RF700073 RFID Tag Read/Write Inlay Equivalent & Substitute Parts

Part Overview

The RF700073 is an RFID tag read/write inlay manufactured by Avery Dennison RFID, designed for 14.66MHz passive RFID applications compliant with ISO 14443 standards. This component features 144 bytes of user-writable memory and operates across a temperature range of -25°C to 50°C. The product is currently classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and component procurement.

Substiute Parts

RF700073

Avery Dennison RFIDIn Stock: 1022RF700073 Datasheet

Current PartRFQ

3007487

Avery Dennison RFIDIn Stock: 12793007487 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RF700073 is determined by the following critical parameters:

• Frequency: 14.66MHz operation is mandatory for system compatibility
• Technology: Passive RFID technology without external power source
• Memory Type: Read/Write capability required for dynamic data storage
• Standards Compliance: ISO 14443 protocol support for interoperability
• Form Factor: Inlay configuration for integration into label and tag assemblies
• Operating Temperature Range: -25°C to 50°C environmental tolerance
• Physical Dimensions: 18.00mm x 8.00mm footprint for space-constrained applications

The substitute part 3007487 from Avery Dennison RFID is identified as a functionally equivalent alternative. However, complete parameter alignment cannot be confirmed due to incomplete technical specification data for the substitute part.

Parameter Comparison

Engineering Selection Recommendations

The RF700073 is classified as obsolete. The substitute part 3007487 is currently in active production status with 1172 units available in inventory, compared to 947 units of the RF700073. Both components are manufactured by Avery Dennison RFID, ensuring consistent design and quality standards.

Selection of part 3007487 as a replacement is supported by the active product status and current availability. However, complete technical specification verification is required before implementation, as critical parameters including frequency, memory configuration, standards compliance, and physical dimensions are not fully documented for the substitute part.

Frequently Asked Questions (FAQ)

Q: What makes RF700073 and 3007487 substitutable? A: Both parts are manufactured by Avery Dennison RFID and are classified as RFID tag inlays. The substitute part 3007487 is in active production, whereas RF700073 is obsolete.

Q: Are the physical dimensions identical between RF700073 and 3007487? A: Physical dimension data for part 3007487 is not provided in the available specifications. Dimension verification is required before substitution.

Q: Does part 3007487 support the same 14.66MHz frequency and ISO 14443 standard? A: Frequency and standards compliance data for part 3007487 is not specified in the available documentation. Technical confirmation from the manufacturer is necessary.

Q: What is the memory capacity of part 3007487? A: Memory specifications for part 3007487 are not documented. The RF700073 provides 144 bytes of user-writable memory; equivalent capacity in the substitute part must be confirmed.

Q: Can I use part 3007487 as a direct replacement in existing designs? A: Direct replacement requires verification that part 3007487 matches all critical parameters of RF700073, including frequency, memory type, memory capacity, physical dimensions, and standards compliance. Complete technical specifications for part 3007487 must be obtained from Avery Dennison RFID before implementation.

Q: What is the RoHS compliance status of part 3007487? A: RoHS compliance information for part 3007487 is not provided. Confirmation of regulatory compliance is required for applications subject to RoHS requirements.