RF292A2PCEE Equivalent & Substitute Parts

Part Overview

The RF292A2PCEE is a 2.92mm coaxial connector plug manufactured by Bulgin, designed for panel mount applications with male pin configuration and 50 ohm impedance. This connector operates at frequencies up to 40 GHz and utilizes compression contact termination with screw shield termination. The part is currently active in production status with 982 pieces available in new original inventory. Equivalent substitute parts are identified to provide procurement flexibility, ensure supply chain continuity, and support component standardization across manufacturing environments.

Substiute Parts

RF292A2PCEE

BulginIn Stock: 1067RF292A2PCEE Datasheet

Current PartRFQ

RF292A2PEGA

BulginIn Stock: 1009RF292A2PEGA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RF292A2PCEE are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are established through the following key parameters:

Electrical Parameters:

• Connector style: 2.92mm
• Impedance: 50 Ohms
• Frequency maximum: 40 GHz
• Voltage rating: 250 V

Mechanical Parameters:

• Connector type: Plug, Male Pin
• Mounting type: Panel Mount with Flange
• Contact termination: Compression
• Shield termination: Screw
• Fastening type: Threaded

Material & Environmental Parameters:

• Center contact material: Beryllium Copper
• Body material: Stainless Steel
• Dielectric material: Polyetherimide (PEI)
• Operating temperature range: -40°C ~ 85°C
• Mating cycles: 500

Compliance Parameters:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes for the RF292A2PCEE.

Parameter Comparison

Engineering Selection Recommendations

The RF292A2PEGA is a direct parametric equivalent to the RF292A2PCEE. Both parts are manufactured by Bulgin and share identical electrical, mechanical, and material specifications. Both parts maintain active production status and carry ROHS3 compliance certification. The RF292A2PEGA is suitable for direct substitution in applications requiring 2.92mm coaxial connectors with 50 ohm impedance, panel mount configuration, and operation up to 40 GHz. Selection between these parts may be based on inventory availability, procurement lead times, or supply chain preferences, as no technical differentiation exists between the two part numbers.

Frequently Asked Questions (FAQ)

Q: Can RF292A2PEGA be used as a direct replacement for RF292A2PCEE?

A: Yes. The RF292A2PEGA is a parametric equivalent with identical electrical specifications (50 ohms, 40 GHz maximum frequency), mechanical configuration (2.92mm plug, male pin, panel mount flange), contact termination method (compression), and material composition (beryllium copper center contact, stainless steel body, polyetherimide dielectric). Both parts operate across the same temperature range (-40°C to 85°C) and carry identical compliance certifications.

Q: Are there any differences in mating compatibility between these parts?

A: No. Both parts utilize identical 2.92mm connector geometry, male pin configuration, and compression contact termination. Mating cycles are identical at 500 cycles for both parts.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both RF292A2PCEE and RF292A2PEGA are ROHS3 compliant with moisture sensitivity level 1 (unlimited). Both operate within the temperature range of -40°C to 85°C and carry identical voltage ratings of 250 V.

Q: What is the difference between the two part numbers?

A: The part numbers differ only in their suffix designation (PCEE versus PEGA). All specified electrical, mechanical, and material parameters are identical. The difference may reflect internal Bulgin manufacturing or distribution coding but does not indicate any functional or performance variation.

Q: Can these parts be intermixed in the same assembly?

A: Yes. Since both parts are parametric equivalents with identical specifications, they can be used interchangeably within the same assembly or application without modification to mechanical interfaces, electrical performance, or environmental operating conditions.