RF55-32M-T-00-50-A-SH Equivalent & Substitute Parts

Part Overview

The RF55-32M-T-00-50-A-SH is an SMB Fakra connector plug manufactured by Adam Tech, designed for 50 Ohm RF applications with through-hole, right-angle solder termination. This connector is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the RF series, enabling direct replacement in circuit designs where connector footprint and performance specifications remain constant.

Substiute Parts

RF55-32M-T-00-50-A-SH

Adam TechIn Stock: 742RF55-32M-T-00-50-A-SH Datasheet

Current PartRFQ

RF55-23M-T-00-50-G-A-SH

Adam TechIn Stock: 1202RF55-23M-T-00-50-G-A-SH Datasheet

Parametric EquivalentRFQ

RF55-33M-T-00-50-A-SH

Adam TechIn Stock: 820RF55-33M-T-00-50-A-SH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RF55-32M-T-00-50-A-SH are qualified based on the following critical parameters that must remain constant:

• Connector Style: SMB, Fakra
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 4 GHz
• Number of Ports: 1
• Features: Code M
• Housing Color: Orange, Pastel
• Fastening Type: Locking Ramp
• Operating Temperature: -40°C ~ 85°C
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The following parts meet these criteria and are qualified substitutes:

• RF55-23M-T-00-50-G-A-SH
• RF55-33M-T-00-50-A-SH

Parameter Comparison

Engineering Selection Recommendations

All three parts—RF55-32M-T-00-50-A-SH, RF55-23M-T-00-50-G-A-SH, and RF55-33M-T-00-50-A-SH—maintain active product status and full ROHS3 compliance. Each part carries REACH Unaffected status and EAR99 classification, meeting regulatory requirements for RF connector applications. Selection among these substitutes is determined by material specifications and finish requirements specific to the application, as all electrical and mechanical parameters remain equivalent across the group.

Frequently Asked Questions (FAQ)

Q: Can RF55-23M-T-00-50-G-A-SH replace RF55-32M-T-00-50-A-SH in my design?

A: Yes. Both parts maintain identical electrical specifications (50 Ohm impedance, 4 GHz maximum frequency), mechanical configuration (SMB Fakra plug, through-hole right angle), and termination method (solder). The primary difference is center contact material (Brass vs. Phosphor Bronze) and body finish (Gold vs. Tin/Nickel), which do not affect functional compatibility when electrical and mechanical requirements are met.

Q: What is the difference between RF55-33M-T-00-50-A-SH and RF55-32M-T-00-50-A-SH?

A: Both parts are electrically and mechanically equivalent. RF55-33M-T-00-50-A-SH features Phosphor Bronze center contact material (matching RF55-32M-T-00-50-A-SH) but differs in body finish specification (Gold/Nickel vs. Tin/Nickel).

Q: Are all three parts available in the same packaging?

A: Yes. RF55-32M-T-00-50-A-SH, RF55-23M-T-00-50-G-A-SH, and RF55-33M-T-00-50-A-SH are all supplied in Tray packaging.

Q: Do these connectors support the same frequency range?

A: Yes. All three parts are rated to 4 GHz maximum frequency and are suitable for identical RF applications within this bandwidth.

Q: What is the operating temperature range for these connectors?

A: All three parts operate across -40°C to 85°C, providing equivalent thermal performance for industrial and commercial applications.