RF292A2PCEA Equivalent & Substitute Parts

Part Overview

The RF292A2PCEA is a 2.92mm coaxial connector plug manufactured by Bulgin, designed for panel mount applications with male pin configuration and 50 Ohm impedance. This connector operates at frequencies up to 40 GHz and utilizes compression contact termination with screw shield termination. The part is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Key Parameters

Parameter	Value
Connector Style	2.92mm
Connector Type	Plug, Male Pin
Impedance	50 Ohms
Mounting Type	Panel Mount
Mounting Feature	Flange
Contact Termination	Compression
Shield Termination	Screw
Frequency - Max	40 GHz
Operating Temperature	-40°C ~ 85°C
Voltage Rating	250 V
Mating Cycles	500
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of RF292A2PCEA with RF292A2PEGA is based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical parameters that define connector functionality and interchangeability:

Key Parameters for Substitution Validation:

Connector style (2.92mm)
Connector type (Plug, Male Pin)
Impedance (50 Ohms)
Mounting configuration (Panel Mount with Flange)
Contact and shield termination methods (Compression and Screw)
Frequency rating (40 GHz maximum)
Operating temperature range (-40°C ~ 85°C)
Voltage rating (250 V)
Mating cycle rating (500)
Compliance certifications (ROHS3)
Moisture sensitivity classification (MSL 1)

Both parts are manufactured by Bulgin under the same base product number RF292 and maintain identical material specifications including beryllium copper center contacts, stainless steel body, and polyetherimide dielectric material.

Parameter Comparison

Parameter	RF292A2PCEA	RF292A2PEGA	Match Status
Manufacturer	Bulgin	Bulgin	Identical
Category	Coaxial Connectors (RF)	Coaxial Connectors (RF)	Identical
Connector Style	2.92mm	2.92mm	Identical
Connector Type	Plug, Male Pin	Plug, Male Pin	Identical
Contact Termination	Compression	Compression	Identical
Shield Termination	Screw	Screw	Identical
Impedance	50 Ohms	50 Ohms	Identical
Mounting Type	Panel Mount	Panel Mount	Identical
Mounting Feature	Flange	Flange	Identical
Fastening Type	Threaded	Threaded	Identical
Frequency - Max	40 GHz	40 GHz	Identical
Number of Ports	1	1	Identical
Housing Color	Silver	Silver	Identical
Center Contact Material	Beryllium Copper	Beryllium Copper	Identical
Body Material	Stainless Steel	Stainless Steel	Identical
Dielectric Material	Polyetherimide (PEI)	Polyetherimide (PEI)	Identical
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	Identical
Voltage Rating	250 V	250 V	Identical
Mating Cycles	500	500	Identical
Base Product Number	RF292	RF292	Identical
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Identical
ECCN	EAR99	EAR99	Identical
HTSUS	8536.69.4010	8536.69.4010	Identical
Product Status	Active	Active	Identical

Engineering Selection Recommendations

RF292A2PEGA is a direct parametric equivalent to RF292A2PCEA and is suitable for substitution in applications requiring 2.92mm coaxial connectors with 50 Ohm impedance and panel mount flange configuration. Both parts maintain Active product status and ROHS3 compliance certification. Selection between these parts should be based on inventory availability and lead time requirements, as all electrical, mechanical, and environmental specifications are identical. Both parts are rated for operation across the -40°C to 85°C temperature range and support frequencies up to 40 GHz. The 500 mating cycle rating applies to both variants. No performance degradation or functional limitation results from substituting RF292A2PEGA for RF292A2PCEA in any application where the primary part number is specified.

Frequently Asked Questions (FAQ)

Q: Can RF292A2PEGA be used as a direct replacement for RF292A2PCEA?

A: Yes. RF292A2PEGA is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including connector style, impedance, frequency rating, operating temperature, voltage rating, and mating cycle rating are identical between the two part numbers.

Q: Are there any differences in material composition between these two connectors?

A: No. Both parts utilize beryllium copper center contacts, stainless steel body material, and polyetherimide dielectric material. Housing color is silver for both variants.

Q: What is the maximum frequency rating for both connectors?

A: Both RF292A2PCEA and RF292A2PEGA are rated for operation up to 40 GHz.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications.

Q: What is the operating temperature range for these connectors?

A: Both connectors operate across the temperature range of -40°C to 85°C.

Q: Are there any differences in mounting configuration?

A: No. Both parts feature identical panel mount configuration with flange mounting feature and threaded fastening type.

Q: What is the impedance specification for both connectors?

A: Both RF292A2PCEA and RF292A2PEGA are 50 Ohm impedance connectors.

Q: How many mating cycles are both connectors rated for?

A: Both parts are rated for 500 mating cycles.

Q: What is the moisture sensitivity level for these parts?

A: Both parts carry MSL 1 (Unlimited) moisture sensitivity classification.

Q: Are both parts currently in active production?

A: Yes. Both RF292A2PCEA and RF292A2PEGA maintain Active product status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message