RFNA4PCCF Equivalent & Substitute Parts

Part Overview

The RFNA4PCCF is an N Type Connector Plug with male pin configuration, manufactured by Bulgin for RF coaxial applications. This component is a 50 Ohm panel mount connector featuring compression contact termination and screw shield termination, designed for frequencies up to 18 GHz. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

RFNA4PCCF

BulginIn Stock: 697RFNA4PCCF Datasheet

Current PartRFQ

RFNA4PGID

BulginIn Stock: 1256RFNA4PGID Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RFNA4PCCF is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RFNA4PGID qualifies as a parametric equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Connector Style: N Type
• Impedance: 50 Ohms
• Frequency - Max: 18 GHz
• Voltage Rating: 500 V

Mechanical Parameters (Must Match Exactly):

• Connector Type: Plug, Male Pin
• Mounting Type: Panel Mount
• Mounting Feature: Flange
• Contact Termination: Compression
• Shield Termination: Screw
• Fastening Type: Threaded
• Number of Ports: 1

Material & Environmental Parameters (Must Match Exactly):

• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Dielectric Material: Polyetherimide (PEI)
• Operating Temperature: -55°C ~ 155°C
• Mating Cycles: 500

Compliance Parameters (Must Match Exactly):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

Both RFNA4PCCF and RFNA4PGID are Active status products manufactured by Bulgin with full ROHS3 compliance and identical electrical, mechanical, and environmental specifications. Selection between these part numbers is based on inventory availability and supply chain requirements rather than technical performance differences.

The RFNA4PCCF currently maintains 663 pieces in stock, while the RFNA4PGID maintains 1171 pieces in stock. Both parts are supplied in Bulk packaging and carry identical compliance certifications including ROHS3 status, EAR99 ECCN classification, and HTSUS code 8536.69.4010.

For applications requiring N Type 50 Ohm panel mount connectors with compression termination and operating specifications within -55°C to 155°C, either part number provides equivalent performance and interchangeability.

Frequently Asked Questions (FAQ)

Q: Are RFNA4PCCF and RFNA4PGID electrically interchangeable?

A: Yes. Both parts are N Type connectors with identical 50 Ohm impedance, 18 GHz maximum frequency, 500 V voltage rating, and compression contact termination. Electrical performance is equivalent across all specified parameters.

Q: Can RFNA4PGID be used as a direct replacement for RFNA4PCCF in existing designs?

A: Yes. The parts are mechanically and electrically identical. Both feature panel mount flange configuration with threaded fastening, identical materials (Beryllium Copper contacts, Stainless Steel body, Polyetherimide dielectric), and identical operating temperature range of -55°C to 155°C.

Q: What is the difference between these two part numbers?

A: No functional or performance differences exist between RFNA4PCCF and RFNA4PGID. Both are manufactured by Bulgin and share identical specifications across all electrical, mechanical, material, and environmental parameters. The part numbers represent alternative stock sources.

Q: Are both parts ROHS3 compliant?

A: Yes. Both RFNA4PCCF and RFNA4PGID carry ROHS3 compliance certification and are classified as Moisture Sensitivity Level 1 (Unlimited).

Q: What is the mating cycle rating for these connectors?

A: Both parts are rated for 500 mating cycles, indicating the expected number of connection and disconnection operations before performance degradation.

Q: Are these parts suitable for high-frequency RF applications?

A: Yes. Both connectors support frequencies up to 18 GHz and maintain 50 Ohm impedance, making them suitable for RF and microwave applications within this frequency range.

Q: What packaging format is available for these parts?

A: Both RFNA4PCCF and RFNA4PGID are supplied in Bulk packaging.