

RG1005P-363-B-T5, CPF0402B36KE1, ERA-2AEB363X, and RT0402BRD0736KL all provide ±0.1% tolerance specification, representing a five-fold improvement in accuracy over the main part. Selection among these upgrade options depends on specific requirements:

• RG1005P-363-B-T5: Maintains Susumu manufacturer continuity with upgraded tolerance and Tape & Reel packaging. Suitable for applications requiring same-manufacturer sourcing with improved accuracy.

• ERA-2AEB363X: Panasonic part with AEC-Q200 automotive qualification and ±0.1% tolerance. Available in Cut Tape & Digi-Reel® format with highest inventory (85,297 pcs). Suitable for automotive applications requiring enhanced tolerance and alternative packaging format.

• CPF0402B36KE1 and RT0402BRD0736KL: Both offer ±0.1% tolerance with reduced seated height (0.014" vs. 0.016"). CPF0402B36KE1 from TE Connectivity and RT0402BRD0736KL from YAGEO lack AEC-Q200 certification. These parts are suitable for non-automotive applications where tolerance upgrade and compact height are prioritized.

Automotive Application Considerations:

For applications requiring AEC-Q200 automotive qualification, select from: RG1005P-363-D-T10 (main part), RG1005P-363-B-T5, ERA-2AED363X, or ERA-2AEB363X. All four parts carry automotive-grade certification.

Compliance Status:

All listed parts maintain ROHS3 compliance, MSL 1 rating, and identical electrical performance characteristics across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERA-2AED363X be used as a direct replacement for RG1005P-363-D-T10?

A: Yes. ERA-2AED363X maintains identical resistance (36 kOhms), tolerance (±0.5%), power rating (0.063W), package (0402), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C to 155°C), AEC-Q200 certification, and RoHS3 compliance. The parts are electrically and mechanically equivalent.

Q: What is the difference between the ±0.5% tolerance main part and the ±0.1% tolerance upgrade substitutes?

A: Tolerance specification defines the maximum allowable deviation from the nominal 36 kOhms resistance value. The ±0.5% main part allows resistance variation between 35.82 kOhms and 36.18 kOhms. The ±0.1% upgrade substitutes restrict variation to 35.964 kOhms and 36.036 kOhms, providing five-fold improvement in accuracy. Applications requiring tighter resistance tolerances for precision circuits benefit from upgrade substitutes.

Q: Are CPF0402B36KE1 and RT0402BRD0736KL suitable for automotive applications?

A: CPF0402B36KE1 and RT0402BRD0736KL do not carry AEC-Q200 automotive qualification. These parts are suitable for non-automotive industrial and consumer applications. For automotive applications, select from RG1005P-363-D-T10, RG1005P-363-B-T5, ERA-2AED363X, or ERA-2AEB363X.

Q: What is the significance of the different packaging formats (Tape & Reel vs. Cut Tape & Digi-Reel)?

A: Packaging format affects supply chain logistics and assembly process compatibility. Tape & Reel (TR) format is standard for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® format, used for ERA-2AEB363X, provides flexibility for lower-volume applications and manual assembly. Both formats contain identical components; selection depends on manufacturing process requirements and order quantities.

Q: Why do CPF0402B36KE1 and RT0402BRD0736KL have lower seated height (0.014" vs. 0.016")?

A: Seated height variation results from different manufacturing processes and termination designs among manufacturers. Both heights remain within 0402 package specification and are compatible with standard PCB designs. Height difference is significant only for applications with strict vertical clearance constraints.

Q: Can I substitute a ±0.1% tolerance part for a ±0.5% tolerance requirement?

A: Yes. A ±0.1% tolerance part meets all specifications of a ±0.5% tolerance requirement, as it provides superior accuracy. Substitution in this direction is always valid from an electrical performance standpoint. Cost and availability considerations may apply.

Q: Are all listed parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance status identical to the main part RG1005P-363-D-T10.

Q: What does MSL 1 (Unlimited) moisture sensitivity rating mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. This rating applies to all listed parts and simplifies supply chain management.