RF292A4PCCC Equivalent & Substitute Parts

Part Overview

The RF292A4PCCC is a 2.92mm coaxial connector plug manufactured by Bulgin, designed for panel mount applications with through-hole solder termination. This connector operates at frequencies up to 40 GHz with 50 Ohm impedance and is rated for 250 V operation across a temperature range of -40°C to 85°C. The part is currently active in production status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for component interchangeability in system designs where specific mounting configurations or packaging variations are acceptable.

Substiute Parts

RF292A4PCCC

BulginIn Stock: 1099RF292A4PCCC Datasheet

Current PartRFQ

RF292A2PEGDK

BulginIn Stock: 1171RF292A2PEGDK Datasheet

Parametric EquivalentRFQ

RF292A4PCCA

BulginIn Stock: 1050RF292A4PCCA Datasheet

Parametric EquivalentRFQ

RF292A4PCCDK

BulginIn Stock: 981RF292A4PCCDK Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RF292A4PCCC are identified based on strict equivalence of electrical and mechanical parameters. The primary substitution criteria are:

Electrical Parameters (Must Match):

• Connector Style: 2.92mm
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 40 GHz
• Contact Termination: Solder
• Shield Termination: Solder
• Voltage Rating: 250 V
• Operating Temperature: -40°C ~ 85°C
• Mating Cycles: 500

Mechanical Parameters (Must Match):

• Mounting Type: Panel Mount, Through Hole
• Mounting Feature: Flange
• Center Contact Material: Beryllium Copper
• Body Material: Stainless Steel
• Dielectric Material: Polyetherimide (PEI)

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts maintain these core parameters. Variations in mounting hole configuration (4-hole versus 2-hole) represent the only mechanical difference and do not affect electrical performance or connector interface compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the RF292A4PCCC. Selection among these alternatives is determined by mounting hole configuration requirements and inventory availability.

RF292A4PCCA and RF292A4PCCDK are direct mechanical equivalents with identical 4-hole flange mounting configurations. Both parts are active in production status and ROHS3 compliant. Selection between these two and the primary part RF292A4PCCC is based on procurement lead time and inventory availability.

RF292A2PEGDK provides electrical and functional equivalence but features a 2-hole mounting configuration instead of 4-hole. This part is suitable for applications where panel mounting geometry accommodates 2-hole flange attachment. This variant offers the highest current inventory level at 1128 pieces.

All parts share identical compliance certifications (ROHS3, MSL 1) and are manufactured by Bulgin under the RF292 base product series. Selection should be based on specific panel mounting hole patterns required by the application design.

Frequently Asked Questions (FAQ)

Q: Can RF292A4PCCA be used as a direct replacement for RF292A4PCCC?

A: Yes. Both parts are electrically and mechanically equivalent 2.92mm coaxial connectors with 4-hole flange mounting. They share identical impedance (50 Ohms), frequency rating (40 GHz), termination methods (solder), and operating specifications. The parts are interchangeable in applications requiring 4-hole panel mount configuration.

Q: What is the difference between RF292A4PCCC and RF292A2PEGDK?

A: The primary difference is the mounting hole configuration. RF292A4PCCC features 4-hole flange mounting, while RF292A2PEGDK features 2-hole flange mounting. All electrical parameters, impedance, frequency rating, and operating temperature specifications are identical. Selection depends on the panel mounting hole pattern required by the application.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. RF292A4PCCA, RF292A4PCCDK, and RF292A2PEGDK are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the compliance status of RF292A4PCCC.

Q: Can these connectors be used interchangeably in high-frequency applications?

A: Yes. All listed parts maintain 50 Ohm impedance and support frequencies up to 40 GHz. They are electrically equivalent for RF applications within this frequency range. Mechanical compatibility depends on the specific mounting hole configuration available on the panel.

Q: What is the operating temperature range for these connectors?

A: All substitute parts operate across -40°C to 85°C, providing equivalent thermal performance for the RF292A4PCCC.

Q: Are there any differences in contact materials between the substitute parts?

A: No. All parts use Beryllium Copper center contacts and Stainless Steel bodies with Polyetherimide (PEI) dielectric material, ensuring consistent electrical and mechanical performance.