RG1005P-1372-B-T5 Equivalent & Substitute Parts

Part Overview

The RG1005P-1372-B-T5 is a 13.7 kOhms ±0.1% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values across extended temperature ranges from -55°C to 155°C. The part is currently active in production with 3204 units in stock. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and component availability options for applications where the primary part may be unavailable or where alternative manufacturers' specifications align with circuit requirements.

Substiute Parts

RG1005P-1372-B-T5

SusumuIn Stock: 3233RG1005P-1372-B-T5 Datasheet

Current PartRFQ

CPF0402B13K7E1

TE Connectivity Passive ProductIn Stock: 4191CPF0402B13K7E1 Datasheet

DirectRFQ

ERA-2AEB1372X

Panasonic Electronic ComponentsIn Stock: 24666ERA-2AEB1372X Datasheet

DirectRFQ

RT0402BRD0713K7L

YAGEOIn Stock: 19200RT0402BRD0713K7L Datasheet

DirectRFQ

TNPW040213K7BEED

Vishay DaleIn Stock: 23170TNPW040213K7BEED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG1005P-1372-B-T5 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 13.7 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0402 (1005 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

Secondary Compatibility Parameters:

• Operating temperature range must encompass or equal the primary part range
• Power rating must equal or exceed the primary part specification
• Automotive AEC-Q200 qualification is a feature match, not a substitution requirement
• Physical dimensions (length, width, height) must be compatible with PCB footprints designed for 0402 packages

All four substitute parts listed meet the primary substitution criteria. Variations in power rating and maximum operating temperature are noted in the parameter comparison table and do not preclude substitution where circuit design permits.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are functionally equivalent to the RG1005P-1372-B-T5 based on core electrical and mechanical parameters. Selection among these alternatives is determined by application-specific requirements and supply chain considerations:

ERA-2AEB1372X (Panasonic Electronic Components) and TNPW040213K7BEED (Vishay Dale) maintain automotive AEC-Q200 qualification matching the primary part specification. ERA-2AEB1372X provides identical operating temperature range (-55°C ~ 155°C) and maximum seated height (0.40mm). TNPW040213K7BEED extends the operating temperature range to 175°C and provides higher power rating (0.13W), with anti-sulfur and moisture-resistant features aligned to the primary part.

CPF0402B13K7E1 (TE Connectivity Passive Product) and RT0402BRD0713K7L (YAGEO) meet all primary substitution criteria with reduced maximum seated height (0.35mm), which may provide advantages in space-constrained PCB layouts. These parts lack automotive AEC-Q200 certification and anti-sulfur features; selection is appropriate for non-automotive applications or where these certifications are not required.

All parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and are currently in active production with substantial inventory availability.

Frequently Asked Questions (FAQ)

Q: Can TNPW040213K7BEED be used as a direct substitute despite its higher power rating (0.13W vs. 0.063W)?

A: Yes. The TNPW040213K7BEED meets all primary substitution criteria including resistance, tolerance, package, composition, temperature coefficient, and moisture sensitivity level. Higher power rating does not preclude substitution; it indicates the component can safely dissipate greater power without degradation. Circuit performance remains unchanged when power dissipation requirements do not exceed the primary part specification.

Q: Are CPF0402B13K7E1 and RT0402BRD0713K7L suitable for automotive applications?

A: CPF0402B13K7E1 and RT0402BRD0713K7L lack automotive AEC-Q200 certification. These parts are suitable for non-automotive applications or automotive applications where AEC-Q200 qualification is not a design requirement. For applications requiring automotive-grade components, ERA-2AEB1372X, TNPW040213K7BEED, or the primary part RG1005P-1372-B-T5 are appropriate selections.

Q: What is the significance of the 0.35mm vs. 0.40mm seated height difference?

A: CPF0402B13K7E1 and RT0402BRD0713K7L have maximum seated heights of 0.35mm, while RG1005P-1372-B-T5, ERA-2AEB1372X, and TNPW040213K7BEED are 0.40mm. Both dimensions are within 0402 package specifications. The 0.05mm difference is negligible for standard PCB designs. Selection based on height is appropriate only for applications with strict vertical clearance constraints.

Q: Do all substitute parts share the same anti-sulfur feature as the primary part?

A: No. Only TNPW040213K7BEED explicitly includes anti-sulfur coating matching the primary part. ERA-2AEB1372X, CPF0402B13K7E1, and RT0402BRD0713K7L do not list anti-sulfur features. For applications requiring anti-sulfur protection, TNPW040213K7BEED or the primary part RG1005P-1372-B-T5 are appropriate selections.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes, all substitute parts are mechanically and electrically compatible with PCB footprints designed for 0402 (1005 Metric) packages. Identical lead spacing, pad dimensions, and solder joint geometry ensure interchangeability. Tape & Reel packaging is standard across all parts, supporting automated assembly processes without modification.

Q: What is the operating temperature range difference between TNPW040213K7BEED and other substitutes?

A: TNPW040213K7BEED operates from -55°C to 175°C, extending 20°C above the primary part and other substitutes (-55°C to 155°C). This extended range is beneficial for applications subject to elevated ambient or component temperatures. For applications operating within -55°C to 155°C, all parts perform identically.

Q: Are all parts REACH compliant?

A: Yes. All parts, including the primary RG1005P-1372-B-T5 and all four substitutes, carry REACH Unaffected status, indicating compliance with REACH regulations.