RF55-23H-T-00-50-G-A-SH Equivalent & Substitute Parts

Part Overview

The RF55-23H-T-00-50-G-A-SH is an SMB Fakra connector plug manufactured by Adam Tech, designed for 50 Ohm coaxial applications requiring right-angle through-hole solder termination. This component operates across RF frequencies up to 4 GHz and is classified as Active product status. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

RF55-23H-T-00-50-G-A-SH

Adam TechIn Stock: 1232RF55-23H-T-00-50-G-A-SH Datasheet

Current PartRFQ

RF55-33H-T-00-50-A-SH

Adam TechIn Stock: 857RF55-33H-T-00-50-A-SH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RF55-23H-T-00-50-G-A-SH is determined by strict equivalence across the following critical parameters:

• Connector Style: SMB, Fakra
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Through Hole, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 4 GHz
• Operating Temperature: -40°C ~ 85°C
• Product Status: Active
• RoHS Status: ROHS3 Compliant

The substitute part RF55-33H-T-00-50-A-SH meets all critical electrical and mechanical parameters required for direct substitution in applications utilizing the RF55-23H-T-00-50-G-A-SH.

Parameter Comparison

Engineering Selection Recommendations

Both RF55-23H-T-00-50-G-A-SH and RF55-33H-T-00-50-A-SH are Active status products with ROHS3 compliance and REACH Unaffected designation, meeting current regulatory requirements for electronic component deployment. Selection between these parts should be based on inventory availability and specific application requirements related to center contact material composition and body finish specifications. Both components satisfy identical electrical performance criteria for 50 Ohm RF applications operating to 4 GHz.

Frequently Asked Questions (FAQ)

Q: Can RF55-33H-T-00-50-A-SH be used as a direct replacement for RF55-23H-T-00-50-G-A-SH?

A: Yes. Both parts maintain identical electrical specifications (50 Ohms, 4 GHz maximum frequency), mechanical configuration (SMB Fakra plug, right-angle through-hole solder termination), and operating parameters (-40°C ~ 85°C). Differences in center contact material (Brass vs. Phosphor Bronze) and body finish (Gold vs. Gold/Nickel) do not affect functional compatibility.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by equivalence in connector style (SMB, Fakra), connector type (Plug, Male Pin), impedance (50 Ohms), mounting configuration (Through Hole, Right Angle), termination method (Solder), frequency rating (4 GHz), and operating temperature range (-40°C ~ 85°C).

Q: Are there packaging differences between these parts?

A: Both parts are supplied in Tray packaging. Inventory levels differ: RF55-23H-T-00-50-G-A-SH has 1158 Pcs available, while RF55-33H-T-00-50-A-SH has 817 Pcs available.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 Compliant, REACH Unaffected, classified as EAR99, and share the same HTSUS code (8536.69.4010). Moisture Sensitivity Level is 1 (Unlimited) for both.

Q: What is the difference in center contact material?

A: RF55-23H-T-00-50-G-A-SH uses Brass center contact material, while RF55-33H-T-00-50-A-SH uses Phosphor Bronze. Both materials are suitable for 50 Ohm RF applications and do not affect electrical performance within the specified frequency and temperature ranges.