RG1005N-563-C-T10 Equivalent & Substitute Parts

Part Overview

The RG1005N-563-C-T10 is a 56 kOhms ±0.25% thin film chip resistor in 0402 (1005 Metric) package rated for 0.063W (1/16W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications across an operating temperature range of -55°C to 155°C. The part is currently classified as obsolete. Equivalent and substitute parts with improved tolerance specifications and active product status are available to support continued design implementation and production requirements.

Substiute Parts

RG1005N-563-C-T10

SusumuIn Stock: 936RG1005N-563-C-T10 Datasheet

Current PartRFQ

RG1005N-563-B-T5

SusumuIn Stock: 920RG1005N-563-B-T5 Datasheet

UpgradeRFQ

RG1005N-563-W-T1

SusumuIn Stock: 768RG1005N-563-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG1005N-563-C-T10 is determined by the following critical parameters that must remain constant across all equivalent parts:

Fixed Parameters (Non-Negotiable):

• Resistance value: 56 kOhms
• Package / Case: 0402 (1005 Metric)
• Power rating: 0.063W (1/16W)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C to 155°C
• Features: Anti-Sulfur, Automotive AEC-Q200
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Height - Seated (Max): 0.016" (0.40mm)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters (Substitution Basis):

• Tolerance specification (±0.25%, ±0.1%, ±0.05%)
• Product status (Obsolete vs. Active)
• Packaging format (Tape & Reel vs. other formats)

The substitute parts listed below maintain all fixed parameters while offering improved tolerance specifications and active product availability status.

Parameter Comparison

Engineering Selection Recommendations

RG1005N-563-B-T5 (±0.1% Tolerance)

This substitute part provides improved tolerance specification (±0.1% versus ±0.25%) while maintaining all electrical and mechanical characteristics of the main part. The RG1005N-563-B-T5 is classified as active product status, ensuring continued availability and supply chain support. This part is suitable for applications requiring tighter tolerance control than the original specification while maintaining full automotive AEC-Q200 compliance and anti-sulfur coating protection.

RG1005N-563-W-T1 (±0.05% Tolerance)

This substitute part offers the highest tolerance specification (±0.05%) among available alternatives. The RG1005N-563-W-T1 is classified as active product status with confirmed inventory availability. This part is appropriate for precision circuit applications demanding superior tolerance performance while retaining all automotive-grade qualifications and environmental protection features of the original component.

Both substitute parts are electrically and mechanically interchangeable with the RG1005N-563-C-T10 within the specified parameter constraints. Selection between substitutes depends on application tolerance requirements and cost considerations.

Frequently Asked Questions (FAQ)

Q: Can RG1005N-563-B-T5 or RG1005N-563-W-T1 be used as direct replacements for RG1005N-563-C-T10?

A: Yes. Both substitute parts maintain identical resistance value (56 kOhms), package format (0402 / 1005 Metric), power rating (0.063W), temperature coefficient (±10ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 qualification. The substitutes offer improved tolerance specifications and active product status. Physical dimensions and mounting characteristics are identical, enabling direct PCB-level substitution.

Q: What is the difference between the three parts?

A: The primary difference is tolerance specification. RG1005N-563-C-T10 specifies ±0.25% tolerance, RG1005N-563-B-T5 specifies ±0.1% tolerance, and RG1005N-563-W-T1 specifies ±0.05% tolerance. All other electrical and mechanical parameters remain constant. The main part is obsolete; both substitutes are active products.

Q: Are there any package or footprint differences?

A: No. All three parts use identical 0402 (1005 Metric) package format with matching physical dimensions of 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm). PCB footprints and assembly processes are identical.

Q: Do the substitute parts maintain automotive qualification?

A: Yes. Both RG1005N-563-B-T5 and RG1005N-563-W-T1 carry automotive AEC-Q200 rating, anti-sulfur coating, and identical operating temperature range (-55°C to 155°C). RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating are maintained across all parts.

Q: Which substitute should be selected for new designs?

A: Selection depends on circuit tolerance requirements. For applications requiring tolerance better than ±0.25%, RG1005N-563-B-T5 (±0.1%) provides a balanced solution. For precision applications demanding maximum tolerance control, RG1005N-563-W-T1 (±0.05%) is appropriate. Both parts are active products with confirmed inventory availability.

Q: Are there any thermal or frequency performance differences?

A: No. Temperature coefficient (±10ppm/°C) and operating temperature range (-55°C to 155°C) are identical across all three parts. Thin film composition and electrical characteristics remain constant.