RF240A4PCCDO Equivalent & Substitute Parts

Part Overview

The RF240A4PCCDO is a 2.4mm (APC-2.4, OS-50) coaxial connector plug manufactured by Bulgin, designed for panel mount applications with through-hole solder termination. This male pin connector operates at 50 Ohms impedance and supports frequencies up to 50 GHz, making it suitable for high-frequency RF applications. The part features a four-hole flange mounting configuration and is currently in active production status with 1062 units in stock. Equivalent substitute parts are necessary when specific mounting hole configurations, inventory availability, or procurement lead times require alternative part selection while maintaining electrical and mechanical compatibility.

Substiute Parts

RF240A4PCCDO

BulginIn Stock: 1074RF240A4PCCDO Datasheet

Current PartRFQ

RF240A2PEGGM

BulginIn Stock: 868RF240A2PEGGM Datasheet

Parametric EquivalentRFQ

RF240A4PCCGM

BulginIn Stock: 872RF240A4PCCGM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RF240A4PCCDO is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Connector style (2.4mm APC-2.4, OS-50)
• Connector type (Plug, Male Pin)
• Impedance (50 Ohms)
• Maximum frequency (50 GHz)
• Contact and shield termination method (Solder)
• Voltage rating (150 V)
• Operating temperature range (-40°C ~ 85°C)

Mechanical Compatibility Parameters:

• Mounting type (Panel Mount, Through Hole)
• Mounting feature (Flange)
• Center contact material (Beryllium Copper)
• Body material (Stainless Steel)
• Dielectric material (Polyetherimide)

Regulatory & Environmental Parameters:

• RoHS3 compliance
• Moisture sensitivity level (MSL 1)

The RF240A4PCCDO differs from substitute parts only in the number of mounting holes (four holes versus two holes in the RF240A2PEGGM variant). All other electrical, mechanical, and regulatory parameters remain identical across the substitute group. The RF240A4PCCGM represents an alternative sourcing option with identical specifications to the main part.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RF240A4PCCDO, RF240A2PEGGM, and RF240A4PCCGM—are active production components manufactured by Bulgin with ROHS3 compliance and identical electrical specifications. Selection between these parts is determined by mounting hole configuration requirements:

RF240A4PCCDO and RF240A4PCCGM are functionally equivalent four-hole flange mount connectors. Both parts satisfy identical electrical and mechanical requirements for 50 Ohm, 50 GHz RF applications. Selection between these two variants depends on procurement source, inventory availability, and lead time considerations.

RF240A2PEGGM provides a two-hole flange mount alternative. This part is electrically and mechanically compatible with the four-hole variants across all critical parameters but accommodates panel designs requiring two-hole mounting configurations instead of four-hole configurations.

All parts maintain identical performance across frequency response, impedance, temperature range, voltage rating, and mating cycle specifications. Component selection should be based on specific panel mounting hole requirements and current inventory availability.

Frequently Asked Questions (FAQ)

Q: Can RF240A2PEGGM be used as a direct replacement for RF240A4PCCDO?

A: RF240A2PEGGM is electrically and mechanically equivalent to RF240A4PCCDO across all RF performance parameters, impedance, frequency response, and environmental specifications. The difference is the mounting hole configuration: RF240A2PEGGM features two mounting holes while RF240A4PCCDO features four mounting holes. Substitution is valid only if the panel design accommodates two-hole mounting instead of four-hole mounting.

Q: What is the difference between RF240A4PCCDO and RF240A4PCCGM?

A: Both parts are identical in electrical specifications, mechanical design, and performance characteristics. Both feature four-hole flange mounting and operate at 50 Ohms across 50 GHz frequency range. The parts differ only in manufacturer sourcing or internal production batching. Either part satisfies the same application requirements.

Q: Are all three parts RoHS compliant?

A: Yes. RF240A4PCCDO, RF240A2PEGGM, and RF240A4PCCGM are all ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What determines whether a substitute part is compatible?

A: Compatibility is determined by equivalence across connector style (2.4mm APC-2.4, OS-50), connector type (Plug, Male Pin), impedance (50 Ohms), maximum frequency (50 GHz), termination method (Solder), operating temperature range (-40°C ~ 85°C), voltage rating (150 V), and material specifications (Beryllium Copper center contact, Stainless Steel body, Polyetherimide dielectric). Mounting hole count is the only variable parameter among the substitute group.

Q: Can these connectors be used in applications requiring frequencies above 50 GHz?

A: No. The maximum frequency specification for all three parts is 50 GHz. Applications requiring higher frequency operation require alternative connector designs.

Q: What is the operating temperature range for these connectors?

A: All three parts operate across -40°C to 85°C. This range applies to both electrical performance and mechanical integrity.