Bulgin RF292A2PEGDP Equivalent & Substitute Parts

Part Overview

The Bulgin RF292A2PEGDP is a 2.92mm coaxial connector plug with male pin configuration, designed for 50 Ohm RF applications. This connector features panel mount through-hole solder termination with a two-hole flange mounting configuration. The part is Active in product status and maintains full ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Alternative equivalent parts are available to accommodate different mounting hole configurations while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

RF292A2PEGDP

BulginIn Stock: 749RF292A2PEGDP Datasheet

Current PartRFQ

RF292A2PEGDK

BulginIn Stock: 1171RF292A2PEGDK Datasheet

Parametric EquivalentRFQ

RF292A4PCCA

BulginIn Stock: 1050RF292A4PCCA Datasheet

Parametric EquivalentRFQ

RF292A4PCCDK

BulginIn Stock: 981RF292A4PCCDK Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RF292A2PEGDP is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Parameters:

• Connector style (2.92mm)
• Impedance (50 Ohms)
• Maximum frequency (40 GHz)
• Contact and shield termination method (Solder)

Mechanical Compatibility Parameters:

• Connector type (Plug, Male Pin)
• Mounting type (Panel Mount, Through Hole)
• Mounting feature (Flange)
• Operating temperature range (-40°C ~ 85°C)
• Voltage rating (250 V)
• Mating cycles (500)

Material and Compliance Parameters:

• Center contact material (Beryllium Copper)
• Body material (Stainless Steel)
• Dielectric material (Polyetherimide)
• RoHS3 compliance
• MSL rating (1)

The primary distinction among substitute parts is the number of mounting holes in the flange configuration. The RF292A2PEGDP features a two-hole flange, while alternative equivalents RF292A4PCCA and RF292A4PCCDK feature four-hole flanges. All other electrical and mechanical parameters remain identical, making these parts interchangeable when panel mounting hole patterns accommodate the respective flange configurations.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and full ROHS3 compliance, ensuring long-term availability and regulatory conformance for production applications.

RF292A2PEGDK is a direct parametric equivalent to the RF292A2PEGDP, sharing identical mounting hole configuration (2-hole flange). This part is suitable for direct replacement in existing designs without panel modification.

RF292A4PCCA and RF292A4PCCDK feature four-hole flange mounting configurations. These parts are electrically and mechanically equivalent to the RF292A2PEGDP but require panel designs with four mounting holes instead of two. Selection between these four-hole variants depends on panel layout requirements and mechanical fastening specifications.

All substitute parts are manufactured by Bulgin under the RF292 base product series, ensuring consistent quality and performance across the product family. Selection should be based on panel mounting hole pattern compatibility and mechanical fastening requirements specific to the application.

Frequently Asked Questions (FAQ)

Q: Can RF292A2PEGDK be used as a direct replacement for RF292A2PEGDP?

A: Yes. RF292A2PEGDK is a parametric equivalent with identical electrical specifications (2.92mm, 50 Ohms, 40 GHz maximum frequency), mechanical configuration (2-hole flange panel mount), and material composition. Both parts are Active status with ROHS3 compliance.

Q: What is the primary difference between the two-hole and four-hole flange variants?

A: The RF292A2PEGDP and RF292A2PEGDK feature two mounting holes in the flange, while RF292A4PCCA and RF292A4PCCDK feature four mounting holes. All other electrical and mechanical parameters are identical. Selection depends on panel design and mechanical fastening requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. RF292A2PEGDP, RF292A2PEGDK, RF292A4PCCA, and RF292A4PCCDK are all ROHS3 compliant with MSL rating of 1 (Unlimited).

Q: Do substitute parts operate within the same temperature range?

A: Yes. All substitute parts operate across the identical temperature range of -40°C to 85°C with 250 V voltage rating and 500 mating cycles.

Q: What materials are used in the center contact and body?

A: All parts use Beryllium Copper for the center contact and Stainless Steel for the body, with Polyetherimide (PEI) as the dielectric material.

Q: Can four-hole flange parts be used in applications designed for two-hole flanges?

A: Four-hole flange parts (RF292A4PCCA, RF292A4PCCDK) require panel designs with four mounting holes. They cannot be used in two-hole mounting patterns without panel modification.

Q: Are all substitute parts available in equivalent inventory quantities?

A: Inventory levels vary. RF292A2PEGDP has 667 units, RF292A2PEGDK has 1128 units, RF292A4PCCA has 972 units, and RF292A4PCCDK has 922 units in stock.