RF292APG Equivalent & Substitute Parts

Part Overview

The RF292APG is a 2.92mm coaxial connector plug manufactured by Bulgin, designed for cable termination in RF applications. This male pin connector operates at frequencies up to 40 GHz with 50 Ohm impedance and features solder termination for both center contact and shield. The part is Active in product status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

RF292APG

BulginIn Stock: 1043RF292APG Datasheet

Current PartRFQ

PRF92-P-C-EE-085A-SD

Samtec Inc.In Stock: 1145PRF92-P-C-EE-085A-SD Datasheet

Parametric EquivalentRFQ

PRF92-P-C-EE-118-SD

Samtec Inc.In Stock: 715PRF92-P-C-EE-118-SD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RF292APG are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence:

• Connector style: 2.92mm
• Connector type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency maximum: 40 GHz
• Number of ports: 1

Mechanical Equivalence:

• Contact termination: Solder
• Shield termination: Solder
• Mounting type: Free Hanging (In-Line)
• Fastening type: Threaded
• Center contact material: Beryllium Copper
• Body material: Stainless Steel
• Housing color: Silver

Compliance Equivalence:

• RoHS Status: ROHS3 Compliant
• ECCN: EAR99
• HTSUS: 8536.69.4010

The substitute parts PRF92-P-C-EE-085A-SD and PRF92-P-C-EE-118-SD, both manufactured by Samtec Inc., meet all critical electrical and mechanical parameters. Differences in dielectric material (PTFE versus PEI) and center contact plating (Gold versus unspecified) do not affect functional equivalence within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RF292APG, PRF92-P-C-EE-085A-SD, and PRF92-P-C-EE-118-SD—are Active products with ROHS3 compliance and EAR99 export classification. Selection between these parts is based on availability and supply chain requirements rather than functional differences.

RF292APG (Bulgin): Primary choice with highest inventory (1029 units). Suitable for applications requiring established Bulgin supply relationships.

PRF92-P-C-EE-085A-SD (Samtec): Direct substitute with 1036 units in stock. Samtec PRF series provides equivalent performance with comparable availability.

PRF92-P-C-EE-118-SD (Samtec): Direct substitute with 642 units in stock. Suitable when Samtec supply chain is preferred, with lower inventory levels.

All parts meet the specified electrical, mechanical, and compliance requirements for 2.92mm 50 Ohm RF connector applications operating to 40 GHz.

Frequently Asked Questions (FAQ)

Q: Can PRF92-P-C-EE-085A-SD and PRF92-P-C-EE-118-SD be used interchangeably with RF292APG?

A: Yes. Both Samtec parts meet all critical electrical and mechanical parameters: 2.92mm connector style, Plug Male Pin type, 50 Ohm impedance, solder termination, threaded fastening, and 40 GHz frequency rating. All three parts are ROHS3 compliant with identical ECCN and HTSUS classifications.

Q: What is the difference between the two Samtec substitute parts?

A: PRF92-P-C-EE-085A-SD and PRF92-P-C-EE-118-SD are functionally equivalent across all specified parameters. Differences in part number designation reflect internal Samtec product variants. Both are suitable substitutes for RF292APG.

Q: Are there differences in dielectric material between the parts?

A: RF292APG uses Polyetherimide (PEI) dielectric, while both Samtec parts use Polytetrafluoroethylene (PTFE). Both materials are suitable for 50 Ohm RF applications at 40 GHz. This difference does not affect functional equivalence within the specified parameter set.

Q: Does center contact plating affect substitution?

A: RF292APG center contact plating is not specified in the provided parameters. Samtec parts feature Gold plating. Both configurations are suitable for solder termination applications. Plating differences do not affect functional equivalence for the specified electrical and mechanical requirements.

Q: What is the operating temperature range for these connectors?

A: RF292APG operates from -65°C to 165°C. Operating temperature specifications are not provided for the Samtec substitute parts within the available parameters.

Q: Are all parts suitable for the same cable applications?

A: Yes. All three parts are designed for cable termination with identical connector style, impedance, and termination method. They are suitable for equivalent RF cable applications.

Q: What is the mating cycle rating?

A: RF292APG has a mating cycle rating of 500. Mating cycle specifications are not provided for the Samtec substitute parts within the available parameters.