RG1005P-152-C-T10 Equivalent & Substitute Parts

Part Overview

The RG1005P-152-C-T10 is a 1.5 kOhms ±0.25% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in temperature ranges from -55°C to 155°C. The part is currently obsolete, necessitating identification of functionally equivalent active alternatives that maintain electrical and mechanical compatibility with existing designs.

Key Parameters

Parameter	Value
Resistance	1.5 kOhms
Tolerance	±0.25%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution compatibility for the RG1005P-152-C-T10 is determined by the following mandatory parameters:

Electrical Parameters:

Resistance value: 1.5 kOhms (exact match required)
Power rating: 0.063W minimum (1/16W)
Operating temperature range: -55°C to 155°C minimum
Package type: 0402 (1005 Metric) (exact match required)
Composition: Thin film construction

Mechanical Parameters:

Physical dimensions: 0.039" L × 0.020" W (1.00mm × 0.50mm)
Height seated maximum: 0.016" to 0.014" (0.40mm to 0.35mm)
Terminations: 2 (standard for chip resistors)

Compliance Parameters:

RoHS3 compliance
Moisture sensitivity level 1

Substitute parts are grouped into two categories:

Upgrade Substitutes (Susumu RG Series): Parts with improved tolerance specifications (±0.1%, ±0.05%, ±0.02%) or lower temperature coefficients (±5ppm/°C, ±10ppm/°C) compared to the original ±0.25% tolerance and ±25ppm/°C coefficient. These maintain identical package, resistance, and power rating while offering enhanced precision characteristics.

Direct Substitutes (Alternative Manufacturers): Parts from TE Connectivity and YAGEO that match the original electrical specifications (1.5 kOhms, ±0.25% tolerance, 0.063W, 0402 package) with equivalent or superior performance characteristics.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Status	AEC-Q200
RG1005P-152-C-T10	Susumu	1.5 kΩ	±0.25%	0.063	±25	0402	Obsolete	Yes
RG1005N-152-B-T5	Susumu	1.5 kΩ	±0.1%	0.063	±10	0402	Active	Yes
RG1005N-152-W-T1	Susumu	1.5 kΩ	±0.05%	0.063	±10	0402	Active	Yes
RG1005P-152-B-T5	Susumu	1.5 kΩ	±0.1%	0.063	±25	0402	Active	Yes
RG1005P-152-W-T5	Susumu	1.5 kΩ	±0.05%	0.063	±25	0402	Active	Yes
RG1005V-152-B-T5	Susumu	1.5 kΩ	±0.1%	0.063	±5	0402	Active	Yes
RG1005V-152-P-T1	Susumu	1.5 kΩ	±0.02%	0.063	±5	0402	Active	Yes
RG1005V-152-W-T1	Susumu	1.5 kΩ	±0.05%	0.063	±5	0402	Active	Yes
RN73C1E1K5BTDF	TE Connectivity	1.5 kΩ	±0.1%	0.063	±10	0402	Active	No
RT0402CRD071K5L	YAGEO	1.5 kΩ	±0.25%	0.063	±25	0402	Active	No
CPF0402B1K5E1	TE Connectivity	1.5 kΩ	±0.1%	0.063	±25	0402	Active	No

Engineering Selection Recommendations

For Direct Replacement (Electrical Equivalence):

The RT0402CRD071K5L from YAGEO provides direct electrical equivalence to the RG1005P-152-C-T10, matching the 1.5 kOhms resistance, ±0.25% tolerance, ±25ppm/°C temperature coefficient, and 0.063W power rating. This part is active and ROHS3 compliant. However, it lacks AEC-Q200 automotive qualification present in the original design.

For Automotive Applications (AEC-Q200 Requirement):

The RG1005P-152-B-T5 from Susumu is the primary upgrade substitute for automotive applications. It maintains AEC-Q200 qualification, identical package dimensions, and equivalent operating temperature range while improving tolerance to ±0.1% and maintaining the ±25ppm/°C temperature coefficient. This part is active with 103,827 units in stock.

For Enhanced Precision Requirements:

When circuit design permits tighter tolerance specifications, the RG1005V-152-P-T1 offers ±0.02% tolerance with ±5ppm/°C temperature coefficient, both superior to the original specification. This part maintains AEC-Q200 qualification and identical package compatibility.

For Non-Automotive Applications:

The RN73C1E1K5BTDF from TE Connectivity (Holsworthy series) provides ±0.1% tolerance and ±10ppm/°C temperature coefficient in the identical 0402 package. This part is active and ROHS3 compliant but does not carry AEC-Q200 rating.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a different tolerance than the original RG1005P-152-C-T10?

A: Yes. Substitute parts with tighter tolerances (±0.1%, ±0.05%, ±0.02%) are electrically compatible and will function in circuits designed for ±0.25% tolerance. The tighter tolerance provides improved precision without compromising circuit operation. Parts with looser tolerances are not suitable substitutes.

Q: What is the difference between the RG1005P and RG1005V series?

A: Both series are Susumu thin film 0402 chip resistors with identical package dimensions and power ratings. The primary difference is temperature coefficient: RG1005P series has ±25ppm/°C while RG1005V series has ±5ppm/°C. The RG1005V series provides superior temperature stability for precision applications.

Q: Does the RT0402CRD071K5L from YAGEO have automotive qualification?

A: No. The RT0402CRD071K5L is ROHS3 compliant and electrically equivalent to the original part but does not carry AEC-Q200 automotive qualification. For automotive applications requiring AEC-Q200 certification, use Susumu RG series substitutes such as RG1005P-152-B-T5.

Q: Are all substitute parts available in the same packaging format?

A: All listed substitute parts are supplied in Tape & Reel (TR) packaging, which is standard for high-volume surface mount assembly. The original RG1005P-152-C-T10 packaging format is not specified in the provided data. Verify packaging requirements for your procurement process.

Q: Can I substitute the RG1005P-152-C-T10 with a part having a lower temperature coefficient?

A: Yes. Parts with lower temperature coefficients (±5ppm/°C, ±10ppm/°C) are direct substitutes for the original ±25ppm/°C specification. Lower temperature coefficients provide improved stability across the operating temperature range and are compatible with all circuit designs using the original part.

Q: What is the physical height difference between substitute parts?

A: The original RG1005P-152-C-T10 has a maximum seated height of 0.016" (0.40mm). Most substitute parts from alternative manufacturers (RN73C1E1K5BTDF, RT0402CRD071K5L, CPF0402B1K5E1) have a maximum seated height of 0.014" (0.35mm). This 0.002" (0.05mm) difference is within standard PCB assembly tolerances and does not affect mechanical compatibility.

Q: Is the RG1005N-152-W-T1 suitable for my application if I need AEC-Q200 certification?

A: Yes. The RG1005N-152-W-T1 is Susumu RG series with AEC-Q200 qualification, ±0.05% tolerance, and ±10ppm/°C temperature coefficient. It provides superior precision and temperature stability compared to the original part while maintaining automotive qualification requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message