RF292A2PCEB Equivalent & Substitute Parts

Part Overview

The RF292A2PCEB is a 2.92mm coaxial connector plug manufactured by Bulgin, designed for panel mount applications with male pin configuration and 50 ohm impedance. This connector operates at frequencies up to 40 GHz and utilizes compression contact termination with screw shield termination. The part is currently active in production status with 846 pieces available in inventory. Equivalent substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate additional suppliers.

Substiute Parts

RF292A2PCEB

BulginIn Stock: 928RF292A2PCEB Datasheet

Current PartRFQ

RF292A2PEGA

BulginIn Stock: 1009RF292A2PEGA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RF292A2PCEB with equivalent parts is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part RF292A2PEGA shares identical specifications across the following key parameters:

• Connector style and type (2.92mm Plug, Male Pin)
• Electrical characteristics (50 ohm impedance, 40 GHz maximum frequency)
• Mechanical configuration (panel mount with flange, compression contact termination, screw shield termination)
• Material composition (beryllium copper center contact, stainless steel body, polyetherimide dielectric)
• Environmental ratings (operating temperature range -40°C to 85°C, 250 V voltage rating)
• Reliability specifications (500 mating cycles)
• Regulatory compliance (ROHS3 compliant, MSL 1)

Both parts are manufactured by Bulgin under the same base product number RF292 and maintain identical functional and physical characteristics, enabling direct substitution in applications requiring 2.92mm coaxial connectors with the specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both RF292A2PCEB and RF292A2PEGA are active production parts manufactured by Bulgin with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and supply chain requirements rather than technical differentiation.

The RF292A2PCEB is suitable for applications requiring 2.92mm coaxial connectors with panel mount configuration, compression termination, and operation up to 40 GHz. The RF292A2PEGA provides an equivalent alternative with identical performance characteristics and higher current inventory availability (986 pieces versus 846 pieces).

Both parts maintain the same regulatory classification (EAR99, HTSUS 8536.69.4010) and environmental specifications, supporting deployment in industrial RF applications with operating temperatures from -40°C to 85°C and 250 V voltage rating.

Frequently Asked Questions (FAQ)

Q: Can RF292A2PEGA be used as a direct replacement for RF292A2PCEB?

A: Yes. Both parts are manufactured by Bulgin with identical specifications across all electrical, mechanical, and environmental parameters. They share the same connector style, impedance, frequency rating, mounting configuration, and material composition.

Q: What are the key parameters that define substitution eligibility for this connector type?

A: Substitution eligibility is determined by equivalence in connector style (2.92mm), connector type (plug, male pin), impedance (50 ohms), mounting type (panel mount with flange), contact termination method (compression), shield termination (screw), maximum frequency (40 GHz), operating temperature range (-40°C to 85°C), voltage rating (250 V), and material composition (beryllium copper center contact, stainless steel body, polyetherimide dielectric).

Q: Are there any differences in packaging or delivery format between these parts?

A: Both parts are supplied in bulk packaging format. The primary difference is inventory availability, with RF292A2PEGA currently stocked at 986 pieces and RF292A2PCEB at 846 pieces.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both RF292A2PCEB and RF292A2PEGA are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), EAR99 export classification, and HTSUS code 8536.69.4010.

Q: What is the maximum operating frequency for these connectors?

A: Both connectors operate at a maximum frequency of 40 GHz, supporting high-frequency RF applications.

Q: How many mating cycles are these connectors rated for?

A: Both parts are rated for 500 mating cycles, defining the expected mechanical durability for connection and disconnection operations.