RG1005N-3402-C-T10 Equivalent & Substitute Parts

Part Overview

The RG1005N-3402-C-T10 is a 34 kOhms ±0.25% thin film chip resistor in 0402 (1005 Metric) package rated for automotive applications under AEC-Q200 standard. This component is classified as obsolete product status. Equivalent and substitute parts are necessary to maintain design continuity and ensure procurement availability for applications requiring 34 kOhm resistive elements with automotive-grade specifications.

Substiute Parts

RG1005N-3402-C-T10

SusumuIn Stock: 916RG1005N-3402-C-T10 Datasheet

Current PartRFQ

RG1005N-3402-B-T5

SusumuIn Stock: 888RG1005N-3402-B-T5 Datasheet

UpgradeRFQ

RG1005N-3402-W-T1

SusumuIn Stock: 898RG1005N-3402-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG1005N-3402-C-T10 is determined by the following critical parameters that must remain constant across all equivalent parts:

Fixed Parameters (Non-Negotiable):

• Resistance value: 34 kOhms
• Package type: 0402 (1005 Metric)
• Power rating: 0.063W (1/16W)
• Composition: Thin Film
• Temperature coefficient: ±10ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive rating: AEC-Q200
• Anti-Sulfur feature
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Height seated (max): 0.016" (0.40mm)
• Terminations: 2
• RoHS3 compliance
• MSL 1 rating

Variable Parameters (Allowed to Differ):

• Tolerance: May be tighter (lower tolerance values are acceptable upgrades)
• Product status: Active status parts are preferred over obsolete
• Packaging format: Tape & Reel (TR) is acceptable alternative to original packaging

The substitute parts listed below maintain all fixed parameters while offering improved tolerance specifications and active product status.

Parameter Comparison

Engineering Selection Recommendations

RG1005N-3402-B-T5 is suitable for applications where the main part RG1005N-3402-C-T10 is unavailable. This substitute provides improved tolerance specification (±0.1% versus ±0.25%) while maintaining all automotive-grade certifications, AEC-Q200 rating, and physical compatibility. Active product status ensures long-term availability and supply chain continuity.

RG1005N-3402-W-T1 is suitable for applications requiring the highest tolerance precision. This substitute provides the tightest tolerance specification (±0.05%) available within the Susumu RG series for this resistance value and package. All automotive qualifications, AEC-Q200 rating, and dimensional specifications remain identical to the main part. Active product status supports sustained procurement.

Both substitute parts are manufactured by Susumu under identical series designation (RG) and maintain full compatibility with the original design specifications for 0402 package footprints, thermal performance, and automotive environmental requirements.

Frequently Asked Questions (FAQ)

Q: Can RG1005N-3402-B-T5 or RG1005N-3402-W-T1 be used as direct replacements for RG1005N-3402-C-T10?

A: Yes. Both substitute parts maintain identical resistance value (34 kOhms), package type (0402), power rating (0.063W), temperature coefficient (±10ppm/°C), operating temperature range (-55°C to 155°C), and AEC-Q200 automotive qualification. The substitute parts offer tighter tolerance specifications, which are compatible with applications designed for the original part.

Q: What is the difference between the three parts?

A: The primary difference is tolerance specification. RG1005N-3402-C-T10 specifies ±0.25% tolerance, RG1005N-3402-B-T5 specifies ±0.1% tolerance, and RG1005N-3402-W-T1 specifies ±0.05% tolerance. All other electrical and mechanical parameters are identical. The substitute parts also feature active product status compared to the obsolete status of the main part.

Q: Are the physical dimensions identical across all three parts?

A: Yes. All three parts use the 0402 (1005 Metric) package with identical dimensions of 0.039" L x 0.020" W (1.00mm x 0.50mm) and maximum seated height of 0.016" (0.40mm). PCB footprints and assembly processes are interchangeable.

Q: Do the substitute parts meet automotive specifications?

A: Yes. Both RG1005N-3402-B-T5 and RG1005N-3402-W-T1 are rated to AEC-Q200 automotive standard, feature anti-sulfur construction, and operate across the full temperature range of -55°C to 155°C. RoHS3 compliance and MSL 1 rating are maintained across all parts.

Q: What packaging formats are available for the substitute parts?

A: The substitute parts RG1005N-3402-B-T5 and RG1005N-3402-W-T1 are supplied in Tape & Reel (TR) packaging format. This format is standard for automated assembly processes and is compatible with standard pick-and-place equipment.

Q: Why is the main part listed as obsolete?

A: Product status reflects manufacturer lifecycle classification. The substitute parts with active status provide equivalent functionality with improved tolerance specifications and assured long-term availability.

Q: Can a tighter tolerance part be used in place of a wider tolerance specification?

A: Yes. Applications designed for ±0.25% tolerance can utilize parts with ±0.1% or ±0.05% tolerance without circuit redesign. Tighter tolerance specifications provide enhanced precision and are fully compatible with designs accepting wider tolerances.