Bulgin RF292A2PCEDP 2.92mm Coaxial Connector Equivalent & Substitute Parts

Part Overview

The Bulgin RF292A2PCEDP is a 2.92mm coaxial connector plug with male pin configuration, designed for 50 Ohm RF applications up to 40 GHz. This panel mount, through-hole solder connector features a flanged mounting design with two mounting holes and is constructed from stainless steel with beryllium copper center contacts. The part maintains Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified to support design flexibility, inventory optimization, and supply chain continuity for applications requiring compatible 2.92mm coaxial connector solutions.

Substiute Parts

RF292A2PCEDP

BulginIn Stock: 887RF292A2PCEDP Datasheet

Current PartRFQ

RF292A2PEGDK

BulginIn Stock: 1171RF292A2PEGDK Datasheet

Parametric EquivalentRFQ

RF292A4PCCA

BulginIn Stock: 1050RF292A4PCCA Datasheet

Parametric EquivalentRFQ

RF292A4PCCDK

BulginIn Stock: 981RF292A4PCCDK Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RF292A2PCEDP is determined by strict equivalence across the following critical parameters: connector style (2.92mm), connector type (plug, male pin), impedance (50 Ohms), mounting type (panel mount, through hole), contact and shield termination (solder), frequency capability (40 GHz maximum), operating temperature range (-40°C ~ 85°C), voltage rating (250 V), mating cycles (500), center contact material (beryllium copper), body material (stainless steel), and dielectric material (polyetherimide). All substitute parts maintain identical electrical and mechanical specifications across these parameters.

The primary distinction among substitute parts is the mounting hole configuration. The RF292A2PCEDP features a two-hole flange mount, while RF292A4PCCA and RF292A4PCCDK feature four-hole flange mounts. This difference affects panel layout and mechanical integration but does not alter electrical performance or RF characteristics. Selection between two-hole and four-hole variants depends solely on mechanical mounting requirements and panel design specifications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and full ROHS3 compliance, ensuring regulatory alignment with current environmental and safety standards. Selection between RF292A2PCEDP and RF292A2PEGDK is based on identical electrical and mechanical specifications; both feature two-hole flange mounting and are directly interchangeable for applications requiring this specific hole configuration.

Selection between two-hole variants (RF292A2PCEDP, RF292A2PEGDK) and four-hole variants (RF292A4PCCA, RF292A4PCCDK) is determined by panel mounting hole layout requirements. The four-hole configuration provides enhanced mechanical stability and load distribution across a larger mounting footprint, suitable for applications with higher vibration or mechanical stress. The two-hole configuration is appropriate for standard panel mount applications with conventional spacing requirements.

Between the two four-hole options, RF292A4PCCA and RF292A4PCCDK are electrically and mechanically equivalent and interchangeable. Selection may be based on inventory availability or supply chain considerations, as both maintain identical performance specifications and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can RF292A2PEGDK be used as a direct replacement for RF292A2PCEDP?

A: Yes. RF292A2PEGDK is a parametric equivalent to RF292A2PCEDP. Both parts share identical electrical specifications (50 Ohm impedance, 40 GHz maximum frequency), mechanical configuration (2.92mm connector, male pin plug, two-hole flange mount), termination method (solder), materials (stainless steel body, beryllium copper center contact, polyetherimide dielectric), operating temperature range (-40°C ~ 85°C), voltage rating (250 V), and compliance status (ROHS3 compliant). Direct substitution is supported without design modification.

Q: What is the difference between two-hole and four-hole mounting variants?

A: The RF292A2PCEDP and RF292A2PEGDK feature two mounting holes in the flange, while RF292A4PCCA and RF292A4PCCDK feature four mounting holes. This difference affects only the mechanical mounting configuration and panel layout. All electrical and RF performance characteristics remain identical. Selection depends on panel design specifications and available mounting hole spacing.

Q: Are RF292A4PCCA and RF292A4PCCDK interchangeable?

A: Yes. RF292A4PCCA and RF292A4PCCDK are parametric equivalents with identical electrical specifications, mechanical configuration (four-hole flange mount), materials, and compliance certifications. Both are suitable for direct substitution in applications requiring four-hole mounting.

Q: Can a four-hole variant replace a two-hole variant in an existing design?

A: Four-hole variants cannot be used as direct replacements for two-hole variants without panel modification. The mounting hole pattern differs, requiring changes to the panel layout. Conversely, two-hole variants cannot replace four-hole variants due to insufficient mounting holes. Selection must match the specific panel mounting hole configuration.

Q: What compliance certifications apply to all substitute parts?

A: All parts listed are ROHS3 compliant and maintain Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions. All parts are classified under ECCN EAR99 and HTSUS 8536.69.4010 for export and tariff purposes.

Q: Are there inventory considerations when selecting between substitute parts?

A: Current inventory levels are: RF292A2PCEDP (797 pcs), RF292A2PEGDK (1128 pcs), RF292A4PCCA (972 pcs), and RF292A4PCCDK (922 pcs). Inventory availability may influence selection timing but does not affect technical compatibility or performance characteristics.