RF600366 RFID Tag Read/Write Inlay - Equivalent & Substitute Parts

Part Overview

The RF600366 is a passive RFID tag inlay operating in the 860MHz to 960MHz frequency band with 128-bit EPC memory capacity. Designed to meet EPC and ISO 18000-6 standards, this component is classified as obsolete. Due to its discontinued status, identifying functionally compatible substitute parts is essential for ongoing system integration and component procurement.

Substiute Parts

RF600366

Avery Dennison RFIDIn Stock: 1148RF600366 Datasheet

Current PartRFQ

RF600591

Avery Dennison RFIDIn Stock: 797RF600591 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RF600366 is determined by the following critical parameters:

• Frequency Range: Must operate within 860MHz ~ 960MHz to maintain compatibility with existing reader infrastructure
• Technology Type: Must be passive RFID technology
• Form Factor: Must be an inlay configuration
• Standards Compliance: Must support EPC and ISO 18000-6 standards
• Memory Type: Must provide read/write capability
• Operating Temperature: Must maintain -40°C ~ 85°C operational range
• RoHS Compliance: Must meet RoHS requirements for regulatory alignment

The RF600591 meets all substitution criteria within these parameters.

Parameter Comparison

Engineering Selection Recommendations

The RF600591 is a direct functional substitute for the RF600366 based on compliance with all critical operational parameters. Both components operate identically within the 860MHz ~ 960MHz frequency band, maintain equivalent temperature ranges, and satisfy EPC and ISO 18000-6 standards.

The primary distinction is product status: RF600366 is obsolete while RF600591 is active, ensuring continued availability and manufacturing support. The RF600591 operates with 96-bit EPC memory compared to the 128-bit capacity of the RF600366; this reduction in memory capacity must be evaluated against specific application requirements.

Physical dimensions are nearly identical, with negligible differences (0.001" length variance, 0.011" width variance) that do not impact mechanical integration. Packaging format differs (bulk versus Tape & Reel), which may affect procurement and assembly workflows but does not affect electrical or functional performance.

Frequently Asked Questions (FAQ)

Q: Can RF600591 replace RF600366 in existing applications?

A: Yes, provided the application does not require the full 128-bit EPC memory capacity of the RF600366. The RF600591 supplies 96-bit EPC memory and maintains all other operational parameters including frequency range, temperature tolerance, and standards compliance.

Q: Are there physical compatibility concerns?

A: Physical dimensions are nearly equivalent. The RF600591 measures 3.740" L x 0.310" W versus 3.741" L x 0.321" W for the RF600366. These minimal differences do not affect mechanical fit or integration in standard inlay applications.

Q: Does the packaging format affect electrical performance?

A: No. The RF600591 is supplied in Tape & Reel (TR) packaging while the RF600366 was supplied in bulk format. Packaging affects procurement and assembly logistics only; electrical and functional characteristics remain identical.

Q: Are both parts RoHS compliant?

A: Yes. Both RF600366 and RF600591 meet RoHS compliance requirements and carry Moisture Sensitivity Level 1 (Unlimited) ratings.

Q: What is the primary reason to transition from RF600366 to RF600591?

A: The RF600366 is obsolete. The RF600591 is an active product with ongoing manufacturing support, ensuring long-term component availability and supply chain continuity.