RG1005P-1960-P-T1 Equivalent & Substitute Parts

Part Overview

The RG1005P-1960-P-T1 is a 196 Ohm ±0.02% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and stable performance across -55°C to 155°C operating temperature range.

The RG1005P-1960-P-T1 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this component.

Substiute Parts

RG1005P-1960-P-T1

SusumuIn Stock: 898RG1005P-1960-P-T1 Datasheet

Current PartRFQ

RG1005V-1960-P-T1

SusumuIn Stock: 1128RG1005V-1960-P-T1 Datasheet

UpgradeRFQ

ERA-2AEB1960X

Panasonic Electronic ComponentsIn Stock: 21414ERA-2AEB1960X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG1005P-1960-P-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 196 Ohms
• Package / Case: 0402 (1005 Metric)
• Power rating: 0.063W (1/16W) minimum
• Operating temperature range: -55°C ~ 155°C minimum
• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Thin film composition

Allowable Variation Parameters:

• Tolerance: ±0.02% or tighter (lower tolerance values are acceptable)
• Temperature coefficient: May vary within automotive specifications
• Packaging format: Tape & Reel (TR) acceptable for equivalent function
• Product status: Active status preferred for obsolete components

Substitute parts are classified into two categories:

Upgrade Substitutes: Direct replacements with identical or superior electrical specifications and active product status.

Similar Substitutes: Functionally compatible alternatives with minor specification variations that remain within acceptable application parameters.

Parameter Comparison

Engineering Selection Recommendations

RG1005V-1960-P-T1 (Upgrade Substitute - Recommended)

The RG1005V-1960-P-T1 is the primary recommended substitute for the obsolete RG1005P-1960-P-T1. This Susumu component maintains identical electrical specifications (196 Ohms ±0.02%, 0.063W, 0402 package) while offering superior temperature coefficient performance (±5ppm/°C versus ±25ppm/°C). The upgrade substitute carries Active product status, ensuring long-term supply availability and manufacturing continuity. Both components feature anti-sulfur coating and AEC-Q200 automotive qualification. The RG1005V-1960-P-T1 is supplied in Tape & Reel packaging format, standard for production environments. ROHS3 compliance and MSL 1 rating are maintained.

ERA-2AEB1960X (Similar Substitute - Alternative)

The ERA-2AEB1960X from Panasonic Electronic Components provides functional compatibility as a secondary alternative. This component matches the 196 Ohm resistance, 0.063W power rating, 0402 package, and AEC-Q200 automotive qualification. The tolerance specification is ±0.1%, which is wider than the main part's ±0.02% but remains within acceptable parameters for many applications. The ERA-2AEB1960X carries Active product status and ROHS3 compliance. The component does not feature anti-sulfur coating, which may be a consideration for applications requiring enhanced corrosion resistance. Temperature coefficient is ±25ppm/°C, matching the original specification. Inventory availability for this part is significantly higher (21,305 pieces).

Selection Criteria:

For applications requiring the tightest tolerance and anti-sulfur protection, select RG1005V-1960-P-T1. For applications where tolerance of ±0.1% is acceptable and maximum inventory availability is prioritized, ERA-2AEB1960X is suitable. Both substitutes maintain full automotive AEC-Q200 qualification and operating temperature range compatibility.

Frequently Asked Questions (FAQ)

Q: Can RG1005V-1960-P-T1 be used as a direct replacement for RG1005P-1960-P-T1?

A: Yes. The RG1005V-1960-P-T1 is a direct replacement with identical resistance (196 Ohms), tolerance (±0.02%), power rating (0.063W), and package (0402). The upgrade substitute offers improved temperature coefficient performance (±5ppm/°C) and maintains all automotive and compliance certifications.

Q: What is the difference between the upgrade substitute and the similar substitute?

A: The RG1005V-1960-P-T1 (upgrade) maintains the original ±0.02% tolerance and anti-sulfur coating. The ERA-2AEB1960X (similar) has a wider ±0.1% tolerance and lacks anti-sulfur protection. Both meet AEC-Q200 automotive requirements and operate across -55°C to 155°C.

Q: Are all three parts mechanically identical?

A: Yes. All three components share identical physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm) and maximum seated height (0.016" / 0.40mm), ensuring PCB layout compatibility without modification.

Q: Does packaging format affect electrical performance?

A: No. The RG1005P-1960-P-T1 original packaging format differs from the Tape & Reel (TR) format of the substitutes, but packaging format does not affect electrical characteristics, performance, or reliability. Tape & Reel is standard for production assembly.

Q: Are all parts RoHS3 compliant?

A: Yes. The RG1005P-1960-P-T1, RG1005V-1960-P-T1, and ERA-2AEB1960X are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which substitute should be selected for new designs?

A: For new designs, RG1005V-1960-P-T1 is the recommended selection due to Active product status, superior temperature coefficient, and maintained anti-sulfur protection. This ensures long-term supply continuity and optimal performance characteristics.

Q: Can ERA-2AEB1960X be used in applications requiring ±0.02% tolerance?

A: No. The ERA-2AEB1960X tolerance specification is ±0.1%, which exceeds the ±0.02% requirement. This substitute is suitable only for applications where ±0.1% tolerance is acceptable.