RF55-33N-T-00-50-A-SH Equivalent & Substitute Parts

Part Overview

The RF55-33N-T-00-50-A-SH is an SMB Fakra connector plug manufactured by Adam Tech, designed for 50 Ohm RF applications with right angle through-hole solder termination. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, enabling design flexibility and supply chain continuity.

Substiute Parts

RF55-33N-T-00-50-A-SH

Adam TechIn Stock: 885RF55-33N-T-00-50-A-SH Datasheet

Current PartRFQ

RF55-23N-T-00-50-G-A-SH

Adam TechIn Stock: 802RF55-23N-T-00-50-G-A-SH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between RF55-33N-T-00-50-A-SH and RF55-23N-T-00-50-G-A-SH is established based on matching critical electrical and mechanical parameters: both maintain SMB Fakra connector style with male pin configuration, 50 Ohm impedance, through-hole right angle mounting, solder termination for both contact and shield, 4 GHz maximum frequency, single port configuration, and locking ramp fastening. Both parts operate across -40°C to 85°C temperature range with MSL 1 rating and ROHS3 compliance. Variations in center contact material (Phosphor Bronze versus Brass) and body finish specifications do not affect connector interface compatibility or RF performance within the specified frequency and impedance parameters.

Parameter Comparison

Engineering Selection Recommendations

Both RF55-33N-T-00-50-A-SH and RF55-23N-T-00-50-G-A-SH maintain Active product status with identical compliance certifications (ROHS3 Compliant, REACH Unaffected, EAR99 classification). Selection between these parts is determined by supply availability and inventory status rather than functional or regulatory constraints. Both connectors satisfy identical electrical specifications for 50 Ohm RF applications at frequencies up to 4 GHz with equivalent mechanical interface characteristics. Material composition differences (center contact and body finish) do not alter connector compatibility or performance within specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Are RF55-33N-T-00-50-A-SH and RF55-23N-T-00-50-G-A-SH mechanically interchangeable?

A: Yes. Both connectors maintain identical SMB Fakra plug configuration with male pin termination, through-hole right angle mounting, and locking ramp fastening. Mechanical interface compatibility is preserved across both part numbers.

Q: Do material differences affect RF performance?

A: No. Center contact material (Phosphor Bronze versus Brass) and body finish variations do not impact electrical performance within the specified 50 Ohm impedance and 4 GHz frequency parameters.

Q: Are both parts compliant with current regulations?

A: Yes. Both RF55-33N-T-00-50-A-SH and RF55-23N-T-00-50-G-A-SH are ROHS3 Compliant and REACH Unaffected with identical MSL 1 moisture sensitivity ratings.

Q: What determines substitution eligibility?

A: Substitution is based on matching connector style, connector type, impedance, mounting configuration, termination method, frequency rating, and operating temperature range. Both parts satisfy these criteria.

Q: Can these connectors be used interchangeably in production?

A: Yes, provided design documentation permits material and finish variations. Both parts maintain identical electrical and mechanical interface specifications for 50 Ohm through-hole right angle solder applications.