RF55-23F-T-00-50-G-A-SH Equivalent & Substitute Parts

Part Overview

The RF55-23F-T-00-50-G-A-SH is an SMB Fakra connector plug manufactured by Adam Tech, designed for 50 Ohm coaxial applications with right-angle through-hole solder termination. This component operates across RF frequencies up to 4 GHz and is classified as Active product status with full ROHS3 compliance. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

RF55-23F-T-00-50-G-A-SH

Adam TechIn Stock: 1042RF55-23F-T-00-50-G-A-SH Datasheet

Current PartRFQ

RF55-33F-T-00-50-A-SH

Adam TechIn Stock: 1066RF55-33F-T-00-50-A-SH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RF55-23F-T-00-50-G-A-SH is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: SMB, Fakra plug with male pin configuration
• Electrical Specification: 50 Ohm impedance
• Mounting Configuration: Through hole, right-angle orientation
• Termination Method: Solder contact and shield termination
• Frequency Range: Maximum 4 GHz operation
• Operating Temperature Range: -40°C to 85°C
• Compliance Status: ROHS3 Compliant, REACH Unaffected

The substitute part RF55-33F-T-00-50-A-SH meets all critical electrical and mechanical parameters within these allowable ranges. Variations in center contact material (Brass vs. Phosphor Bronze) and body finish options (Gold vs. Gold/Nickel) do not affect functional equivalence for this product category.

Parameter Comparison

Engineering Selection Recommendations

Both RF55-23F-T-00-50-G-A-SH and RF55-33F-T-00-50-A-SH are Active status components with identical ROHS3 compliance and REACH unaffected certifications. Selection between these parts should be based on inventory availability and application-specific requirements regarding contact material composition and finish specifications. Both parts maintain full regulatory compliance and are suitable for equivalent circuit applications within the specified electrical and thermal operating ranges.

Frequently Asked Questions (FAQ)

Q: Can RF55-33F-T-00-50-A-SH be used as a direct replacement for RF55-23F-T-00-50-G-A-SH?

A: Yes. Both parts share identical electrical specifications (50 Ohm impedance, 4 GHz maximum frequency), mechanical configuration (SMB Fakra plug, right-angle through-hole solder termination), and operating temperature range (-40°C to 85°C). Both are ROHS3 compliant and REACH unaffected.

Q: What are the differences between these substitute parts?

A: The primary differences are center contact material (Brass vs. Phosphor Bronze) and body finish options (Gold vs. Gold/Nickel combination). These material variations do not affect functional equivalence for 50 Ohm coaxial RF applications.

Q: Are there packaging or inventory considerations?

A: Both parts are supplied in Tray packaging. Current inventory shows RF55-23F-T-00-50-G-A-SH at 1009 pieces and RF55-33F-T-00-50-A-SH at 990 pieces. Selection may depend on supply chain lead times and project delivery schedules.

Q: Do these parts require different PCB layout or assembly procedures?

A: No. Both parts use identical through-hole right-angle solder termination and mounting configuration, requiring no changes to PCB design or assembly processes.

Q: Are both parts suitable for high-frequency RF applications?

A: Yes. Both parts are rated for operation up to 4 GHz and are designed for 50 Ohm coaxial RF connector applications.