RG1005P-1330-B-T5 Equivalent & Substitute Parts

Part Overview

The RG1005P-1330-B-T5 is a 133 Ohm ±0.1% thin film chip resistor manufactured by Susumu in 0402 (1005 Metric) package format. This surface-mount device is rated for 0.063W (1/16W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 858 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring this specific resistance value and electrical performance.

Substiute Parts

RG1005P-1330-B-T5

SusumuIn Stock: 946RG1005P-1330-B-T5 Datasheet

Current PartRFQ

CPF0402B133RE1

TE Connectivity Passive ProductIn Stock: 2099CPF0402B133RE1 Datasheet

DirectRFQ

ERA-2AEB1330X

Panasonic Electronic ComponentsIn Stock: 19267ERA-2AEB1330X Datasheet

DirectRFQ

RT0402BRD07133RL

YAGEOIn Stock: 23441RT0402BRD07133RL Datasheet

DirectRFQ

TNPW0402133RBEED

Vishay DaleIn Stock: 9741TNPW0402133RBEED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG1005P-1330-B-T5 is determined by the following critical parameters:

Primary Matching Criteria:

• Resistance value: 133 Ohms
• Tolerance: ±0.1%
• Package: 0402 (1005 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Compliance: ROHS3 Compliant

Secondary Compatibility Factors:

• Operating temperature range: -55°C minimum to 155°C minimum
• Power rating: 0.063W minimum
• Termination count: 2 terminations
• Packaging format: Tape & Reel (TR)

All identified substitute parts meet or exceed these parameters. Substitutes are grouped into two categories based on power rating capability: standard 0.063W (1/16W) rated parts and enhanced 0.13W rated parts. All substitutes maintain identical electrical specifications for resistance, tolerance, and temperature coefficient, ensuring functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the RG1005P-1330-B-T5 for standard circuit applications requiring 133 Ohm ±0.1% thin film resistors in 0402 package format.

Standard Power Rating (0.063W / 1/16W) Substitutes:

CPF0402B133RE1 (TE Connectivity), ERA-2AEB1330X (Panasonic), and RT0402BRD07133RL (YAGEO) are direct electrical equivalents with identical power ratings. These parts are suitable for applications with standard thermal dissipation requirements. ERA-2AEB1330X carries automotive AEC-Q200 qualification matching the original part specification. CPF0402B133RE1 and RT0402BRD07133RL offer slightly reduced seated height (0.014" vs 0.016"), which may provide advantages in space-constrained PCB layouts.

Enhanced Power Rating (0.13W) Substitute:

TNPW0402133RBEED (Vishay Dale) provides double the power dissipation capability (0.13W) while maintaining all other electrical parameters. This part includes anti-sulfur coating, automotive AEC-Q200 qualification, and moisture-resistant features. The extended operating temperature range (-55°C ~ 175°C) supports applications requiring higher thermal performance. This substitute is suitable for applications where increased power headroom is beneficial.

Automotive Applications:

For applications requiring automotive qualification, ERA-2AEB1330X and TNPW0402133RBEED both carry AEC-Q200 ratings. The original RG1005P-1330-B-T5 also includes AEC-Q200 qualification with anti-sulfur coating.

Compliance and Regulatory:

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory compatibility with the original specification.

Frequently Asked Questions (FAQ)

Q: Can CPF0402B133RE1 be used as a direct replacement for RG1005P-1330-B-T5?

A: Yes. CPF0402B133RE1 meets all critical electrical parameters: 133 Ohm resistance, ±0.1% tolerance, ±25ppm/°C temperature coefficient, 0.063W power rating, and 0402 package format. Both parts are ROHS3 compliant with MSL 1 rating. The primary difference is manufacturer (TE Connectivity vs. Susumu) and slightly reduced seated height (0.014" vs. 0.016").

Q: What is the difference between the standard 0.063W and the 0.13W TNPW0402133RBEED substitute?

A: The TNPW0402133RBEED provides double the power dissipation capability (0.13W vs. 0.063W) while maintaining identical resistance, tolerance, and temperature coefficient specifications. This higher power rating allows the part to handle greater thermal stress in applications with higher current flow. The extended operating temperature range (-55°C ~ 175°C vs. -55°C ~ 155°C) provides additional thermal margin. All other electrical and mechanical parameters remain equivalent.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) format, matching the original RG1005P-1330-B-T5 packaging specification.

Q: Which substitute part has the highest inventory availability?

A: RT0402BRD07133RL (YAGEO) has the highest inventory with 23,408 units in stock, followed by ERA-2AEB1330X (Panasonic) with 19,201 units. Both exceed the original part's inventory of 858 units.

Q: Do all substitute parts meet automotive qualification requirements?

A: ERA-2AEB1330X and TNPW0402133RBEED both carry AEC-Q200 automotive qualification. CPF0402B133RE1 and RT0402BRD07133RL do not list AEC-Q200 qualification. For automotive applications requiring this certification, ERA-2AEB1330X or TNPW0402133RBEED are the appropriate selections.

Q: What is the significance of the ±25ppm/°C temperature coefficient across all parts?

A: The ±25ppm/°C temperature coefficient indicates the maximum resistance change per degree Celsius across the operating temperature range. All listed parts, including substitutes, maintain this identical specification, ensuring consistent circuit performance across temperature variations from -55°C to 155°C (or 175°C for TNPW0402133RBEED).

Q: Can the seated height difference between 0.014" and 0.016" affect PCB assembly?

A: The 0.002" (0.05mm) height difference is within standard PCB assembly tolerances and does not affect functional compatibility. However, in applications with extremely tight vertical clearance constraints, the lower-profile parts (CPF0402B133RE1 and RT0402BRD07133RL at 0.014") may provide layout advantages.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts, including the original RG1005P-1330-B-T5 and all substitutes, are ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements.